--- title: "\"Евросредиземноморское соглашение, учреждающее ассоциацию между Иорданским Хашимитским Королевством, с одной стороны, и Европейскими сообществами и их государствами-членами, с другой стороны\" [рус., англ.]" number: "1" status: действует canonical: "https://bukva.ai/docs/soglashenie-1-15" --- ## "Евросредиземноморское соглашение, учреждающее ассоциацию между Иорданским Хашимитским Королевством, с одной стороны, и Европейскими сообществами и их государствами-членами, с другой стороны" [рус., англ.] (Вместе со <Списками промышленных товаров, производимых Сообществом, ограничений, работ или процессов>, <Интеллектуальной, индустриальной и коммерческой собственностью>, <Протоколами относительно мер, применимых к импорту в Сообщество и Иорданию, определения понятия "производимый товар" и методов сотрудничества, о взаимной помощи между административными властями в таможенных делах>, <Вводными примечаниями к списку>, <Свидетельством движения eur.1>, <Декларацией счета>) [англ.] (Заключено в г. Брюсселе 24.11.1997) > [!IMPORTANT] > Соглашение вступило в силу 01.05.2002. > Текст Соглашения на английском языке см. в документе.
[неофициальный перевод] <*>
**ЕВРОСРЕДИЗЕМНОМОРСКОЕ СОГЛАШЕНИЕ,** **УЧРЕЖДАЮЩЕЕ АССОЦИАЦИЮ МЕЖДУ ИОРДАНСКИМ** **ХАШИМИТСКИМ КОРОЛЕВСТВОМ, С ОДНОЙ СТОРОНЫ, И ЕВРОПЕЙСКИМИ** **СООБЩЕСТВАМИ И ИХ ГОСУДАРСТВАМИ-ЧЛЕНАМИ,** С ДРУГОЙ СТОРОНЫ <**>
(Брюссель, 24 ноября 1997 года)
--- <*> Перевод к.ю.н. Калиниченко П.А. <**> ОЖ L 129, 15.05.2002, с. 3. Иорданское Хашимитское Королевство, далее именуемое "Иордания", с одной стороны, и Королевство Бельгия, Королевство Дании, Федеративная Республика Германия, Греческая Республика, Королевство Испания, Французская Республика, Ирландия, Итальянская Республика, Великое Герцогство Люксембург, Королевство Нидерландов, Республика Австрия, Португальская Республика, Республика Финляндия, Королевство Швеция, Соединенное Королевство Великобритании и Северной Ирландии, Договаривающиеся Стороны [Договора](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-1), учреждающего Европейское сообщество, [Договора](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo/statya-1), учреждающего Европейское объединение угля и стали, далее именуемые "государства-члены", и Европейское сообщество, Европейское объединение угля и стали, далее именуемые "Сообщество", с другой стороны, принимая во внимание важность традиционных связей, существующих между Иорданией и Сообществом и его государствами-членами, и общие ценности, которые они разделяют; признавая, что Иордания и Сообщество желают укрепить эти связи и установить долгосрочные отношения, основывающиеся на взаимодействии, партнерстве и будущей интеграции экономики Иордании в европейскую экономику; принимая во внимание ту важность, которая придается Сторонами принципам [Устава](https://bukva.ai/docs/ustav-organizatsii-obedinennyh-natsiy/statya-1) Организации Объединенных Наций, в частности уважения прав человека, демократии, политических и экономических свобод, составляющие саму основу ассоциации; признавая текущее политическое и экономическое развитие на европейском континенте и на Ближнем Востоке в последнее время; признавая необходимость объединения усилий по укреплению политической стабильности и экономического развития в регионе путем содействия региональному сотрудничеству; желая установить регулярный политический диалог по двусторонним и международным вопросам, представляющим взаимный интерес; признавая необходимость прогресса в сторону социальной и экономической модернизации Иордании в целях достижения полной интеграции ее экономики в мировую экономику и участия в сообществе демократических наций; памятуя об экономических и социальных различиях между Сообществом и Иорданией; желая установить сотрудничество на основе регулярного диалога по экономическим, социальным и культурным вопросам в целях улучшения взаимопонимания; признавая обязательство Иордании и Сообщества по свободной торговле в соответствии с правами и обязанностями, проистекающими из Генерального [соглашения](https://bukva.ai/docs/generalnoe-soglashenie-po-tarifam-i-torgovle-vsemirnaya-torgovaya) по тарифам и торговле 1994 г. (ГАТТ); будучи убеждены в том, что Соглашение об ассоциации создаст благоприятный климат для развития экономических отношений между Сторонами, и в частности, для развития торговли и инвестиций, а также экономики и технологического сотрудничества, согласились о нижеследующем: ## Статья 1 ### Статья 1 1. Настоящим учреждается ассоциация между Иорданией, с одной стороны, и Сообществом и его государствами-членами, с другой стороны. 2. Целями этой ассоциации являются: - обеспечение соответствующих рамок для политического диалога между Сторонами, способствующего развитию тесных отношений между ними в этой области; - создание условий для поступательной либерализации торговли товарами, услугами и капиталом; - расширение сбалансированных экономических и социальных отношений между Сторонами, в особенности путем диалога и сотрудничества; - повышение условий жизни и занятости, а также роста производства и финансовой стабильности; - содействие региональному сотрудничеству в целях консолидации мирного сосуществования, экономической и политической стабильности; - обеспечение сотрудничества в других сферах, представляющих взаимный интерес. ## Статья 2 ### Статья 2 Отношения между Сторонами, а равно и все положения настоящего Соглашения, основываются на уважении демократических принципов и прав человека, определяющих внутреннюю и внешнюю политику Сторон, и составляющих существенный элемент настоящей ассоциации. ## Статья 3 ### РАЗДЕЛ I. ПОЛИТИЧЕСКИЙ ДИАЛОГ #### Статья 3 1. Между Сторонами устанавливается регулярный политический диалог. Он нацелен на создание долгосрочных связей в духе солидарности между Сторонами. 2. Политический диалог и сотрудничество, в частности: - содействуют сближению Сторон путем большего взаимопонимания и сближению позиций по международным вопросам, представляющим взаимный интерес, в частности, по тем, которые имеют принципиальный характер для одной или обеих Сторон; - предоставляют возможность каждой из Сторон представлять собственную позицию и интересы; - обеспечивают укрепление региональной безопасности и стабильности; - поддерживают общие инициативы. ## Статья 4 #### Статья 4 Политический диалог охватывает все проблемы, представляющие общий интерес, в частности, необходимые меры по обеспечению мира, безопасности и регионального развития. ## Статья 5 #### Статья 5 1. Политический диалог облегчает реализацию совместных инициатив и имеет место, в частности: a) на министерском уровне, в основном в рамках Совета ассоциации; b) на уровне старших должностных лиц, представляющих Иорданию, с одной стороны, и Председателя Совета Европейского Союза, а также Комиссии Европейских сообществ, с другой стороны; c) путем полного использования возможностей дипломатических каналов, включая регулярные брифинги должностных лиц, консультации в рамках международных встреч и контакты между дипломатическими представителями в третьих странах; d) при необходимости, путем любых других средств, которые будут способствовать укреплению, развитию и совершенствованию этого диалога и повышению его эффективности. 2. Устанавливается политический диалог между Европейским парламентом и Парламентом Иордании.
**РАЗДЕЛ II. СВОБОДНОЕ ДВИЖЕНИЕ ТОВАРОВ**
## Статья 6. ОСНОВНЫЕ ПРИНЦИПЫ #### Статья 6. **ОСНОВНЫЕ ПРИНЦИПЫ** Сообщество и Иордания поступательно учреждают зону свободной торговли с переходным периодом максимум в 12 лет, начиная с момента вступления в силу настоящего Соглашения, в соответствии с положениями настоящего Соглашения и при совместимости с Генеральным [соглашением](https://bukva.ai/docs/generalnoe-soglashenie-po-tarifam-i-torgovle-vsemirnaya-torgovaya) по тарифам и торговле 1994 г., далее именуемого, как ГАТТ. **ПРОМЫШЛЕННЫЕ ТОВАРЫ** ## Статья 7 ## Глава I ##### Статья 7 Положения настоящей главы применяются к товарам, произведенным в Сообществе и в Иордании иным, чем предусмотрены в приложении II к [Договору](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-1) об учреждении Европейского сообщества. ## Статья 8 ##### Статья 8 Новые таможенные пошлины на импорт, а также сборы, имеющие равнозначный эффект не могут вводиться между Сообществом и Иорданией. ## Статья 9 ##### Статья 9 Товары, произведенные в Иордании, импортируются в Сообщество свободно от таможенных пошлин и платежей, имеющих равнозначный эффект, а также количественных ограничений и мер, имеющих эквивалентный эффект. ## Статья 10 ##### Статья 10 1. a) Положения настоящей главы не исключают сохранения Сообществом сельскохозяйственного компонента пошлин, применяемых к товарам, произведенным в Иордании и перечисленным в [Приложении I](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101198). b) Такой сельскохозяйственный компонент может иметь форму единой расчетной ставки или пошлины ad valorem. c) Положения [главы II](https://bukva.ai/docs/soglashenie-1-15/statya-14#p100109), применимые к сельскохозяйственным товарам применяются к сельскохозяйственному компоненту mutatis mutandis. 2. a) Положения настоящей главы не исключают введения Иордании сельскохозяйственного компонента, применяемого к товарам, перечисленным в [Приложении II](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101248) в отношении товаров, произведенных в Сообществе. Сельскохозяйственный компонент может иметь форму единой расчетной ставки или пошлины ad valorem. b) Сельскохозяйственный компонент, который в соответствии с [подпараграфом "а"](https://bukva.ai/docs/soglashenie-1-15/statya-10#p100063) Иордания может вводить на импорт из Сообщества не может превышать 50% от ставки основной пошлины, взимаемой с импорта из стран пользующихся не преференциальным режимом, а режимом наиболее благоприятной нации. c) Если Иордания повысит эквивалентную пошлину, применимую к сельскохозяйственной продукции, перечисленной в [Приложении II](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101248), и превысит максимальную ставку, предусмотренную в [подпараграфе "b"](https://bukva.ai/docs/soglashenie-1-15/statya-10#p100064), Совет ассоциации может дать разрешение на такое превышение. d) Иордания может расширить перечень товаров, к которым применяется сельскохозяйственный компонент, включая их в [Приложение I](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101198). Перед принятием решения об этом, этот сельскохозяйственный компонент подлежит исследованию в рамках Комитета ассоциации, который может принять любое необходимое решение в этом вопросе. е) В случае если в отношении товаров, перечисленных в перечне 1 [Приложения II](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101248), произведенных в Сообществе, Иордания применяет на момент вступления в силу настоящего Соглашения импортные пошлины и сборы с равнозначным эффектом, они не должны быть выше тех, что существовали на 1 января 1996 г. 3. В отношении товаров, перечисленных в Приложении II, произведенных в Сообществе, Иордания отменяет промышленный компонент в соответствии с положениями [статьи 11](https://bukva.ai/docs/soglashenie-1-15/statya-11#p100071). 4. Если, в торговле между Сообществом и Иорданией снижаются сборы, применимые к основной сельскохозяйственной продукции, либо в результате взаимной уступки, сельскохозяйственный компонент, применяемым в соответствии с [параграфами 1](https://bukva.ai/docs/soglashenie-1-15/statya-10#p100060) и [2](https://bukva.ai/docs/soglashenie-1-15/statya-10#p100063) может быть снижен. 5. Снижение, предусмотренное параграфом 4, перечень соответствующих товаров и, если необходимо, тарифных квот, по которым снижение проводится, утверждаются Советом ассоциации. ## Статья 11 ##### Статья 11 1. Таможенные пошлины на импорт и меры, имеющие эквивалентный эффект, применяемые Иорданией к товарам, произведенным в Сообществе, которые не перечислены в [Приложениях II](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101248) - [IV](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101307), отменяются с момента вступления в силу настоящего Соглашения. 2. В соответствии с [параграфами 2 "b"](https://bukva.ai/docs/soglashenie-1-15/statya-10#p100064) и [3 статьи 10](https://bukva.ai/docs/soglashenie-1-15/statya-10#p100068), таможенные пошлины на импорт и меры, имеющие эквивалентный эффект, применяемые Иорданией к продовольственным полуфабрикатам, произведенным в Сообществе, которые перечислены в Приложении II отменяются постепенно в соответствии со следующим графиком: - через четыре года после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается на 10% от основной пошлины; - через пять лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается на 20% от основной пошлины; - через шесть лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается на 30% от основной пошлины; - через семь лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается на 40% от основной пошлины; - через восемь лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается на 50% от основной пошлины. 3. Таможенные пошлины на импорт, применяемые Иорданией к товарам, произведенным в Сообществе, которые перечислены в списке A [Приложения III](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101301) отменяются постепенно в соответствии со следующим графиком: - на момент вступления в силу настоящего Соглашения каждая пошлина или сбор снижается до 80% от основной пошлины; - через один год после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 60% от основной пошлины; - через два года после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 20% от основной пошлины; - через три года после вступления в силу настоящего Соглашения, упомянутые пошлины отменяются. 4. Таможенные пошлины на импорт, применяемые Иорданией к товарам, произведенным в Сообществе, которые перечислены в списке B [Приложения III](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101301) отменяются постепенно в соответствии со следующим графиком: - через четыре года после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 90% от основной пошлины; - через пять лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 80% от основной пошлины; - через шесть лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 70% от основной пошлины; - через семь лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 60% от основной пошлины; - через восемь лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 50% от основной пошлины; - через девять лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 40% от основной пошлины; - через десять лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 30% от основной пошлины; - через одиннадцать лет после вступления в силу настоящего Соглашения, каждая пошлина или сбор снижается до 20% от основной пошлины; - через двенадцать лет после вступления в силу настоящего Соглашения, упомянутые пошлины отменяются. 5. В отношении товаров, перечисленных в [Приложении IV](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101307), договоренности по применению к этим видам товаров будут пересмотрены Советом ассоциации через четыре года после вступления в силу Соглашения. На момент такого пересмотра, Совет ассоциации устанавливает график снижения тарифов по товарам, перечисленным в Приложении IV. 6. В случае серьезных затруднений в торговле товарами, соответствующие графики, предусмотренные [параграфами 2](https://bukva.ai/docs/soglashenie-1-15/statya-11#p100073), [3](https://bukva.ai/docs/soglashenie-1-15/statya-11#p100079) и [4](https://bukva.ai/docs/soglashenie-1-15/statya-11#p100084) могут быть пересмотрены Комитетом ассоциации по общему согласию и при понимании того, что пересмотр сроков не может выходить за рамки отведенного для соответствующих видов товаров максимума в 12 лет. Если Комитет Ассоциации не принимает решение по пересмотру графика в течение тридцати дней, Иордания может временно приостановить выполнение графика на период до одного года. 7. Для каждого вида товаров основной пошлиной, постепенное снижение которой предусмотрено в [параграфах 2](https://bukva.ai/docs/soglashenie-1-15/statya-11#p100073), [3](https://bukva.ai/docs/soglashenie-1-15/statya-11#p100079) и [4](https://bukva.ai/docs/soglashenie-1-15/statya-11#p100084) является та, что применялась vis-a-vis Сообществом на 1 января 1996 г. 8. Если после 1 января 1996 г. любое снижение тарифов применяется на основе erga omnes, то снижаемая пошлина заменяет пошлины, упомянутые в параграфе 7 с момента, когда такое снижение стало происходить. 9. Иордания сообщает о своих основных пошлинах Сообществу. ## Статья 12 ##### Статья 12 Положения относительно отмены таможенных пошлин на импорт применяются также к таможенным пошлинам фискального характера. ## Статья 13 ##### Статья 13 1. Исключительные меры в форме повышения таможенных пошлин, отклоняющиеся от положений [статьи 11](https://bukva.ai/docs/soglashenie-1-15/statya-11#p100071) могут вводиться Иорданией на ограниченный срок. Такие меры могут касаться только новых отраслей промышленности или секторов находящихся на реконструкции или испытывающих серьезные затруднения, в частности, если эти затруднения приводят к серьезным социальным проблемам. Таможенные пошлины на импорт, применяемые Иорданией к товарам, произведенным в Сообществе, введенные упомянутыми мерами не могут превышать 25% ad valorem и составлять элемент преференции для товаров, произведенных в Сообществе. Общая стоимость импортируемой продукции, которая подвергается таким мерам, не может превышать 20% всего импорта из Сообщества промышленных товаров, в соответствии со статистическими данными за последний год. Такие меры применяются в течение периода не превышающего пять лет, если более долгий срок не был разрешен Советом ассоциации. Эти меры прекращают применяться, как максимум с истечением переходного периода в двенадцать лет. Ни одна из таких мер не может вводиться в отношении товаров, по которым более трех лет не существует пошлин, количественных ограничений или сборов и мер, равнозначных им. Иордания информирует Комитет ассоциации о любых исключительных мерах, влечет за собой, равно как и по запросу Сообщества, проведение консультаций по таким мерам и ситуации в секторах, в которых они применяются до их применения. При принятии таких мер, Иордания предоставляет Комитету ассоциации график отмены таможенных пошлин, предусмотренных настоящей статьей. Этот график предусматривает разбивку на фазы реализации положений о пошлинах, начиная как минимум с двух лет после их введения по равной ежегодной ставке. Комитет ассоциации может принять решение об изменении графика. 2. В случае отступления от четвертого подпараграфа [параграфа 1](https://bukva.ai/docs/soglashenie-1-15/statya-13#p100102), Комитет ассоциации может на исключительной основе и при учете сложностей, связанных с развитием новой отрасли промышленности, разрешить Иордании сохранять меры, предпринятые в соответствии с параграфом 1 на период, не превышающий трех лет по истечении двенадцатилетнего периода. **СЕЛЬСКОХОЗЯЙСТВЕННЫЕ ТОВАРЫ И РЫБНАЯ ПРОДУКЦИЯ** ## Статья 14 ## Глава II ##### Статья 14 Положения настоящей главы применяются к продукции, произведенной в Иордании и в Сообществе и перечисленной в приложении II к [Договору](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-1) об учреждении Европейского сообщества. ## Статья 15 ##### Статья 15 Сообщество и Иордания постепенно стремятся к масштабной либерализации своей торговли сельскохозяйственными товарами. ## Статья 16 ##### Статья 16 1. Сельскохозяйственные товары, произведенные в Иордании и перечисленные в [Протоколе](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101356) 1 об импорте в Сообщество, пользуются преимуществами, предусмотренными в этом Протоколе. 2. Сельскохозяйственные товары, произведенные в Сообществе и перечисленные в [Протоколе](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101410) 2 об импорте в Иорданию, пользуются преимуществами, предусмотренными в этом Протоколе. ## Статья 17 ##### Статья 17 1. С 1 января 2002 г. Сообщество и Иордания исследуют ситуацию в целях определения мер по либерализации, которые нужно провести Сообществу и Иордании для достижения цели, предусмотренной [статьей 15](https://bukva.ai/docs/soglashenie-1-15/statya-15#p100113). 2. Без ущерба для положений предыдущего параграфа и принимая во внимание особенности торговли сельскохозяйственной продукцией между Сторонами, и ее важности, Сообщество и Иордания исследуют в рамках Совета ассоциации, от товара к товару, на обязательной и взаимной основе, возможности предоставления по каждому уступок в будущем. **ОБЩИЕ ПОЛОЖЕНИЯ** ## Статья 18 ## Глава III ##### Статья 18 1. Новые количественные ограничения на импорт, а также меры, имеющие равнозначный эффект не будут вводиться между Сообществом и Иорданией. 2. Количественные ограничения на импорт, а также меры, имеющие равнозначный эффект отменяются между Сообществом и Иорданией с момента вступления в силу настоящего Соглашения. 3. Сообщество и Иордания не применяют в отношении экспорта ни таможенных пошлин или равнозначных сборов, ни количественных ограничений или мер, имеющих эквивалентный эффект. ## Статья 19 ##### Статья 19 1. В случае, если будут введены специальные правила в рамках осуществления сельскохозяйственной политики, или любые изменения текущих правил, или в случае, если любые изменения или расширения применения положений о сельскохозяйственной политике имеют место, Сообщество или Иордания могут частично изменить договоренности, вытекающие из Соглашения в отношении товаров, по которым такие изменения были проведены. 2. Стороны осуществляют такие изменения путем информирования Совета ассоциации об этом. По запросу другой Стороны, Совет ассоциации уделяет внимание интересам этой Стороны. 3. Если Сообщество или Иордания при применении [параграфа 1](https://bukva.ai/docs/soglashenie-1-15/statya-19#p100128) изменяют договоренности, предусмотренные настоящим Соглашением в отношении сельскохозяйственных товаров, они должны согласовывать преимущества по импорту, предоставляемые другой Стороне в соответствии с настоящим Соглашением. 4. Применение настоящей статьи может являться предметом консультаций в Совете ассоциации. ## Статья 20 ##### Статья 20 1. Товары, произведенные в Иордании, при импорте в Сообщество не могут пользоваться режимом более благоприятным, чем предоставляется государствами-членами в торговле между собой. 2. Применение положений настоящего Соглашения не затрагивает положений Регламента Совета (ЕЭС) N 1911/91 от 26 июня 1991 г. о применении положений права Сообщества к Канарским островам. ## Статья 21 ##### Статья 21 1. Стороны воздержатся от любых мер или практики внутреннего фискального характера, которые прямо или косвенно подвергают дискриминации товары одной Стороны по сравнению с произведенными на территории другой Стороны. 2. Товары, экспортируемые на территорию одной из двух Сторон, не могут пользоваться льготами по возмещению внутренних налогов в отношении прямого или косвенного обложения. ## Статья 22 ##### Статья 22 1. Настоящее Соглашение не исключает сохранение или учреждение таможенных союзов, зон свободной торговли или договоренностей о приграничной торговле, за исключением тех, которые затрагивают торговые договоренности по настоящему Соглашению. 2. Консультации между Сторонами имеют место в рамках Комитета ассоциации относительно таких таможенных союзов и зон свободной торговли, а также, если это требуется, по иному важному вопросу, относящемуся к их торговым политикам с третьими странами. В частности в случае присоединения третьей страны к Сообществу, такие консультации имеют место для обеспечения взаимных интересов Сообщества и Иордании. ## Статья 23 ##### Статья 23 Если одна из Сторон обнаружит, что в торговле с другой Стороной имеет место демпинг в значении [статьи VI](https://bukva.ai/docs/generalnoe-soglashenie-po-tarifam-i-torgovle#p100071) Генерального соглашения по тарифам и торговле, она может принять соответствующие меры против такой практики в соответствии с [Соглашением](https://bukva.ai/docs/soglashenie-po-primeneniyu-stati-vi-generalnogo/statya-1) относительно применения статьи VI Генерального соглашения по тарифам и торговле, национальным законодательством и положениями и процедурами, предусмотренными в [статье 26](https://bukva.ai/docs/soglashenie-1-15/statya-26#p100154). ## Статья 24 ##### Статья 24 Если любой товар импортируется в таких возросших количествах и на таких условиях, которые наносят или угрожают нанести: - существенный ущерб национальным производителям аналогичных или непосредственно конкурирующих товаров на территории одной из Договаривающихся Сторон, или - серьезные нарушения в любом из секторов экономики или затруднениям, которые могут привести к серьезному ухудшению экономической ситуации в регионе, Соответствующая Сторона может принять соответствующие меры в соответствии с процедурами и условиями, установленными в [статье 26](https://bukva.ai/docs/soglashenie-1-15/statya-26#p100154). ## Статья 25 ##### Статья 25 Если в соответствии с положениями [статьи 18 (3)](https://bukva.ai/docs/soglashenie-1-15/statya-18#p100126) имеет место: i) реэкспорт в третью страну минуя ограничения экспортирующей Стороны для соответствующего товара, количественные экспортные ограничения, экспортные пошлины и меры, имеющие эквивалентный эффект; или ii) серьезный дефицит, либо его угроза, товара, имеющего важное значение для экспортирующей Стороны, и если перечисленные выше ситуации приводят или могут привести к серьезным затруднениям для экспортирующей Стороны, эта Сторона может предпринять необходимые меры в соответствии с условиями и процедурами, предусмотренными в статье 26. Такие меры должны быть недискриминационными и должны быть отменены, когда условия перестанут оправдывать их сохранение в силе. ## Статья 26 ##### Статья 26 1. В случае, если Сообщество или Иордания столкнутся с ситуацией, когда импорт товаров создаст затруднения, упомянутые в [статье 24](https://bukva.ai/docs/soglashenie-1-15/statya-24#p100143), в соответствии с административными процедурами, имеющимися для этих целей, соответствующая Сторона обеспечивает скорейшее направление информации о нарушениях потока товаров другой Стороне. 2. В случаях, предусмотренных [статьями 23](https://bukva.ai/docs/soglashenie-1-15/statya-23#p100141), [24](https://bukva.ai/docs/soglashenie-1-15/statya-24#p100143) и [25](https://bukva.ai/docs/soglashenie-1-15/statya-25#p100148), перед тем, как принимать любые меры, предусмотренные в них или, в случаях, когда применяется [параграф 3 "d"](https://bukva.ai/docs/soglashenie-1-15/statya-26#p100165), как можно скорее после принятия мер, Сообщество или Иордания предоставляет в Комитет ассоциации всю необходимую информацию с целью нахождения решения, приемлемого для обеих Сторон. При выборе мер в соответствии с настоящей статьей Стороны отдают предпочтение тем из них, которые наносят наименьший ущерб достижению целей настоящего Соглашения. О защитных мерах заинтересованной Стороной незамедлительно сообщается Комитету ассоциации, они являются предметом периодических консультаций в рамках этого органа, в частности по вопросам определения сроков их отмены, как только обстоятельства позволят сделать это. 3. Для реализации [параграфа 2](https://bukva.ai/docs/soglashenie-1-15/statya-26#p100156), применяются следующие положения: a) В отношении [статьи 23](https://bukva.ai/docs/soglashenie-1-15/statya-23#p100141), Комитет ассоциации информируется о случаях демпинга незамедлительно с момента начала расследования органами импортирующей Стороны. Если демпинг в значении [статьи VI](https://bukva.ai/docs/generalnoe-soglashenie-po-tarifam-i-torgovle#p100071) ГАТТ не был предотвращен или адекватное решение не было достигнуто в течение 30 дней с даты обращения в Комитет ассоциации, импортирующая Сторона может принимать соответствующие меры. b) В отношении [статьи 24](https://bukva.ai/docs/soglashenie-1-15/statya-24#p100143), трудности, возникшие в результате ситуации, упомянутой в ней, исследуются Комитетом ассоциации, который может принять любое решение, необходимое для устранения таких трудностей. Если Комитет ассоциации или экспортирующая Сторона не принимают решение, необходимое для устранения таких трудностей в течение 30 дней с даты обращения, импортирующая Сторона может принять собственные меры по решению проблемы. Такие меры не должны превышать рамки, необходимые для устранения возникших затруднений. c) В отношении [статьи 25](https://bukva.ai/docs/soglashenie-1-15/statya-25#p100148), трудности, возникшие в результате ситуации, упомянутой в этой статье, исследуются Комитетом ассоциации. Комитет ассоциации может принять любое решение, необходимое для устранения таких трудностей. Если он не принимает решение в течение 30 дней с даты обращения к нему, экспортирующая Сторона может принимать соответствующие меры по экспорту соответствующей продукции. d) В критических ситуациях, требующих немедленных действий до информирования и исследования, как и в случае, когда это невозможно, Сообщество и Иордания могут в ситуациях, перечисленных в [статьях 23](https://bukva.ai/docs/soglashenie-1-15/statya-23#p100141), [24](https://bukva.ai/docs/soglashenie-1-15/statya-24#p100143) и [25](https://bukva.ai/docs/soglashenie-1-15/statya-25#p100148), применять временные меры предосторожности, строго необходимые в сложившейся ситуации, о чем немедленно информирует другую Сторону. ## Статья 27 ##### Статья 27 Настоящее Соглашение не исключает запретов или ограничений импорта, экспорта и транзита товаров, оправданных с точки зрения общественной морали, обеспечения правопорядка или общественной безопасности; защиты здоровья и жизни людей, животных или растений; защиты природных ресурсов; защиты национальных художественных, исторических или археологических ценностей или охраны интеллектуальной собственности или применения правил, касающихся золота или серебра. Такие запреты или ограничения не должны, однако, являться средством намеренной дискриминации или скрытого ограничения торговли между Сторонами. ## Статья 28 ##### Статья 28 Протокол 4 определяет концепцию "происхождения товаров", применимую для целей настоящего раздела и методы административного сотрудничества, относящегося к ней. ## Статья 29 ##### Статья 29 Комбинированная номенклатура товаров применяется к классификации торговли товарами между двумя Сторонами. **ПРАВО НА УЧРЕЖДЕНИЕ** ## Статья 30 ### РАЗДЕЛ III. ПРАВО НА УЧРЕЖДЕНИЕ И ОКАЗАНИЕ УСЛУГ ## Глава I ##### Статья 30 1. a) Сообщество и государства-члены предоставляют Иордании режим не менее благоприятный, чем режим, предоставляемый любой третьей стране, в отношении условий, касающихся учреждения компаний на своих территориях. b) За исключением изъятий, перечисленных в [Приложении V](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101312), Сообщество и его государства-члены предоставляют дочерним компаниям иорданских компаний в Сообществе в отношении их деятельности режим не менее благоприятный, чем режим, который предоставляется другим компаниям Сообщества. c) Сообщество и государства-члены предоставляют филиалам иорданских компаний в отношении их деятельности режим не менее благоприятный, чем тот, который предоставляется филиалам компаний любой третьей страны или режим, предоставляемый собственным компаниям, в зависимости от того, какой из них лучше. 2. a) За исключением изъятий, перечисленных в [Приложении VI](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101330), Иордания предоставляет Сообществу, в отношении условий, касающихся учреждения компаний на своей территории при соблюдении своего законодательства и иных нормативных актов, режим не менее благоприятный, чем режим, предоставляемый любой третьей стране, или режим, предоставляемый собственным компаниям, в зависимости от того, какой из них лучше. b) Иордания предоставляет, при соблюдении своего законодательства и иных нормативных актов, дочерним компаниям и филиалам компаний Сообщества, учрежденным в Иордании, в отношении их деятельности режим не менее благоприятный, чем режим, который предоставляется другим иорданским компаниям, или режим, предоставляемый иорданским компаниям, являющимся дочерними компаниями компаний любой третьей страны или их филиалами соответственно, в зависимости от того, какой из них лучше. 3. Положения [пунктов 1 "b"](https://bukva.ai/docs/soglashenie-1-15/statya-30#p100177), [1 "c"](https://bukva.ai/docs/soglashenie-1-15/statya-30#p100178) и [2 "b"](https://bukva.ai/docs/soglashenie-1-15/statya-30#p100180) не могут быть использованы в обход законодательства и иных нормативных актов Стороны, применяемых в отношении доступа к отдельным секторам или видам деятельности дочерних компаний другой Стороны, учрежденных на территории первой Стороны. Режим, оговоренный в пунктах 1 "b", 1 "c" и 2 "b", распространяется на компании, учрежденные в Иордании и соответственно в Сообществе на дату вступления в силу настоящего Соглашения, а на компании, учрежденные после этой даты, - с момента их учреждения. ## Статья 31 ##### Статья 31 1. Положения [статьи 30](https://bukva.ai/docs/soglashenie-1-15/statya-30#p100175) настоящего Соглашения не применяется в отношении воздушного транспорта, внутреннего водного транспорта и морского транспорта. 2. Однако в отношении видов деятельности, указанных и осуществляемых судоходными агентствами по предоставлению международных морских транспортных услуг, охватывающих смешанные операции с использованием морского плеча, каждая Сторона разрешает, в соответствии с законодательством и правилами, применяемыми в каждой из Сторон, компаниям другой Стороны их коммерческое присутствие на своей территории в форме дочерних компаний или филиалов на условиях учреждения и деятельности, не менее благоприятных, чем те, которые предоставляются своим собственным компаниям или дочерним компаниям или филиалам компаний третьих стран, в зависимости от того, какие из них лучше. Такая деятельность включает, но не ограничивается: a) маркетинг и продажи услуг морского транспорта и связанных с этим услуг через прямые контакты с потребителями, от котировок до выставления счетов; b) приобретение и перепродажу по своему собственному усмотрению или по поручению его потребителей каких-либо транспортных и связанных с ними услуг, включая транспортные услуги, оказываемые любым внутренним видом транспорта, необходимым для оказания услуги, связанной со смешанными перевозками; c) подготовку документации, касающейся транспортных документов, таможенных документов или других документов, имеющих отношение к происхождению и характеру транспортируемых товаров; d) предоставление деловой информации любыми средствами, включая компьютеризированные информационные системы и электронный обмен данными (при условии соблюдения любых недискриминационных ограничений, касающихся телекоммуникаций); e) заключение любой деловой договоренности, в том числе об участии в долях компаний и привлечении персонала (или иностранного персонала в соответствии с положениями настоящего Соглашения) с другими судоходными агентствами; f) действие от имени компаний, в том числе по организации захода судов или принятию грузов по просьбе. ## Статья 32 ##### Статья 32 Для целей настоящего Соглашения: a) "Иорданская компания" или соответственно "компания Сообществ" означает компанию, созданную в соответствии с законодательством Иордании или соответственно государства-члена и имеющую свою зарегистрированную контору или центральную администрацию, или основное место хозяйственной деятельности на территории Иордании или соответственно Сообщества. Однако, если компания, созданная в соответствии с законами Иордании или соответственно государства-члена, имеет лишь свою зарегистрированную контору на территории Иордании или соответственно Сообщества, эта компания считается иорданской компанией или соответственно компанией Сообщества, если ее деятельность реально и продолжительно связана с экономикой Иордании или соответственно одного из государств-членов; b) "Дочерняя компания" компании означает компанию, которая контролируется этой компанией; c) "Филиал" компании означает обособленное подразделение, не являющееся юридическим лицом, которое обладает признаками постоянства, как, например, ответвление материнской компании, имеет управление и материальное оснащение для осуществления деловых отношений с третьими сторонами таким образом, что последние, зная, что в случае необходимости у них будет иметься юридическая связь с материнской компанией, головной офис которой находится за границей, не должны будут иметь дело непосредственно с этой материнской компанией, а смогут вести дела в этом подразделении, являющемся ответвлением материнской компании; d) "Учреждение" означает право иорданских компаний или компаний Сообщества, как они определены в [пункте "а" настоящей статьи](https://bukva.ai/docs/soglashenie-1-15/statya-32#p100194), приступать к экономической деятельности путем создания дочерних компаний и филиалов в Сообществе или соответственно в Иордании. e) "Деятельность" означает осуществление экономической деятельности; f) "Экономическая деятельность" означает деятельность промышленного, коммерческого или профессионального характера; g) "Гражданин государства-члена или Иордании" означает физическое лицо, которое является подданным Иордании или соответственно одного из государств-членов; h) В отношении международного морского транспорта судоходные компании, учрежденные за пределами Иордании или Сообщества и контролируемые гражданами Иордании или соответственно любого государства-члена, также пользуются положениями, предусмотренными настоящей главой и [главой III](https://bukva.ai/docs/soglashenie-1-15/statya-40#p100237), если их суда зарегистрированы в Иордании или в государстве-члене согласно их соответствующему законодательству. ## Статья 33 ##### Статья 33 1. Стороны используют все имеющиеся у них возможности с тем, чтобы избежать принятия мер или действий, которые сделали бы условия для учреждения и деятельности компаний друг друга более ограничительными по сравнению с ситуацией, существующей на день, предшествующий дню подписания Соглашения. 2. Положения настоящей статьи не наносят ущерба положениям [статьи 44](https://bukva.ai/docs/soglashenie-1-15/statya-44#p100250). Ситуации, подпадающие под действие этой статьи 44, регулируются только ее положениями, исключая любые другие. ## Статья 34 ##### Статья 34 1. Иорданская компания или компания Сообщества, осуществляющая учреждение на территории Сообщества или соответственно Иордании, правомочна, при соблюдении действующего законодательства страны учреждения, нанимать сама или через одну из своих дочерних компаний, филиалов или совместных предприятий для работы на территории Сообщества или соответственно Иордании, работников, являющихся гражданами Иордании или соответственно государств-членов, при условии, что такие работники являются ключевым персоналом, как это понятие определяется в пункте 2 настоящей статьи, а также при условии, что они наняты исключительно такими компаниями, дочерними компаниями, филиалами или совместными предприятиями. Разрешения на проживание и работу таких работников не должны превышать периода найма. 2. Ключевым персоналом упомянутых выше компаний, здесь и далее называемых "организации", являются "лица, работающие в порядке внутрифирменного перевода", как это понятие определяется в [пункте 2 "c" настоящей статьи](https://bukva.ai/docs/soglashenie-1-15/statya-34#p100214), указанных ниже категорий, при условии, что эта организация является юридическим лицом, а лица, о которых идет речь, были наняты ею или являются ее партнерами (кроме владельцев контрольного пакета акций) в течение как минимум одного года до момента такого перевода: a) лица, занимающие старшие должности в организации, которые прежде всего осуществляют управление учреждением (филиалом, дочерней компанией или совместным предприятием), находящиеся под общим контролем или получающие указания главным образом от совета директоров или акционеров или другого эквивалентного органа, включая: - руководителей учреждения, отдела или сектора учреждения; - лиц, осуществляющих руководство и контроль за деятельностью других руководителей, работников профессионального или управленческого звена; - лиц, имеющих полномочия лично осуществлять прием на работу и увольнять или давать рекомендации по вопросам приема на работу, увольнения или по другим кадровым вопросам; b) лица, работающие в организации и обладающие незаурядными знаниями, имеющими существенное значение в отношении обслуживания учреждения, исследовательского оборудования, техники или управления. Оценка этих знаний может отражать, наряду со знаниями специального характера для данного учреждения, высокий уровень квалификации, относящийся к типу предпринимательской деятельности, требующему специальных технических знаний, включая обладание профессией, работа по которой обусловлена специальными требованиями; c) "лицо, работающее в порядке внутрифирменного перевода", определяется как физическое лицо, работающее в организации на территории одной из Сторон и временно переводимое в рамках осуществления экономической деятельности на территории другой Стороны; эта организация должна иметь основное место деятельности на территории одной из Сторон, а перевод должен осуществляться в учреждение этой организации, действительно осуществляющее аналогичную экономическую деятельность на территории другой Стороны. 3. Разрешается въезд или временное пребывание на территории Сообщества или Иордании гражданам Сообщества или Иордании соответственно, если они являются представителями компаний, занимающими в компании старшие должности, определенные выше в [параграфе 2 "а"](https://bukva.ai/docs/soglashenie-1-15/statya-34#p100209), и ответственны за создание дочерней компании или филиала иорданской компании в Сообществе, либо дочерней компании или филиала компании Сообщества в Иордании соответственно, а также: - являются представителями, не задействованными непосредственно в оказании услуг или торговле, и - компания не имеет иных представителей, офисов, филиалов и дочерних компаний в соответствующем государстве-члене Сообщества или в Иордании соответственно. ## Статья 35 ##### Статья 35 В целях облегчения возможностей гражданам Сообщества и гражданам Иордании приступать к профессиональной деятельности в Иордании и Сообществе соответственно, Совет ассоциации исследует, какие шаги необходимо предпринять для взаимного признания квалификации. ## Статья 36 ##### Статья 36 Положения [статьи 30](https://bukva.ai/docs/soglashenie-1-15/statya-30#p100175) не исключают применения Стороной специальных правил относительно учреждения и деятельности на своей территории филиалов и представительств компаний другой Стороны, которые не созданы на территории первой Стороны, если такие правила оправданы юридическими и техническими различиями между упомянутыми филиалами и представительствами по сравнению с филиалами и представительствами, созданными на ее территории, либо, в отношении финансовых услуг, по причинам, продиктованным благоразумием. **ТРАНСГРАНИЧНОЕ ПРЕДОСТАВЛЕНИЕ УСЛУГ** ## Статья 37 ## Глава II ##### Статья 37 1. Стороны предпримут необходимые шаги к поступательной либерализации в сфере оказания услуг украинскими компаниями и компаниями Сообщества, учрежденными в иной Стороне, нежели из которой происходит лицо, которому услуги предназначаются, принимая во внимание развитие сектора услуг Сторон. 2. Совет ассоциации дает рекомендации по применению параграфа 1. ## Статья 38 ##### Статья 38 С целью обеспечения скоординированного развития транспорта между Сторонами, отвечающего их коммерческим потребностям, Стороны могут, после вступления в силу настоящего Соглашения, заключать специальные соглашения об условиях взаимного доступа на рынки и предоставления услуг в транспортном секторе в той степени, в какой эти условия еще не охвачены настоящим Соглашением. ## Статья 39 ##### Статья 39 1. В отношении морского транспорта Стороны обязуются эффективно применять принцип беспрепятственного доступа к международному рынку и транспортным перевозкам на коммерческой основе. a) Вышеуказанное положение не наносит ущерба правам и обязательствам, вытекающим из [Конвенции](https://bukva.ai/docs/konventsiya-o-kodekse-povedeniya-lineynyh/statya-1) Организации Объединенных Наций о Кодексе поведения линейных конференций, как он применяется к Сторонам настоящего Соглашения. Линейные операторы, не являющиеся участниками конференции, имеют право конкурировать с конференцией при условии, что они придерживаются принципа честной конкуренции на коммерческой основе. b) Стороны подтверждают свою приверженность принципу свободной конкурентной среды как одному из основных условий торговли насыпными и наливными грузами. 2. Руководствуясь принципами [пункта 1](https://bukva.ai/docs/soglashenie-1-15/statya-39#p100230), Стороны: a) не включают договоренности о делении перевозок грузов в будущие двусторонние соглашения с третьими странами, касающиеся перевозок насыпных и наливных грузов и линейных перевозок. Однако это не исключает возможности подобных договоренностей относительно линейных грузов в тех исключительных обстоятельствах, когда линейные судоходные компании той или иной Стороны настоящего Соглашения иначе не имели бы реальной возможности осуществлять перевозки в или из соответствующих третьих стран; b) с момента вступления в силу настоящего Соглашения отменяются все односторонние меры и устраняются административные, технические и другие препятствия, которые могут представлять собой скрытые ограничения или иметь дискриминационное воздействие на свободное предоставление услуг в области международных морских перевозок. Каждая Сторона предоставляет для судов, используемых для транспортировки товаров, пассажиров или тех и других и плавающих под флагом другой Стороны, inter alia режим не менее благоприятный, чем режим, предоставляемый Стороной своим судам, в отношении доступа к портам, открытым для иностранных судов, использования инфраструктуры и связанных с морскими перевозками вспомогательных услуг, предоставляемых этими портами, так же, как и в отношении соответствующих сборов и платежей, таможенного обслуживания, предоставления причалов и возможностей погрузки и разгрузки. **ОБЩИЕ ПОЛОЖЕНИЯ** ## Статья 40 ## Глава III ##### Статья 40 1. Стороны предпринимают усилия по согласованию развития положений настоящего раздела с целью учреждения "Соглашения об экономической интеграции", как оно определено в [статье V](https://bukva.ai/docs/generalnoe-soglashenie-po-torgovle-uslugami#p101248) Генерального соглашения по торговле услугами (ГАТС). 2. Задача, поставленная в параграфе 1, исследуется Советом ассоциации не позднее, чем через пять лет после вступления настоящего Соглашения в силу. 3. Совет ассоциации при проведении исследования учитывает прогресс в области сближения законодательства Сторон по соответствующим вопросам. ## Статья 41 ##### Статья 41 1. Положения настоящего раздела применяются с учетом ограничений, оправданных по причинам общественного порядка, общественной безопасности или общественного здоровья. 2. Они не применяются к деятельности, которая на территории любой Стороны связана, даже время от времени, с исполнением официальных полномочий. ## Статья 42 ##### Статья 42 Для целей настоящего раздела ничто в Соглашении не препятствует Сторонам применять их законы и иные нормативные акты, касающиеся въезда, пребывания, работы, условий труда и учреждения физических лиц и поставок услуг, при условии, что при этом они не применяют их таким способом, который аннулирует или ограничивает преимущества, получаемые любой Стороной в силу отдельного положения настоящего Соглашения. Вышеуказанное положение не наносит ущерба применению [статьи 41](https://bukva.ai/docs/soglashenie-1-15/statya-41#p100243). ## Статья 43 ##### Статья 43 Компании, которые контролируются и находятся в полном совместном владении иорданских компаний и компаний Сообщества, также пользуются преимуществами настоящего раздела. ## Статья 44 ##### Статья 44 В отношении секторов или мер, охватываемых Генеральным [соглашением](https://bukva.ai/docs/generalnoe-soglashenie-po-torgovle-uslugami) по торговле услугами (ГАТС), режим, предоставляемый любой из Сторон другой Стороне в соответствии с настоящим Соглашением, не позднее чем за месяц до даты вступления в силу соответствующих обязательств ГАТС в любом случае не будет более благоприятным, чем тот, который предоставляется такой первой Стороной в соответствии с положениями ГАТС, и это в отношении каждого сектора услуг, подсектора и способа предоставления услуг. ## Статья 45 ##### Статья 45 Для целей настоящего раздела не принимается во внимание режим, предоставляемый Иорданией или Сообществом и его государствами-членами в соответствии с обязательствами по Соглашениям об экономической интеграции в соответствии с принципами [статьи V](https://bukva.ai/docs/generalnoe-soglashenie-po-torgovle-uslugami#p101248) ГАТС. ## Статья 46 ##### Статья 46 1. Без ущерба для других положений, настоящее Соглашение не затрагивает права Сторон принимать меры, необходимые в ходе осуществления Стороной денежной политики, или по причинам, продиктованным благоразумием, включая защиту инвесторов, вкладчиков, держателей страховых полисов или лиц, которые являются траст-агентами поставщика финансовых услуг, или обеспечение целостности и стабильности финансовой системы. Такие меры не используются в качестве средств с целью избежать выполнение Сторонами своих обязательств по настоящему Соглашению. 2. Ничто в Соглашении не создает обязанности для Сторон раскрывать информацию относительно дел и отчетов конкретных потребителей или любую иную конфиденциальную, либо личную информацию, находящуюся у государственных органов. ## Статья 47 ##### Статья 47 Положения настоящего Соглашения не наносят ущерба применению каждой Стороной любой меры, необходимой для того, чтобы предотвратить обход, с использованием положений настоящего Соглашения, осуществляемых ею мер в отношении доступа третьей страны на ее рынок. **ДВИЖЕНИЕ КАПИТАЛОВ И ТЕКУЩИЕ ПЛАТЕЖИ** ## Статья 48 ### РАЗДЕЛ IV. ДВИЖЕНИЕ КАПИТАЛОВ, ПЛАТЕЖИ, КОНКУРЕНЦИЯ И ДРУГИЕ ЭКОНОМИЧЕСКИЕ ПОЛОЖЕНИЯ ## Глава I ##### Статья 48 Не затрагивая положений [статей 51](https://bukva.ai/docs/soglashenie-1-15/statya-51#p100271) и [52](https://bukva.ai/docs/soglashenie-1-15/statya-52#p100273), текущие платежи, затрагивающие движение товаров, лиц, услуг и капиталов в рамках настоящего Соглашения свободны от ограничений. ## Статья 49 ##### Статья 49 1. В рамках действия положений настоящего Соглашения, не затрагивая положений [статей 50](https://bukva.ai/docs/soglashenie-1-15/statya-50#p100268) и [51](https://bukva.ai/docs/soglashenie-1-15/statya-51#p100271) и без ущерба [Приложению VI](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101330), упомянутому в [параграфе 2 "a" статьи 30](https://bukva.ai/docs/soglashenie-1-15/statya-30#p100179), отменяются все ограничения на передвижение капитала из Сообщества в Иорданию и передвижение капитала в форме прямых инвестиций из Иордании в Сообщество. 2. Инвестирование иорданского капитала в Сообщество, иное, чем в форме прямых инвестиций, регулируется соответствующим законодательством Иордании. 3. Стороны консультируются друг с другом относительно полной либерализации движения капитала, как только обстоятельства позволят это сделать. ## Статья 50 ##### Статья 50 Не затрагивая иных положений настоящего Соглашения и других международных обязательств Сообщества и Иордании, положения [статьи 49](https://bukva.ai/docs/soglashenie-1-15/statya-49#p100264) не наносят ущерба применению любых ограничений, которые существуют между ними на момент вступления в силу настоящего Соглашения, в отношении движения капиталов между ними в форме прямых инвестиций, в том числе в недвижимость, учреждение. Вместе с тем, не должно затрагиваться пересечение границы инвестициями, производимыми резидентами Сообщества или Иордании и любая извлекаемая из них прибыль. ## Статья 51 ##### Статья 51 Если, при исключительных обстоятельствах, движение капиталов между Сообществом или Иорданией причиняет, либо способно причинить, серьезные затруднения для политики обменных курсов или денежной политики в Сообществе или Иордании, Сообщество или Иордания соответственно могут в соответствии с условиями [ГАТС](https://bukva.ai/docs/generalnoe-soglashenie-po-torgovle-uslugami) и [статьями VIII](https://bukva.ai/docs/stati-soglasheniya-mezhdunarodnogo-valyutnogo-2#p100195) и [XIV](https://bukva.ai/docs/stati-soglasheniya-mezhdunarodnogo-valyutnogo-2#p100379) Статей Соглашения о Международном валютном фонде принять защитные меры в отношении движения капитала между Сообществом и Иорданией на период не превышающий шесть месяцев, если такие меры строго необходимы. ## Статья 52 ##### Статья 52 Если, одно или более государств-членов Сообщества или Иордания испытывают трудности с балансом платежей, Сообщество или Иордания соответственно могут в соответствии с условиями [ГАТС](https://bukva.ai/docs/generalnoe-soglashenie-po-torgovle-uslugami) и [статьями VIII](https://bukva.ai/docs/stati-soglasheniya-mezhdunarodnogo-valyutnogo-2#p100195) и [XIV](https://bukva.ai/docs/stati-soglasheniya-mezhdunarodnogo-valyutnogo-2#p100379) Статей Соглашения о Международном валютном фонде принять защитные меры в отношении текущих операций между Сообществом и Иорданией на период не превышающий срока восстановления ситуации с балансом платежей, если такие меры строго необходимы. Сообщество и Иордания, при необходимости, информируют друг друга о введенных мероприятиях и направляют по возможности графика отмены соответствующих мер. **КОНКУРЕНЦИЯ И ДРУГИЕ ЭКОНОМИЧЕСКИЕ ПОЛОЖЕНИЯ** ## Статья 53 ## Глава II ##### Статья 53 1. Следующее несовместимо не совместимо с функционированием настоящего Соглашения, поскольку может воздействовать на торговлю между Иорданией и Сообществом: a) все соглашения между предприятиями, решения ассоциаций между предприятиями, а также картельная практика, которые имеют своей целью или приводят к предотвращению, ограничению или нарушению конкуренции; b) злоупотребление одним или более предприятиями доминирующим положением на территории Сообщества или Иордании, либо обеих Сторон, на всем рынке или его существенной части; c) любая государственная помощь, которая влечет нарушение или создает угрозу нарушения компетенции путем поддержки отдельных предприятий или видов товаров. 2. Любая практика не совместимая с настоящей статьей рассматривается на основе критериев, вытекающих из применения положений [статей 85](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-85#p100485), [86](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-86#p100500) и [92](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-92#p100533) Договора, учреждающего Европейское экономическое сообщество, а в случае если продукция подпадает под компетенцию Европейского объединения угля и стали, то [статей 65](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo/statya-65#p100494) и [66](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo/statya-66#p100511) Договора об учреждении этого Сообщества, а также правил относительно государственной помощи, включая вторичное право. 3. Совет ассоциации в течение трех лет с момента вступления в силу настоящего Соглашения принимает необходимые правила для имплементации [параграфов 1](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100278) и [2](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100282). До принятия этих правил, применяются положения Соглашения о толковании и применении статей VI, XVI и XXIII ГАТТ в качестве правил применения положений [пункта "c" параграфа 1](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100281) и соответствующей части [параграфа 2](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100282). 4. a) Для целей применения положений пункта "c" параграфа 1, Стороны обязуются в течение первых пяти лет после вступления в силу Соглашения, рассматривать любую помощь, предоставляемую Иорданией с учетом того факта, что Иордания относится идентичным сферам, что и охватываются [статьей 92 (3) "a"](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-92#p100540) Договора, учреждающего Европейское экономическое сообщество. Совет ассоциации, учитывая экономическую ситуацию в Иордании, принимает решение о необходимости увеличения пятилетнего периода. b) Каждая Сторона обеспечивает прозрачность области государственной помощи, inter alia, путем ежегодных докладов другой Стороне об общей сумме и оказании помощи, проведенной или представленной, по запросу, включая информацию о схемах государственной помощи. По запросу одной Стороны, другая Сторона должна предоставить информацию о конкретных случаях предоставления государственной помощи. 5. В отношении товаров, упомянутых в [главе II раздела II](https://bukva.ai/docs/soglashenie-1-15/statya-14#p100109): - положения [параграфа 1 "c"](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100281) не применяются; - любая практика не совместимая с [параграфом 1 "a"](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100279) рассматривается на основе критериев, вытекающих из применения положений [статей 42](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-42#p100271) и [43](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-43#p100276) Договора, учреждающего Европейское экономическое сообщество, и, в частности, на основе Регламента N 26/62. 6. Если Иордания или Сообщество придут к выводу, что конкретная практика несовместима с положениями [параграфа 1](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100278), и: - неадекватно соотносится с применимыми правилами в соответствии с [параграфом 3](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100283), или - существует в нарушение таких правил, и если такая практика причиняет или создает угрозу причинения серьезного вреда интересам другой Стороны или материального ущерба национальной промышленности, включая сектор услуг, Сторона может предпринять необходимые меры после консультации в Комитете ассоциации или через 30 дней после запроса о таких консультациях. В случае существования практики, не совместимой с [параграфом 1 "с"](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100281) настоящей статьи, такие необходимые меры могут, если Генеральное соглашение по тарифам и торговле применимо, вводится исключительно на основе процедур и в соответствии с условиями, предусмотренными Генеральным соглашением по тарифам и торговле и иными соответствующими инструментами, оговоренными под его эгидой, если они применимы в отношениях между Сторонами. 7. Не затрагивая каких-либо положений, принятых в соответствии с [параграфом 3](https://bukva.ai/docs/soglashenie-1-15/statya-53#p100283), Стороны обмениваются информацией, принимая во внимание ограничения, проистекающие из требований профессиональной и коммерческой тайны. ## Статья 54 ##### Статья 54 Государства-члены и Иордания постепенно урегулируют любую государственную монополию коммерческого характера не позднее, чем через пять лет после вступления настоящего Соглашения в силу в целях недопущения дискриминации в отношении условий, на которых товары поставляются и продаются, существующие между частными лицами государств-членов и Иордании. Комитет ассоциации информируется о мерах, принятых к реализации данных положений. ## Статья 55 ##### Статья 55 В отношении государственных предприятий или предприятий, которым предоставлены исключительные права, начиная с пятого года после вступления в силу настоящего Соглашения, Совет ассоциации обеспечивает, что любые меры нарушающие торговлю между Сообществом и Иорданией не вводились и не сохранялись, принимая во внимание интересы Сторон. Это положение не исключает определения в законодательстве или по факту специальных задач, для выполнения которых предприятие было создано. ## Статья 56 ##### Статья 56 1. В соответствии с настоящей статьей и [Приложением VII](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101341) Стороны предоставляют и обеспечивают адекватную и эффективную защиту прав интеллектуальной, промышленной и коммерческой собственности в соответствии с самыми высокими международными стандартами, включая эффективные средства реализации этих прав. 2. Реализация настоящей статьи и Приложения VII регулярно контролируется Сторонами. Если проблемы в сфере интеллектуальной, промышленной и коммерческой собственности затронут торговые условия, то консультации будут предприняты незамедлительно, по запросу любой из Сторон, с целью достижения взаимно приемлемого решения. ## Статья 57 ##### Статья 57 Стороны стремятся снизить различие в стандартизации и оценке соответствия. В этих целях Стороны заключают, если необходимо Соглашения о взаимном признании в сфере оценки соответствия. ## Статья 58 ##### Статья 58 Стороны ставят своей задачей взаимную и последовательную либерализацию государственных закупок. Совет ассоциации предпринимает необходимые шаги для реализации этой задачи. ## Статья 59 ### РАЗДЕЛ V. ЭКОНОМИЧЕСКОЕ СОТРУДНИЧЕСТВО ### Статья 59 Задачи 1. Стороны способствуют экономическому сотрудничеству на взаимовыгодной основе в соответствии со всеобщими целями Соглашения. 2. Задачей экономического сотрудничества является поддержка усилий Иордании по достижению устойчивого экономического и социального развития. ## Статья 60 ### Статья 60 Сфера распространения 1. Сотрудничество в первую очередь и в дальнейшем фокусируется на областях, подверженных внутренним проблемам и трудностям или включенных в процесс либерализации экономики Иордании в целом, и в частности, либерализации торговли между Иорданией и Сообществом. 2. Аналогично, сотрудничество фокусируется на сферах, ведущих к тесному взаимодействию экономик Сообщества и Иордании, в частности, приводящих к росту производительности и занятости. 3. Сотрудничество направлено на укрепление интеграции между Иорданией и другими странами региона. 4. Сохранение окружающей среды и экологического баланса является центральным компонентом различных областей экономического сотрудничества. 5. Стороны могут согласовать распространения экономического сотрудничества на иные сектора, не охватываемые положениями настоящего раздела. ## Статья 61 ### Статья 61 Методы и система действий Экономическое сотрудничество использует следующие методы: a) регулярный экономический диалога между Сторонами, который охватывает все аспекты макроэкономической политики; b) регулярный обмен информацией и идеями по каждому сектору сотрудничества, включая встречи должностных лиц и экспертов; c) обмен мнениями, экспертными заключениями и обучения; d) реализация таких совместных мероприятий, как семинары и круглые столы; e) технической, административной и методологической помощи; f) поддержка совместной деятельности. ## Статья 62 ### Статья 62 Региональное сотрудничество Стороны развивают свою деятельность, имеющую региональный аспект или привлекают к этому другие страны. В частности, это затрагивает: a) внутреннюю региональную торговлю; b) экологические проблемы; c) развитие экономической инфраструктуры; d) исследования в области науки и техники; e) культурные вопросы; f) таможенное дело; ## Статья 63 ### Статья 63 Образование и профессиональное обучение Стороны сотрудничают с целью определения и внедрения наиболее эффективных средств улучшения образования и ситуации с профессиональным обучением, в частности, что касается государственных и частных предприятий, связанных с торговлей услуг, государственной службы и органов, технических учреждений, органов стандартизации и сертификации и других соответствующих организаций. В этом контексте профессиональное обучение в сфере перестройки промышленности будет удостоено отдельного внимания. Сотрудничество также содействует созданию долгосрочных связей между специальными учреждениями Сообщества и Иордании в целях наполнения и обмена информацией, опытом и техническими ресурсами. ## Статья 64 ### Статья 64 Научное и технологическое сотрудничество Целями сотрудничества являются: a) содействие созданию постоянных связей между научными сообществами Сторон, в частности посредством: - обеспечение доступа Иордании к программам Сообщества по исследованиям и технологическому развитию в соответствии с правилами Сообщества относительно участия стран, не являющихся членами Сообщества в таких программах, - участия Иордании в сетях децентрализованного сотрудничества, - поддержки взаимных усилий в области обучения и исследований; b) совершенствование исследовательского потенциала Иордании; c) стимулирование технологических инноваций, обмен новыми технологиями и "ноу-хау", в частности в целях ускорения изменений реструктуризации иорданской промышленности. ## Статья 65 ### Статья 65 Окружающая среда 1. Стороны развивают сотрудничество в целях предупреждения деградации окружающей среды, контроля загрязнения и рационального использования природных ресурсов при обеспечении устойчивого развития и поддержки региональных экологических проектов. 2. Сотрудничество касается, в частности: - опустынивания; - качества вод моря, контроля и предупреждения загрязнения моря; - водопользования; - соответствующего использования энергии; - управления отходами; - воздействия индустриального развития на окружающую среду в целом и безопасности индустриальных установок в частности; - воздействия сельского хозяйства на качество почв и вод; - экологического образования и премий; - использования имеющихся инструментов экологического менеджмента, методов экологического мониторинга и надзора, включая использование информационных систем (EIS) и оценки воздействия на окружающую среду; - засаливания. ## Статья 66 ### Статья 66 Промышленное сотрудничество Сотрудничество обеспечивает и поощряет в частности: - сотрудничество между экономическими операторами Сторон, включая сотрудничество в контексте доступа Иордании к сетям Сообщества по сближению бизнеса и децентрализации сотрудничества; - модернизацию и перестройку промышленности Иордании; - развитие среды, благоприятной для частных инициатив, нацеленных на стимулирование и диверсификацию промышленного производства; - сотрудничество между малыми и средними предприятиями Сообщества и Иордании; - диверсификацию промышленной продукции; - сплочение человеческих ресурсов; - облегчение доступа для финансовых инвестиций; - стимулирование инноваций; - совершенствование систем информационной поддержки. ## Статья 67 ### Статья 67 Поддержка и защита инвестиций Целью сотрудничества является создание благоприятного климата для потока инвестиций в Иорданию. Сотрудничество предусматривает развитие: - гармонизированных и упрощенных процедур, совместные инвестиционные проекты, в частности, объединяющие малые и средние предприятия, а также методы сбора и предоставления информации относительно инвестиционных возможностей; - правовых рамок для поддержки инвестиций главным образом путем заключения между Иорданией и государствами-членами Соглашений о защите инвестиций и об избежании двойного налогообложения; - доступа промышленных инвестиций на рынок капитала; - совместные действия Иордании и Сообщества в сфере бизнеса. ## Статья 68 ### Статья 68
Сотрудничество в области
стандартизации и оценки соответствия Стороны сотрудничают по развитию: a) использования правил Сообщества в сферах стандартизации, метрологии, контроля качества и оценки соответствия; b) переоснащения лабораторий в Иордании, одновременно содействуя, где это уместно, заключению соглашений и взаимном признании оценок соответствия; c) структур, ответственных в сфере интеллектуальной, промышленной и коммерческой собственности, а также за стандартизацию и качество. ## Статья 69 ### Статья 69 Сближение законодательства Стороны прилагают максимальные усилия по сближению их законодательства в целях облегчения имплементации настоящего Соглашения. ## Статья 70 ### Статья 70 Финансовые услуги Стороны сотрудничают в целях сближения своих правил и стандартов в различных сферах, включая следующие: a) поддержка и перестройка финансового сектора в Иордании; b) совершенствование учета, аудита, надзора и регулирования в сфере банковских, страховых и других финансовых услуг в Иордании. ## Статья 71 ### Статья 71 Сельское хозяйство Стороны фокусируют сотрудничество, в частности, по следующим вопросам: - поддержка осуществляемой ими политики по диверсификации производства; - обеспечение благоприятного для окружающей среды сельского хозяйства; - укрепление отношений между бизнесом, группами и организациями, представляющими работников в Иордании и в Сообществе на добровольной основе; - техническая помощь и обучение; - гармонизация фитосанитарных и ветеринарных стандартов; - комплексное развитие села, включая совершенствование основных услуг и развитие связанной с этим экономической деятельности; - сотрудничество между сельскими регионами, обмен опытом и ноу-хау в сфере развития села. ## Статья 72 ### Статья 72 Транспорт Целями сотрудничества являются: - перестройка и модернизация инфраструктуры дорог, железных дорог, портов и аэропортов, представляющих общий интерес, в соответствии с основными трансъевропейскими путями сообщений; - разработка и применение текущих стандартов, сопоставимых с действующими в Сообществе; - приведение оборудования в соответствие со стандартами Сообщества, в частности в сфере смешанного транспорта, соответствующего хранения и перевозки; - общего улучшения транзита по дорогам; - совершенствование управления аэропортами, авиаперевозками и железными дорогами, включая контроль со стороны национальных органов. ## Статья 73 ### Статья 73 Информационные технологии и телекоммуникации Сотрудничество фокусируется на: a) телекоммуникациях в целом; b) стандартизации, анализе соответствия и сертификации информационных технологий и телекоммуникаций; c) распространении новых информационных технологий, в частности в отношении сетей и межсетевых соединений (ISDN - интегрированная цифровая сеть услуг, EDI - база электронного обмена данными); d) стимулирование исследований и развития новых коммуникаций и информационных технологий в целях совершенствования рыночной инфраструктуры, сферы услуг и применения соответствующих информационных технологий и развития служб и технических объектов. ## Статья 74 ### Статья 74 Энергетика Приоритетами сотрудничества являются: a) развитие источников возобновляемой энергии; b) обеспечение сохранения энергии и энергоэффективности; c) применение исследований, касающихся баз данных, связанных с экономическими операторами обеих Сообщества и Иордании; d) поддержка усилий по модернизации и развитию энергетических сетей и создания связей между ними и соответствующими сетями Сообщества. Сотрудничество также концентрируется на проблемах упрощения транзита газа, нефти и электричества. ## Статья 75 ### Статья 75 Туризм Приоритетами сотрудничества в этой сфере являются: - повышение уровня знаний о туристическом секторе и повышение взаимодействия политик, воздействующих на туризм; - поддержка развития сезонного туризма; - обеспечение сотрудничества между регионами и городами соседних стран; - увеличение информации для туристов и защита их интересов; - повышение значимости культурного наследия для туризма; - обеспечение взаимодействия между туризмом и окружающей средой; - создание туризма более конкурентоспособным путем поддержки профессионализма, в частности в отношении управления отелями; - обмен информацией и планами развития туризма и туристических маркетинговых проектах, туристических экскурсиях, выставках, событиях и публикациях. ## Статья 76 ### Статья 76 Таможенное дело 1. Стороны обязуются развивать таможенное сотрудничество в целях обеспечения соблюдения положений, принятых в отношении торговли. Сотрудничество фокусируется на: a) упрощении таможенных проверок и процедур; b) использовании Единого административного документа и создании связей между транзитными системами Иордании и Сообщества. 2. Без ущерба для других форм сотрудничества, предусмотренных настоящим Соглашением, взаимная помощь по таможенным делам между административными органами Сторон осуществляется в соответствии с положениями Протокола 4. ## Статья 77 ### Статья 77 Сотрудничество в области статистики Основной целью сотрудничества в этой области является гармонизация методов в целях создания разумной основы для сбора данных по торговле, населению, миграции и всем областям в общем, охватываемым настоящим Соглашением, в которых статистические данные могут быть собраны. ## Статья 78 ### Статья 78 Отмывание денег 1. Стороны признают необходимость совместной работы и сотрудничества по предотвращению использования своих финансовых систем для "отмывания" доходов от преступной деятельности в целом, и, в частности, от преступлений, связанных с наркотическими веществами. 2. Сотрудничество в этой сфере включает административную и техническую помощь в целях введения необходимых стандартов по борьбе с отмыванием денег, схожих с тем, что приняты в Сообществе и международными структурами в этой сфере, включая ФАТФ. ## Статья 79 ### Статья 79 Борьба с употреблением и перевозкой наркотиков 1. Сотрудничество Сторон, в частности, нацелено: - на повышение эффективности и действенности политики и мероприятий, осуществляемых с целью борьбы с незаконным производством, поставкой и оборотом наркотических и психотропных веществ; - на сокращение использования наркотических веществ. 2. Стороны совместно определяют, в соответствии с их соответствующим законодательством, стратегии и методы сотрудничества по решению данных задач. Их разработка, исключая совместную разработку, является предметом консультаций и тесного сотрудничества. Соответствующие органы, действующие в государственном и частном секторах, согласно их компетенции, взаимодействующие с компетентными органами Иордании, Сообщества и государств-членов, могут стать частью этих разработок. 3. Сотрудничество принимает форму обмена информацией и, если необходимо, совместных действий в отношении: a) учреждения и распространения социальных и здравоохранительных учреждений и информационных систем, занятых лечением и реабилитацией наркозависимых лиц; b) осуществления проектов по предупреждению, информированию, обучению и эпидемиологическим исследованиям; c) введение стандартов по борьбе с незаконным производством наркотических веществ и других составляющих, а также психотропных веществ, которые соответствуют стандартам Сообщества и соответствующих международных структур, и в частности ХАТФ. **ДИАЛОГ ПО СОЦИАЛЬНЫМ ВОПРОСАМ** ## Статья 80 ### РАЗДЕЛ VI. СОТРУДНИЧЕСТВО ПО СОЦИАЛЬНЫМ ВОПРОСАМ И В СФЕРЕ КУЛЬТУРЫ ## Глава I ##### Статья 80 1. Стороны проводят регулярный диалог по любым социальным вопросам, представляющим взаимный интерес. 2. Такой диалог используется для поиска путей достижения прогресса в сфере передвижения работников, равного обращения и социальной интеграции граждан Иордании и Сообщества законно проживающих в принимающем государстве. 3. Диалог в частности охватывает все вопросы связанные с: a) условиями жизни и труда сообществ мигрантов; b) миграцией; c) нелегальной иммиграцией и условиями, касающимися возвращения лиц, нарушающих законодательство относительно права на проживание и права на учреждения в принимающем государстве; d) системами и программами по содействию равного обращения для граждан Сообщества и Иордании, взаимного уважения культуры и цивилизаций, развития толерантности и исключение дискриминации. ## Статья 81 ##### Статья 81 Диалог по социальным вопросам проводится на том же уровне и в соответствии с теми же процедурами, что предусмотрены в [разделе I](https://bukva.ai/docs/soglashenie-1-15/statya-3#p100031) настоящего Соглашения, и которые соответствуют рамкам этого диалога. **СОТРУДНИЧЕСТВО В СОЦИАЛЬНОЙ СФЕРЕ** ## Статья 82 ## Глава II ##### Статья 82 1. Стороны признают важность социального развития, которое тесным образом обуславливает экономическое развитие. Они придают особый приоритет уважению основных социальных прав. 2. С позиции консолидации сотрудничества между Сторонами в социальной сфере, проекты и программы осуществляются ими в сферах, представляющих совместный интерес. Приоритет будет отдан: a) снижению миграционного давления, в частности путем создания рабочих мест и развития профессионального обучения в сферах, из которых происходят эмигранты; b) выдворению незаконно проживающих лиц в виду их статуса в соответствии с законодательством конкретного государства; c) поддержке роли женщин в процессах экономического и социального развития путем образования и развития программ в Иордании в соответствующей области; d) поддержке и развитие программ развития планирования семьи, защиты материнства и детства в Иордании; e) совершенствованию системы социальной защиты; f) укреплению системы здравоохранения; g) повышению условий жизни в бедных и малочисленных регионах; h) имплементации и финансированию программ обмена и обучения для смешанных групп молодых людей из Иордании и Европы, проживающих в государствах-членах, с целью поддержки изучения культур и развития толерантности. ## Статья 83 ##### Статья 83 Программы сотрудничества осуществляются в координации с государствами-членами и соответствующими международными организациями. ## Статья 84 ##### Статья 84 Специальная рабочая группа учреждается Советом ассоциации к концу первого года, следующего за вступлением в силу настоящего Соглашения. Она ответственна за продолжение и регулярную имплементацию [глав I](https://bukva.ai/docs/soglashenie-1-15/statya-80#p100468) - [II](https://bukva.ai/docs/soglashenie-1-15/statya-82#p100480) на постоянной основе. **СОТРУДНИЧЕСТВО ПО ВОПРОСАМ КУЛЬТУРЫ И ИНФОРМАЦИОННОГО ОБМЕНА** ## Статья 85 ## Глава III ##### Статья 85 1. В целях развития взаимопонимания, учитывая уже осуществленные мероприятия, Стороны предпринимают меры, при уважении культур обеих Сторон, по поддержке поступательно развивающегося культурного диалога и обеспечению продолжения культурного сотрудничества между ними, без ущерба для какой-либо из сфер деятельности. 2. При разработке совместных программ и проектов сотрудничества и осуществлении совместной деятельности, Стороны закладывают специальные положения относительно молодежи, письменных и аудиовизуальных средств выражения и связей, а также защите их наследия и распространения культуры. 3. Стороны соглашаются, что программы культурного сотрудничества, уже существующие в сообществе или в одном или более государств-членов, могут быть распространены на Иорданию. 4. Стороны развивают деятельность, представляющую взаимный интерес в сфере информации и коммуникаций. ## Статья 86 ### РАЗДЕЛ VII. ФИНАНСОВОЕ СОТРУДНИЧЕСТВО #### Статья 86 С целью полного выполнения целей Соглашения, финансовое сотрудничество предусматривается для Иордании в рамках соответствующих процедур и источников. Эти процедуры принимаются путем заключения двустороннего соглашения между Сторонами и применения наиболее подходящих инструментов с момента вступления Соглашения в силу. В дополнение к сферам, охватываемым [разделами V](https://bukva.ai/docs/soglashenie-1-15/statya-59#p100308) и [VI](https://bukva.ai/docs/soglashenie-1-15/statya-80#p100467) настоящего Соглашения, сотрудничество предусматривает: - содействие реформам, нацеленным на модернизацию экономики; - обновление экономической инфраструктуры; - поддержку частных инвестиций и действий по созданию рабочих мест; - учет последствий поступательного создания зоны свободной торговли для экономики Иордании, в частности при обновлении и перестройке соответствующей отрасли промышленности; - мер, затрагиваемых реализацией социальной политики. ## Статья 87 #### Статья 87 В рамках инструментов Сообщества, предназначенных для поддержки программ структурных изменений в странах Средиземноморья, и при тесном сотрудничестве с органами власти Иордании и другими структурами, в частности международными финансовыми институтами, Сообщество исследует возможные пути поддержки структурной политики, осуществляемой Иорданией по восстановлению равновесия по всем ключевым направлениям и создания экономической среды, способствующей устойчивому росту и одновременно укрепляющей социальное сплочение. ## Статья 88 #### Статья 88 В целях обеспечения скоординированного подхода, касающегося макроэкономических и финансовых проблем, которые могут препятствовать постепенной реализации Соглашения, Стороны в тесном взаимодействии исследуют развитие торговли и финансовых отношений между Сообществом и Иорданией в качестве составной части экономического диалога, предусмотренного в [разделе V](https://bukva.ai/docs/soglashenie-1-15/statya-59#p100308). ## Статья 89 ### РАЗДЕЛ VIII. ИНСТИТУЦИОНАЛЬНЫЕ, ОБЩИЕ И ЗАКЛЮЧИТЕЛЬНЫЕ ПОЛОЖЕНИЯ #### Статья 89 Настоящим учреждается Совет ассоциации, который заседает на уровне министров раз в год, а также тогда, когда этого требуют обстоятельства, по инициативе Председателя и в соответствии с положениями, содержащимися в его правилах процедуры. Он изучает все основные вопросы, возникающие в рамках Соглашения, и любые другие двусторонние или международные вопросы, представляющие взаимный интерес. ## Статья 90 #### Статья 90 1. Совет ассоциации состоит из членов Правительства Иордании, с одной стороны, и членов Совета Европейского Союза и членов Комиссии Европейских сообществ, с другой стороны. 2. Члены Совета ассоциации могут быть представлены другими лицами в соответствии с правилами процедуры. 3. Совет ассоциации определяет свои правила процедуры. 4. Председательство в Совете ассоциации осуществляется членом Правительства Иордании и представителем Совета Европейского Союза в соответствии с правилами процедуры. ## Статья 91 #### Статья 91 Для достижения целей настоящего Соглашения, Совет ассоциации наделен полномочиями принимать решения в случаях, предусмотренных Соглашением. Принятое решение обязательно для Сторон, которые предпринимают меры для его имплементации. Совет ассоциации может также давать соответствующие рекомендации. Совет ассоциации проводит свои решения и рекомендации посредством согласования между двумя Сторонами. ## Статья 92 #### Статья 92 1. Содействие Совету ассоциации в выполнении его обязанностей по Соглашению оказывается Комитетом ассоциации. 2. Совет ассоциации может делегировать любые свои полномочия Комитету ассоциации полностью или частично. ## Статья 93 #### Статья 93 1 Комитет ассоциации состоит из представителей Правительства Иордании, с одной стороны, и представителей членов Совета Европейского Союза и представителей Комиссии Европейских сообществ, с другой стороны, обычно на уровне старших должностных лиц. 2. Комитет ассоциации определяет свои правила процедуры. 3. Председательство в Комитете ассоциации осуществляется членом Правительства Иордании и представителем Совета Европейского Союза. ## Статья 94 #### Статья 94 1. Комитет ассоциации обладает полномочиями по принятию решений по реализации Соглашения, а равно в тех сферах, по которым Совет ассоциации делегировал ему свои полномочия. 2. Комитет ассоциации вырабатывает решения на основе согласия Сторон. Такие решения обязательны для Сторон, которые принимают необходимые меры для его реализации. ## Статья 95 #### Статья 95 Совет ассоциации может принять решение о создании любой рабочей группы или органа для целей реализации Соглашения. ## Статья 96 #### Статья 96 Совет ассоциации предпринимает все необходимые меры по развитию контактов и сотрудничества между Парламентом Иордании и Европейским парламентом. ## Статья 97 #### Статья 97 1. Любая из двух Сторон может запросить Совет ассоциации о рассмотрении любого спора относительно применения и толкования настоящего Соглашения. 2. Совет ассоциации может разрешить спор посредством решения. 3. Каждая Сторона будет связана мерами, вводимыми в осуществление решения, упомянутого в параграфе 2. 4. В случае, если невозможно разрешить спор в соответствии с параграфом 2, каждая Сторона может уведомить другую о назначении арбитра; другая Сторона должна в таком случае назначить второго арбитра в течение двух месяцев. Для целей применения настоящей процедуры, Сообщество и государства-члены понимаются, как одна Сторона спора. Совет ассоциации назначает третьего арбитра. Решение арбитров принимается большинством голосов. Каждая Сторона спора должна предпринять шаги по имплементации решения арбитров. ## Статья 98 #### Статья 98 Ничто в настоящем Соглашении не препятствует принятию одной из Сторон любых мер: a) которые она считает необходимыми для предотвращения раскрытия информации, противоречащей существенным интересам ее безопасности; b) которые касаются производства или торговли вооружением, боеприпасами или товарами военного назначения или исследований, разработок или производства в оборонных целях, при условии, что такие меры не ухудшают условия конкуренции в отношении товаров, не предназначенных специально для военных целей; c) в случае серьезных внутренних нарушений, затрагивающих поддержание закона и порядка, во время войны или серьезного обострения международной напряженности, представляющего собой угрозу войны, или в целях выполнения обязательств, которые она взяла в целях поддержания мира и международной безопасности. ## Статья 99 #### Статья 99 В областях, охватываемых настоящим Соглашением, и без ущерба для его любых специальных положений: - договоренности, применяемые Иорданией в отношении Сообщества, не должны приводить к любой дискриминации между государствами-членами, их гражданами или их компаниями или фирмами; - договоренности, применяемые Сообществом в отношении Иордании, не должны приводить к любой дискриминации между гражданами Иордании или ее компаниями или фирмами. ## Статья 100 #### Статья 100 В отношении прямого налогообложения, ничто в Соглашении не затрагивает: - расширения налоговых преимуществ, предоставляемых любой из Сторон в соответствии с любыми международными соглашениями или договоренностями, которые связывают их; - принятия или применения каждой из Сторон любых мер, направленных на предупреждение избежания или уклонения от налогообложения; - права Сторон применять соответствующие положения их налогового законодательства к налогоплательщикам, которые не находятся в идентичной ситуации, в частности, в отношении места, где они считаются резидентами. ## Статья 101 #### Статья 101 1. Стороны предпринимают любые общие или специальные меры, необходимые для выполнения их обязательств по настоящему Соглашению. Они следят за тем, чтобы цели, закрепленные в Соглашении, были достигнуты. 2. Если одна из Сторон сочтет, что другая Сторона не выполнила своих обязательств по Соглашению, она может предпринять надлежащие меры. Перед этим, за исключением случаев особой срочности, она представляет Совету сотрудничества всю соответствующую информацию, необходимую для тщательного изучения ситуации с целью поиска решения, приемлемого для Сторон. При выборе таких мер предпочтение отдается тем из них, которые в наименьшей степени нарушают действие Соглашения. Совет сотрудничества незамедлительно уведомляется об этих мерах, являющихся предметом консультации в рамках Совета ассоциации, если этого требует другая Сторона. ## Статья 102 #### Статья 102 [Протоколы 1](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101356) - 4 вместе с [Приложениями I](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101198) - [VII](https://bukva.ai/docs/soglashenie-1-15/statya-107#p101341) составляют неотъемлемую часть настоящего Соглашения. Декларации и обмен письмами включаются в Заключительный акт, который также составляет неотъемлемую часть настоящего Соглашения. ## Статья 103 #### Статья 103 Для целей настоящего Соглашения термин "Стороны" означает Иорданию, с одной стороны, и Сообщество, или его государства-члены, или Сообщество и его государства-члены согласно их соответствующим полномочиям, с другой стороны. ## Статья 104 #### Статья 104 Настоящее Соглашение заключено на неопределенный срок. Любая из Сторон может направить другой Стороне письменное извещение о денонсации настоящего Соглашения. Соглашение прекращает свое действие через шесть месяцев после направления извещения. ## Статья 105 #### Статья 105 Настоящее Соглашение применяется на территории Иордании, с одной стороны, и на территориях, на которых применяются Договоры об учреждении [Европейского сообщества](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo-ees-evropeyskoe/statya-1), [Европейского объединения угля и стали](https://bukva.ai/docs/dogovor-ob-uchrezhdenii-evropeyskogo/statya-1) и на условиях, предусмотренных этими Договорами, с другой стороны. ## Статья 106 #### Статья 106 Настоящее Соглашение совершено в двух экземплярах, каждый на арабском и датском, нидерландском, английском, финском, французском, немецком, греческом, итальянском, испанском, португальском и шведском языках, причем все тексты имеют одинаковую силу, и передается на хранение Совету Европейского Союза. ## Статья 107 #### Статья 107 1. Настоящее Соглашение подлежит одобрению Сторонами в соответствии с их процедурами. Настоящее Соглашение вступает в силу в первый день второго месяца, следующего за датой, когда Договаривающиеся Стороны информируют друг друга о выполнении процедур, упомянутых в первом абзаце. 2. После вступления в силу настоящее Соглашение заменяет Соглашение между Иорданским Хашимитским Королевством и Европейским сообществом и Соглашение между Иорданским Хашимитским Королевством, с одной стороны, и Европейским объединением по углю и стали, с другой стороны, подписанные в Брюсселе 18 января 1977 года. Совершено в Брюсселе двадцать четвертого ноября тысяча девятьсот девяносто седьмого года. (Подписи) **ESTABLISHING AN ASSOCIATION BETWEEN** **THE EUROPEAN COMMUNITIES AND THEIR MEMBER STATES,** **OF THE ONE PART, AND THE HASHEMITE KINGDOM OF JORDAN,** **OF THE OTHER PART** (Brussels, 24.XI.1997) The Kingdom of Belgium, The Kingdom of Denmark, The Federal Republic of Germany, The Hellenic Republic, The Kingdom of Spain, The French Republic, Ireland, The Italian Republic, The Grand Duchy of Luxembourg, The Kingdom of the Netherlands, The Republic of Austria, The Portuguese Republic, The Republic of Finland, The Kingdom of Sweden, The United Kingdom of Great Britain and Northern Ireland, Contracting Parties to the Treaty establishing the European Community and the Treaty establishing the European Coal and Steel Community, hereinafter referred to as the "Member States", and The European Community, The European Coal and Steel Community, hereinafter referred to as "the Community", of the one part, and The Hashemite Kingdom of Jordan, hereinafter referred to as "Jordan", of the other part, Considering the importance of the existing traditional links between the Community, its Member States and Jordan, and the common values that they share, Considering that the Community, its Member States and Jordan wish to strengthen those links and to establish lasting relations based on reciprocity and partnership and to further integrate Jordan's economy into the European economy, Considering the importance which the Parties attach to the principles of the United Nations Charter, particularly the observance of human rights, democratic principles and political and economic freedoms which form the very basis of the Association, Considering the political and economic developments which have taken place in Europe and in the Middle East in the past years, Conscious of the need to associate their efforts to strengthen political stability and economic development in the region through the encouragement of regional cooperation, Desirous of establishing and developing regular political dialogue on bilateral and international issues of mutual interest, Convinced of the need to strengthen the process of social and economic modernisation that Jordan has undertaken with the objective of the full integration of its economy in the world economies and of its participation in the community of democratic countries, Considering the difference in economic and social development existing between Jordan and the Community, Desirous of establishing cooperation, supported by a regular dialogue, in economic, scientific, technological, cultural, audiovisual and social matters with a view to improving mutual knowledge and understanding, Considering the commitment of the Community and Jordan to free trade, and in particular to compliance with the rights and obligations arising out of the General Agreement on Tariffs and Trade (1994) (GATT), Convinced that the Association Agreement will create a new climate for their economic relations and in particular for the development of trade, investment and economic and technological cooperation, Have agreed as follows: 1. An Association is hereby established between the Community and its Member States, of the one part, and Jordan, of the other part. 2. The aims of this Agreement are: - to provide an appropriate framework for the political dialogue, allowing the development of close political relations between the Parties, - to establish the conditions for the progressive liberalisation of trade in goods, services and capital, - to foster the development of balanced economic and social relations between the Parties through dialogue and cooperation, - to improve living and employment conditions, and enhance productivity and financial stability, - to encourage regional cooperation with a view to the consolidation of peaceful coexistence and economic and political stability, - to promote cooperation in other areas which are of reciprocal interest. Relations between the Parties, as well as all the provisions of the Agreement itself, shall be based on respect of democratic principles and fundamental human rights as set out in the universal declaration on human rights, which guides their internal and international policy and constitutes an essential element of this Agreement. 1. A regular political dialogue shall be established between the Parties. It shall strengthen their relations, contribute to the development of a lasting partnership and increase mutual understanding and solidarity. 2. The political dialogue and cooperation will in particular: - develop better mutual understanding and an increasing convergence of positions on international issues, and in particular on those issues likely to have substantial effects on one or the other Party, - enable each Party to consider the position and interests of the other, - enhance regional security and stability, - promote common initiatives. The political dialogue shall cover all subjects of common interest, and shall aim to open the way to new forms of cooperation with a view to common goals, in particular peace, security, human rights, democracy and regional development. 1. The political dialogue shall facilitate the pursuit of joint initiatives and shall take place at regular intervals and whenever necessary, in particular: (a) at ministerial level, mainly in the framework of the Association Council; (b) at senior official level between representatives of Jordan, of the one part, and of the Presidency of the Council and of the Commission, of the other; (c) by taking full advantage of all diplomatic channels including regular briefings by officials, consultations on the occasion of international meetings and contacts between diplomatic representatives in third countries; (d) by any other means which would make a useful contribution to consolidating, developing and stepping up this dialogue. 2. There shall be a political dialogue between the European Parliament and the Jordanian Parliament.
**TITLE II. FREE MOVEMENT OF GOODS**
**BASIC PRINCIPLES**
The Community and Jordan shall gradually establish a free trade area over a transitional period lasting a maximum of 12 years starting from the date of the entry into force of this Agreement in accordance with the provisions of this Agreement and in conformity with those of the General Agreement on Tariffs and Trade (1994), hereinafter referred to as the "GATT".
Chapter 1 **INDUSTRIAL PRODUCTS**
##### Article 7 The provisions of this chapter shall apply to products originating in the Community and Jordan other than those listed in Annex II to the Treaty establishing the European Community. ##### Article 8 No new customs duties on imports, or any other charge having equivalent effect, shall be introduced on trade between the Community and Jordan. ##### Article 9 Imports into the Community of products originating in Jordan shall be allowed free of customs duties and of any other charge having equivalent effect and free of quantitative restrictions and of any other measure having equivalent effect. ##### Article 10 1. (a) The provisions of this chapter shall not preclude the retention by the Community of an agricultural component in respect of goods originating in Jordan and listed in Annex I. (b) The agricultural component may take the form of a flat-rate amount or an ad valorem duty. (c) The provisions of Chapter 2 applicable to agricultural products shall apply mutatis mutandis to the agricultural component. 2. (a) The provisions of this chapter shall not preclude the retention by Jordan of an agricultural component in respect of goods originating in the Community and listed in Annex II. (b) The agricultural components which, pursuant to subparagraph (a), Jordan may charge on imports from the Community shall not exceed 50% of the basic duty rate charged on imports from countries not benefiting from preferential trading arrangements but benefiting from most-favoured-nation treatment. (c) If Jordan proves that the equivalence of the duties applicable to the agricultural products incorporated in the goods listed in Annex II exceed the maximum rate set out in subparagraph (b) the Association Council may agree on a higher rate. (d) Jordan may enlarge the list of goods to which this agricultural component applies, provided the goods are included in Annex I. Before its adoption, this agricultural component shall be notified for examination to the Association Committee which may take any decision needed. (e) For the products listed in Annex II originating in the Community, Jordan shall apply from the entry into force of the Agreement customs duties on import and charges having equivalent effect not higher than those in force on 1 January 1996. 3. As regards the industrial element of the products listed in Annex II originating in the Community, Jordan shall progressively abolish the customs duties on imports or charges having equivalent effect according to the provisions of Article 11. 4. Where, in trade between the Community and Jordan, the charge applicable to a basic agricultural product is reduced, or where such reductions are the result of mutual concessions for processed agricultural products, the agricultural components applied in conformity with paragraphs 1 and 2 may be reduced. 5. The reduction provided for in paragraph 4, the list of goods concerned and, where applicable, the tariff quotas to which the reduction refers, shall be established by the Association Council. ##### Article 11 1. Customs duties and charges having equivalent effect applicable on import into Jordan of products originating in the Community, other than those listed in Annexes II, III and IV, shall be abolished upon the entry into force of this Agreement. 2. Pursuant to Article 10(2)(b) and (3), the total customs duties and charges having equivalent effect applicable on import into Jordan of processed agricultural products originating in the Community listed in Annex II shall be progressively abolished in accordance with the following schedule: - four years after the date of entry into force of this Agreement each duty and charge shall be reduced by 10% of the basic duty, - five years after the date of entry into force of this Agreement each duty and charge shall be reduced by 20% of the basic duty, - six years after the date of entry into force of this Agreement each duty and charge shall be reduced by 30% of the basic duty, - seven years after the date of entry into force of this Agreement each duty and charge shall be reduced by 40% of the basic duty, - eight years after the date of entry into force of this Agreement each duty and charge shall be reduced by 50% of the basic duty. 3. Customs duties and charges having equivalent effect applicable on import into Jordan of products originating in the Community listed in list A of Annex III shall be progressively abolished in accordance with the following schedule: - on the date of entry into force of this Agreement each duty and charge shall be reduced to 80% of the basic duty, - one year after the date of entry into force of this Agreement each duty and charge shall be reduced to 60% of the basic duty, - two years after the date of entry into force of this Agreement each duty and charge shall be reduced to 40% of the basic duty, - three years after the date of entry into force of this Agreement each duty and charge shall be reduced to 20% of the basic duty, - four years after the date of entry into force of this Agreement the remaining duty and charge shall be abolished. 4. Customs duties and charges having equivalent effect applicable on import into Jordan of products originating in the Community listed in list В of Annex III shall be progressively abolished in accordance with the following schedule: - four years after the date of entry into force of this Agreement each duty and charge shall be reduced to 90% of the basic duty, - five years after the date of entry into force of this Agreement each duty and charge shall be reduced to 80% of the basic duty, - six years after the date of entry into force of this Agreement each duty and charge shall be reduced to 70% of the basic duty, - seven years after the date of entry into force of this Agreement each duty and charge shall be reduced to 60% of the basic duty, - eight years after the date of entry into force of this Agreement each duty and charge shall be reduced to 50% of the basic duty, - nine years after the date of entry into force of this Agreement each duty and charge shall be reduced to 40% of the basic duty, - 10 years after the date of entry into force of this Agreement each duty and charge shall be reduced to 30% of the basic duty, - 11 years after the date of entry into force of this Agreement each duty and charge shall be reduced to 20% of the basic duty, - 12 years after the date of entry into force of this Agreement the remaining duty and charge shall be abolished. 5. As regards the products listed in Annex IV, the arrangements to be applied shall be re-examined by the Association Council four years after the date of entry into force of the Agreement. At the time of that re-examination, the Association Council shall establish a tariff dismantling schedule for the products appearing in Annex IV. 6. In the event of serious difficulties for a given product, the relevant timetables in accordance with paragraphs 2, 3 and 4 may be reviewed by the Association Committee by common accord on the understanding that the timetable for which the review has been requested may not be extended in respect of the product concerned beyond the maximum transitional period of 12 years. If the Association Committee has not taken a decision within 30 days of its application to review the timetable, Jordan may suspend the timetable provisionally for a period which may not exceed one year. 7. For each product the basic duty to which the successive reductions laid down in paragraphs 2, 3 and 4 are to be applied shall be that actually applied vis-a-vis the Community on 1 January 1996. 8. If, after 1 January 1996, any tariff reduction is applied on an erga omnes basis, the reduced duties shall replace the basic duties referred to in paragraph 7 as from the date when such reductions are applied. 9. Jordan shall notify the Community of its basic duties. ##### Article 12 The provisions concerning the abolition of customs duties on imports shall also apply to customs duties of a fiscal nature. ##### Article 13 1. Exceptional measures of limited duration which derogate from the provisions of Article 11 may be taken by Jordan in the form of an increase or reintroduction of customs duties. These measures may only concern infant industries, or certain sectors undergoing restructuring or facing serious difficulties, particularly where these difficulties produce major social problems. Customs duties applicable on import into Jordan of products originating in the Community introduced by these measures may not exceed 25% ad valorem and shall maintain an element of preference for products originating in the Community. The total yearly average value of imports of the products which are subject to these measures may not exceed 20% of the total yearly average value of imports of industrial products originating in the Community during the last three years for which statistics are available. These measures shall be applied for a period not exceeding five years unless a longer duration is authorised by the Association Committee. They shall cease to apply at the latest on the expiry of the maximum transitional period of 12 years. No such measures may be introduced in respect of a product if more than four years have elapsed since the elimination of all duties and quantitative restrictions or charges or measures having equivalent effect concerning that product. Jordan shall inform the Association Committee of any exceptional measures it intends to take and, at the request of the Community, consultations shall be held on such measures and the sectors to which they apply before they are implemented. When taking such measures Jordan shall provide the Committee with a timetable for the elimination of the customs duties introduced under this Article. This timetable shall provide for a phasing-out of these duties in equal annual instalments starting at the latest two years after their introduction. The Association Committee may decide on a different timetable. 2. By way of derogation from the fourth subparagraph of paragraph 1, the Association Committee may exceptionally, in order to take account of the difficulties involved in setting up a new industry and when certain sectors are undergoing restructuring or facing serious difficulties, authorise Jordan to maintain the measures already taken pursuant to paragraph 1 for a maximum period of three years beyond the 12-year transitional period.
Chapter 2 **AGRICULTURAL PRODUCTS**
##### Article 14 The provisions of this Chapter shall apply to products originating in the Community and Jordan and listed in Annex II to the Treaty establishing the European Community. ##### Article 15 The Community and Jordan shall gradually implement greater liberalisation of their reciprocal trade in agricultural products. ##### Article 16 1. Agricultural products originating in Jordan shall benefit on import into the Community from the provisions set out in Protocol 1. 2. Agricultural products originating in the Community shall benefit on import into Jordan from the provisions set out in Protocol 2. ##### Article 17 1. From 1 January 2002, the Community and Jordan shall assess the situation with a view to determining the liberalisation measures to be applied by the Community and Jordan with effect from 1 January 2003 in accordance with the objective set out in Article 15. 2. Without prejudice to the provisions of the preceding paragraph and taking account of the patterns of trade in agricultural products between the Parties and the particular sensitivity of such products, the Community and Jordan may examine on a regular basis in the Association Council, product by product and on a reciprocal basis, the possibilities of granting each other further concessions.
Chapter 3 **COMMON PROVISIONS**
##### Article 18 1. No new quantitative restriction on imports and measures having equivalent effect shall be introduced in trade between the Community and Jordan. 2. Quantitative restrictions on imports and measures having equivalent effect on trade between the Community and Jordan shall be abolished upon the entry into force of this Agreement. 3. The Community and Jordan shall not apply to exports between themselves either customs duties or charges having equivalent effect, or quantitative restrictions or measures having equivalent effect. ##### Article 19 1. In the event of specific rules being introduced as a result of the implementation of its agricultural policy or of any alteration of the current rules or in the event of any alteration or extension of the provisions relating to the implementation of its agricultural policy, the Party concerned may amend the arrangements resulting from the Agreement in respect of the products concerned. 2. In such cases the Party concerned shall inform the Association Committee. At the request of the other Party, the Association Committee shall meet to take due account of the interests of the other Party. 3. If the Community or Jordan, in applying paragraph 1, modifies the arrangements made by this Agreement for agricultural products, they shall accord imports originating in the other Party an advantage comparable to that provided for in this Agreement. 4. The application of this Article may be the subject of consultations in the Association Council. ##### Article 20 1. Products originating in Jordan shall not on importation into the Community be accorded a treatment more favourable than that which the Member States apply among themselves. 2. Application of the provisions of this Agreement shall be without prejudice to Council Regulation (EEC) No. 1911/91 of 26 June 1991 on the application of the provisions of Community law to the Canary Islands. ##### Article 21 1. The Parties shall refrain from any measure or practice of an internal fiscal nature establishing, whether directly or indirectly, discrimination between the products of one Party and like products originating in the territory of the other Party. 2. Products exported to the territory of one of the Parties may not benefit from repayment of indirect internal taxation in excess of the amount of indirect taxation imposed on them either directly or indirectly. ##### Article 22 1. The Agreement shall not preclude the maintenance or establishment of customs unions, free trade areas or arrangements for frontier trade, except in so far as they alter the trade arrangements provided for in the Agreement. 2. Consultation between the Community and Jordan shall take place within the Association Council concerning agreements establishing customs unions or free trade areas and, where appropriate, on other major issues related to their respective trade policy with third countries. In particular, in the event of a third country acceding to the Union, such consultation shall take place so as to ensure that account may be taken of the mutual interests of the Community and Jordan. ##### Article 23 If one of the Parties finds that dumping is taking place in trade with the other Party within the meaning of Article VI of the GATT, it may take appropriate measures against this practice in accordance with the Agreement on implementation of Article VI of the GATT and with its relevant internal legislation, under the conditions and in accordance with the procedures laid down in Article 26. ##### Article 24 Where any product is being imported in such increased quantities and under such conditions as to cause or threaten to cause: - serious injury to domestic producers of like or directly competitive products in all or part of the territory of one of the Parties, or - serious disturbances in any sector of the economy, the Party concerned may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 26. ##### Article 25 Where compliance with the provisions of Article 18(3) leads to: (i) re-export towards a third country against which the exporting Party maintains, for the product concerned, quantitative export restrictions, export duties or measures having equivalent effect; or (ii) a serious shortage, or threat thereof, of a product essential to the exporting Party, and where the situations above referred to give rise, or are likely to give rise to major difficulties for the exporting Party, that Party may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 26. The measures shall be non-discriminatory and be eliminated when conditions no longer justify their maintenance. ##### Article 26 1. In the event of the Community or Jordan subjecting imports of products liable to give rise to the difficulties referred to in Article 24 to an administrative procedure, the purpose of which is to provide rapid information on the trend of trade flows, it shall inform the other Party. 2. In the cases specified in Articles 23, 24 and 25, before taking the measures provided for therein, or, as soon as possible in cases to which paragraph 3(d) applies, the Party in question shall supply the Association Committee with all relevant information required for a thorough examination of the situation with a view to seeking a solution acceptable to the Parties. In the selection of appropriate measures, priority must be given to those which least disturb the functioning of the Agreement. The safeguard measures shall be notified immediately to the Association Committee and shall be the subject of periodic consultations within the Committee, particularly with a view to their abolition as soon as circumstances permit. 3. For the implementation of paragraph 2, the following provisions shall apply: (a) as regards Article 23, the exporting Party shall be informed of the dumping case as soon as the authorities of the importing Party have initiated an investigation. Where no end has been put to the dumping within the meaning of Article VI of GATT or no other satisfactory solution has been reached within 30 days of the notification being made, the importing Party may adopt the appropriate measures; (b) as regards Article 24, the difficulties arising from the situation referred to in that Article shall be referred for examination to the Association Committee, which may take any decision needed to put an end to such difficulties. If the Association Committee or the exporting Party has not taken a decision putting an end to the difficulties or no other satisfactory solution has been reached within 30 days of the matter being referred, the importing Party may adopt the appropriate measures to remedy the problem. These measures must not exceed the scope of what is necessary to remedy the difficulties which have arisen; (c) as regards Article 25, the difficulties arising from the situations referred to in that Article shall be referred for examination to the Association Committee. The Association Committee may take any decision needed to put an end to the difficulties. If it has not taken such a decision within 30 days of the matter being referred to it, the exporting Party may apply appropriate measures on the exportation of the product concerned; (d) where exceptional circumstances requiring immediate action make prior information or examination, as the case may be, impossible, the Party concerned may, in the situations specified in Articles 23, 24 and 25, apply forthwith such precautionary measures as are strictly necessary to remedy the situation, and shall inform the other Party immediately. ##### Article 27 Nothing in this Agreement shall preclude prohibitions or restrictions on imports, exports or goods in transit justified on grounds of public morality, public policy or public security; the protection of health and life of humans, animals or plants; the protection of national treasures possessing artistic, historic or archaeological value; or the protection of intellectual, industrial and commercial property or regulations concerning gold and silver. Such prohibitions or restrictions shall not, however, constitute a means of arbitrary discrimination or a disguised restriction on trade between the Parties. ##### Article 28 The concept of "originating products" for the application of the provisions of this title and the methods of administrative cooperation relating to them are set out in Protocol 3. ##### Article 29 The Combined Nomenclature shall be used for the classification of goods in trade between the Parties.
Chapter 1 **RIGHT OF ESTABLISHMENT**
##### Article 30 1. (a) The Community and its Member States shall grant for the establishment of Jordanian companies treatment no less favourable than that accorded to like companies of any third country. (b) Without prejudice to the reservations listed in Annex V, the Community and its Member States shall grant to subsidiaries of Jordanian companies established in a Member State treatment no less favourable than that accorded to any like Community company, in respect of their operations. (c) The Community and its Member States shall grant to branches of Jordanian companies, established in a Member State, treatment no less favourable than that accorded to like branches of companies of any third country, in respect of their operations. 2. (a) Without prejudice to the reservations listed in Annex VI, Jordan shall grant for the establishment of Community companies in its territory treatment no less favourable than that accorded to its own companies or to companies of any third country, whichever is the better. (b) Jordan shall grant to subsidiaries and branches of Community companies, established in its territory, in respect of their operations, treatment no less favourable than that accorded to its own companies or branches, or to Jordanian subsidiaries or branches of companies of any third country, whichever is the better. 3. The provisions of paragraphs 1(b) and 2(b) cannot be used so as to circumvent a Party's legislation and regulations applicable to access to specific sectors or activities by subsidiaries or branches of companies of the other Party established in the territory of such first Party. The treatment referred to in paragraphs 1(b), 1(c) and 2(b) shall benefit companies, subsidiaries, and branches established in the Community and Jordan respectively at the date of entry into force of this Agreement and companies, subsidiaries and branches established after that date once they are established. ##### Article 31 1. The provisions of Article 30 shall not apply to air transport, inland waterways transport and maritime transport. 2. However, in respect of activities undertaken by shipping agencies for the provision of international maritime transport services, including intermodal activities involving a sea leg, each Party shall permit to the companies of the other Party their commercial presence in its territory in the form of subsidiaries or branches, under conditions of establishment and operation no less favourable than those accorded to its own companies or to subsidiaries or branches of companies of any third country whichever are the better. Such activities include, but are not limited to: (a) marketing and sales of maritime transport and related services through direct contact with customers, from quotation to invoicing, whether these services are operated or offered by the service supplier itself or by service suppliers with which the service seller has established standing business arrangements; (b) purchase and use, on their own account or on behalf of their customer (and the resale to their customers) of any transport and related services, including inward transport services by any mode, particularly inland waterways, road and rail, necessary for the supply of an integrated service; (c) preparation of documentation concerning transport documents, customs documents, or other documents related to the origin and character of the goods transported; (d) provision of business information of any means, including computerised information systems and electronic data interchange (subject to any non-discriminatory restrictions concerning telecommunications); (e) setting up of any business arrangement, including participation in the company's stock and the appointment of personnel recruited locally (or, in the case of foreign personnel, subject to the relevant provisions of this Agreement), with any locally established shipping agency; (f) acting on behalf of the companies, organising the call of the ship or taking over cargoes when required. ##### Article 32 For the purpose of this Agreement: (a) a "Community company" or "Jordanian company" respectively shall mean a company set up in accordance with the laws of a Member State or of Jordan respectively and having its registered office or central administration or principal place of business in the territory of the Community or Jordan respectively. However, should the company, set up in accordance with the laws of a Member State or Jordan respectively, have only its registered office in the territory of the Community or Jordan respectively, the company shall be considered a Community or Jordanian company respectively if its operations possess a real and continuous link with the economy of one of the Member States or Jordan respectively; (b) "subsidiary" of a company shall mean a company which is controlled by the first company; (c) "branch" of a company shall mean a place of business not having legal personality which has the appearance of permanency, such as the extension of a parent body, has a management and is materially equipped to negotiate business with third parties so that the latter, although knowing that there will if necessary be a legal link with the parent body, the head office of which is abroad, do not have to deal directly with such parent body but may transact business at the place of business constituting the extension; (d) "establishment" shall mean the right of Community or Jordanian companies as referred to in point (a) to take up economic activities by means of the setting up of subsidiaries and branches in Jordan or in the Community respectively; (e) "operation" shall mean the pursuit of economic activities; (f) "economic activities" shall mean activities of an industrial, commercial and professional character; (g) "national of a Member State or of Jordan" shall mean a physical person who is a national of one of the Member States or of Jordan respectively; (h) with regard to international maritime transport, including intermodal operations involving a sea leg, nationals of the Member States or of Jordan established outside the Community or Jordan respectively, and shipping companies established outside the Community or Jordan and controlled by nationals of a Member State or Jordanian nationals respectively, shall also be beneficiaries of the provisions of this chapter and Chapter 2 if their vessels are registered in that Member State or in Jordan respectively in accordance with their respective legislation. ##### Article 33 1. The Parties shall use their best endeavours to avoid taking any measures or actions which render the conditions for the establishment and operation of each other's companies more restrictive than the situation existing on the day preceding the date of signature of the Agreement. 2. The provisions of this Article are without prejudice to those of Article 44. The situations covered by Article 44 shall be solely governed by its provisions to the exclusion of any other. ##### Article 34 1. A Community company or Jordanian company established in the territory of Jordan or the Community respectively shall be entitled to employ, or have employed by one of its subsidiaries or branches, in accordance with the legislation in force in the host country of establishment, in the territory of Jordan and the Community respectively, employees who are nationals of Community Member States and Jordan respectively, provided that such employees are key personnel as defined in paragraph 2, and that they are employed exclusively by such companies, subsidiaries or branches. The residence and work permits of such employees shall only cover the period of such employment. 2. Key personnel of the abovementioned companies herein referred to as "organisations" are "intra-corporate transferees" as defined in (c) in the following categories, provided that the organisation is a legal person and that the persons concerned have been employed by it or have been partners in it (other than as majority shareholders), for at least the year immediately preceding such movement: (a) persons working in a senior position with an organisation, who primarily direct the management of the establishment, receiving general supervision or direction principally from the board of directors or stockholders of the business or their equivalent, including: - directing the establishment or a department or subdivision of the establishment, - supervising and controlling the work of other supervisory, professional or managerial employees, - having the authority personally to recruit and dismiss or recommend recruiting, dismissing or other personnel actions; (b) persons working within an organisation who possess uncommon knowledge essential to the establishment's service, research equipment, techniques or management. The assessment of such knowledge may reflect, apart from knowledge specific to the establishment, a high level of qualification referring to a type of work or trade requiring specific technical knowledge, including membership of an accredited profession; (c) an "intra-corporate transferee" is defined as a natural person working within an organisation in the territory of a Party, and being temporarily transferred in the context of pursuit of economic activities in the territory of the other Party; the organisation concerned must have its principal place of business in the territory of a Party and the transfer be to an establishment (branch, subsidiary) of that organisation, effectively pursuing like economic activities in the territory of the other Party. 3. The entry into and the temporary presence within the respective territories of Jordan and the Community of nationals of the Member States or of Jordan respectively, shall be permitted, when these representatives of companies are persons working in a senior position, as defined in paragraph 2(a), within a company, and are responsible for the establishment of a Jordanian or a Community company, in the Community or Jordan respectively, when: - those representatives are not engaged in making direct sales or supplying services, and - the company has no other representative, office, branch or subsidiary in a Community Member State or Jordan respectively. ##### Article 35 In order to make it easier for Community nationals and Jordanian nationals to take up and pursue regulated professional activities in Jordan and the Community respectively, the Association Council shall examine what steps are necessary to be taken to provide for the mutual recognition of qualifications. ##### Article 36 The provisions of Article 30 do not preclude the application by a Party of particular rules concerning the establishment and operation in its territory of branches of companies of another Party not incorporated in the territory of the first Party, which are justified by legal or technical differences between such branches as compared to branches of companies incorporated in its territory or, as regards financial services, for prudential reasons. The difference in treatment shall not go beyond what is strictly necessary as a result of such legal or technical differences or, as regards financial services, for prudential reasons.
Chapter 2 **CROSS-BORDER SUPPLY OF SERVICES**
##### Article 37 1. The Parties shall use their best endeavours to allow progressively the supply of services by Community or Jordanian companies which are established in the territory of a Party other than that of the person for whom the services are intended, taking into account the development of the services sectors in the Parties. 2. The Association Council shall make recommendations for the implementation of the objective mentioned in paragraph 1. ##### Article 38 With a view to assuring a coordinated development of transport between the Parties, adapted to their commercial needs, the conditions of mutual market access and provision of services in transport by road, rail and inland waterways and, if applicable, in air transport may be dealt with by specific agreements where appropriate negotiated between the Parties after the entry into force of this Agreement. ##### Article 39 1. With regard to maritime transport the Parties undertake to apply effectively the principle of unrestricted access to the international market and traffic on a commercial basis. (a) The above provision does not prejudice the rights and obligations arising under the United Nations Convention on a Code of Conduct for Liner Conferences, as applicable to a Party to this Agreement. Non-conference lines shall be free to operate in competition with a conference line as long as they adhere to the principle of fair competition on a commercial basis. (b) The Parties affirm their commitment to a freely competitive environment as being an essential feature of the dry and liquid bulk trade. 2. In applying the principles of paragraph 1, the Parties shall: (a) not introduce cargo-sharing arrangements in future bilateral Agreements with third countries concerning dry and liquid bulk and liner trade. However, this does not exclude the possibility of such arrangements concerning liner cargo in those exceptional circumstances where liner shipping companies from one or other Party to this Agreement would not otherwise have an effective opportunity to ply for trade to and from the third country concerned; (b) abolish, upon entry into force of this Agreement, all unilateral measures, administrative, technical and other obstacles which could constitute a disguised restriction or have discriminatory effects on the free supply of services in international maritime transport. Each Party shall grant, inter alia, a treatment no less favourable than that accorded to its own ships, for the ships used for the transport of goods, passengers or both, and operated by nationals or companies of the other Party, with respect to access to ports, the use of infrastructure and auxiliary maritime services of those ports, as well as related fees and charges, customs facilities and the assignment of berths and facilities for loading and unloading.
Chapter 3 **GENERAL PROVISIONS**
##### Article 40 1. The Parties undertake to consider development of this title with a view to the establishment of an "economic integration agreement" as defined in Article V of the General Agreement on Trade in Services (GATS). 2. The objective provided for in paragraph 1 shall be subject to a first examination by the Association Council at the latest five years after the entry into force of this Agreement. 3. The Association Council shall, when making such examination, take into account progress made in the approximation of laws between the Parties in the relevant activities. ##### Article 41 1. The provisions of this Title shall be applied subject to limitations justified on grounds of public policy, public security or public health. 2. They shall not apply to activities which in the territory of either Party are connected, even occasionally, with the exercise of official authority. ##### Article 42 For the purpose of this title, nothing in this Agreement shall prevent the Parties from applying their laws and regulations regarding entry and stay, work, labour conditions and establishment of natural persons and supply of services, provided that, in so doing, they do not apply them in a manner as to nullify or impair the benefits accruing to any Party under the terms of a specific provision of the Agreement. This provision does not prejudice the application of Article 41. ##### Article 43 Companies which are controlled and exclusively owned by Jordanian companies and Community companies jointly shall also be beneficiaries of the provisions of this title. ##### Article 44 Treatment granted by either Party to the other hereunder shall, as from the day one month prior to the date of entry into force of the relevant obligations of the GATS, in respect of sectors or measures covered by the GATS, in no case be more favourable than that accorded by such first Party under the provisions of the GATS and this in respect of each service sector, subsector and mode of supply. ##### Article 45 For the purpose of this title, no account shall be taken of treatment accorded by the Community, its Member States or Jordan pursuant to commitments entered into in economic integration agreements in accordance with the principles of Article V of the GATS. ##### Article 46 1. Notwithstanding any other provisions of the Agreement, a Party shall not be prevented from taking measures for prudential reasons, including for the protection of investors, depositors, policy holders or persons to whom a fiduciary duty is owed by a financial service supplier, or to ensure the integrity and stability of the financial system. Where such measures do not conform with the provisions of the Agreement, they shall not be used as a means of avoiding the obligations of a Party under the Agreement. 2. Nothing in the Agreement shall be construed to require a Party to disclose information relating to the affairs and accounts of individual customers or any confidential or proprietary information in the possession of public entities. ##### Article 47 The provisions of this Agreement shall not prejudice the application by each Party of any measures necessary to prevent the circumvention of its measures concerning third country access to its market, through the provisions of this Agreement.
Chapter 1 **PAYMENTS AND CAPITAL MOVEMENTS**
##### Article 48 Subject to the provisions of Articles 51 and 52, current payments connected with the movement of goods, persons, services and capital within the framework of this Agreement shall be free of restrictions. ##### Article 49 1. Within the framework of the provisions of this Agreement, subject to the provisions of Articles 50 and 51, and without prejudice to Annex VI referred to in Article 30(2)(a), there shall be no restrictions on the movement of capital from the Community to Jordan and on the movement of capital involving direct investment from Jordan to the Community. 2. The outflow of Jordanian capital to the Community, other than direct investment, shall be subject to the prevailing laws in Jordan. 3. The Parties will hold consultations with a view to achieving complete liberalisation of capital movements as soon as conditions are met. ##### Article 50 Subject to other provisions in this Agreement and other international obligations of the Community and Jordan, the provisions of Article 49 shall be without prejudice to the application of any restrictions which exist between them on the date of entry into force of this Agreement, in respect of the movement of capital between them involving direct investment, including real estate, and establishment. However, the transfer abroad of investments made in Jordan by Community residents or in the Community by Jordanian residents and of any profits stemming therefrom shall not be affected. ##### Article 51 Where, in exceptional circumstances, movements of capital between the Community and Jordan cause, or threaten to cause, serious difficulties for the operation of exchange-rate policy or monetary policy in the Community or Jordan, the Community or Jordan respectively may, in conformity with the conditions laid down within the framework of the GATS and with Articles VIII and XIV of the Articles of Agreement of the International Monetary Fund, take safeguard measures with regard to movements of capital between the Community and Jordan for a period not exceeding six months if such measures are strictly necessary. ##### Article 52 Where one or more Member States of the Community or Jordan face or risk facing serious difficulties concerning balance of payments, the Community and Jordan respectively may, in conformity with the conditions laid down within the framework of the GATT and with Articles VIII and XIV of the Articles of Agreement of the International Monetary Fund, take restrictive measures with regard to current payments if such measures are strictly necessary. The Community or Jordan, as appropriate, shall inform the other Party immediately thereof and shall provide as soon as possible a timetable for the removal of such measures.
Chapter 2 **COMPETITION AND OTHER ECONOMIC MATTERS**
##### Article 53 1. The following are incompatible with the proper functioning of the Agreement, in so far as they may affect trade between the Community and Jordan: (a) all agreements between undertakings, decisions by associations of undertakings and concerted practices between undertakings which have as their object or effect the prevention, restriction or distortion of competition; (b) abuse by one or more undertakings of a dominant position in the territories of the Community or Jordan as a whole or in a substantial part thereof; (c) any public aid which distorts or threatens to distort competition by favouring certain undertakings or the production of certain goods. 2. Any practice contrary to this Article shall be assessed on the basis of the criteria resulting from the application of the rules contained in Articles 85, 86 and 92 of the Treaty establishing the European Community, and, for products covered by the Treaty establishing the European Coal and Steel Community, by those contained in Articles 65 and 66 of that Treaty and the Community rules on State aids, including secondary legislation. 3. The Association Council shall, within five years of the entry into force of the Agreement, adopt by decision the necessary rules for the implementation of paragraphs 1 and 2. Until these rules are adopted, the provisions of the Agreement on interpretation and application of Articles VI, XVI and XXIII of the GATT shall be applied as the rules for the implementation of paragraph 1(c) and the relevant parts of paragraph 2. 4. (a) For the purposes of applying the provisions of paragraph 1(c), the Parties recognise that, during the first five years of the entry into force of the Agreement, any public aid granted by Jordan to undertakings shall be assessed taking into account the fact that Jordan shall be regarded as an area identical to those areas of the Community where the standard of living is abnormally low or where there is serious underemployment, as described in Article 92(3)(a) of the Treaty establishing the European Community. The Association Council shall, taking into account the economic situation of Jordan, decide whether that period should be extended for further periods of five years. (b) Each Party shall ensure transparency in the area of public aid, inter alia, by reporting annually to the other Party on the total amount and the distribution of the aid given and by providing, upon request, information on aid schemes. Upon request by one Party, the other Party shall provide information on particular individual cases of public aid. 5. With regard to products referred to in Title II, Chapter 2: - paragraph 1(c) does not apply, - any practices contrary to paragraph 1(a) shall be assessed according to the criteria established by the Community on the basis of Articles 42 and 43 of the Treaty establishing the European Community and in particular those established in Council Regulation No. 26/62. 6. If the Community or Jordan considers that a particular practice is incompatible with the terms of paragraph 1, and: - is not adequately dealt with under the implementing rules referred to in paragraph 3, or - in the absence of such rules, and if such practice causes or threatens to cause serious prejudice to the interest of the other Party or material injury to its domestic industry, including its services industry, it may take appropriate measures after consultation within the Association Committee or after 30 working days following referral for such consultation. With reference to practices incompatible with paragraph 1(c) of this Article, such appropriate measures, when the GATT is applicable to them, may only be adopted in accordance with the procedures and under the conditions laid down by the GATT or by any other relevant instrument negotiated under its auspices and applicable to the Parties. 7. Notwithstanding any provisions to the contrary adopted in conformity with paragraph 3, the Parties shall exchange information taking into account the limitations imposed by the requirements of professional and business secrecy. ##### Article 54 The Member States and Jordan shall progressively adjust, without prejudice to their commitments respectively taken or to be taken under the GATT, any State monopolies of a commercial character, so as to ensure that, by the end of the fifth year following the entry into force of this Agreement, no discrimination regarding the conditions under which goods are procured and marketed exists between nationals of the Member States and Jordan. The Association Committee will be informed about the measures adopted to implement this objective. ##### Article 55 With regard to public enterprises and enterprises to which special or exclusive rights have been granted, the Association Council shall ensure that as from the fifth year following the date of entry into force of this Agreement there is neither enacted nor maintained any measure distorting trade between the Community and Jordan to an extent contrary to the Parties' interests. This provision should not obstruct the performance in law or in fact of the particular tasks assigned to these enterprises. ##### Article 56 1. Pursuant to the provisions of this Article and of Annex VII, the Parties shall grant and ensure adequate and effective protection of intellectual, industrial and commercial property rights in accordance with the highest international standards, including effective means of enforcing such rights. 2. The implementation of this Article and of Annex VII shall be regularly reviewed by the Parties. If problems in the area of intellectual, industrial and commercial property affecting trading conditions were to occur, urgent consultation shall be undertaken, at the request of either Party, with a view to reaching mutually satisfactory solutions. ##### Article 57 The Parties shall aim to reduce differences in standardisation and conformity assessment. To this end the Parties shall conclude where appropriate agreements on mutual recognition in the field of conformity assessment. ##### Article 58 The Parties agree on the objective of a gradual liberalisation of public procurement. The Association Council will hold consultations on the implementation of this objective.
Article 59
Objectives 1. The Parties undertake to intensify economic cooperation in their mutual interest and in accordance with the overall objectives of the Agreement. 2. The aim of economic cooperation shall be to support Jordan's own efforts to achieve sustainable economic and social development. Article 60 Scope 1. Cooperation shall focus primarily on sectors suffering from internal difficulties or affected by the overall process of liberalisation of the Jordanian economy, and in particular by the liberalisation of trade between Jordan and the Community. 2. Similarly, cooperation shall focus on areas likely to bring the economies of the Community and Jordan closer together, particularly those which will generate growth and employment. 3. The Parties will encourage economic cooperation between Jordan and other countries of the region. 4. Conservation of the environment and ecological balance shall be taken into account in the implementation of the various sectors of economic cooperation to which it is relevant. 5. The Parties may agree to extend economic cooperation to other sectors not covered by the provisions of this Title.
Article 61
Methods and modalities Economic cooperation shall be implemented in particular by: (a) a regular economic dialogue between the Parties, which covers all areas of macroeconomic policy; (b) regular exchange of information and ideas in every sector of cooperation including meetings of officials and experts; (c) transfer of advice, expertise and training; (d) implementation of joint actions such as seminars and workshops; (e) technical, administrative and regulatory assistance; (f) encouragement of joint ventures.
Article 62
Regional cooperation The Parties will encourage operations having a regional impact or associating other countries of the region, with a view to promoting regional cooperation. Such operations may include: - trade at intra-regional level, - environmental issues, - development of economic infrastructures, - scientific and technological research, - cultural matters, - customs matters.
Article 63
Education and training The Parties shall cooperate with the objective of identifying and employing the most effective means of improving significantly the education and vocational training situation, in particular with regard to public and private enterprises, trade-related services, public administrations and authorities, technical agencies, standardisation and certification bodies and other relevant organisations. In this context, vocational training for industrial restructuring will receive special attention. Cooperation shall also encourage the establishment of links between specialised bodies in the Community and in Jordan and shall promote the exchange of information and experiences and the pooling of technical resources.
Article 64
Scientific and technological cooperation Cooperation has the objective of: (a) encouraging the establishment of durable links between the scientific communities of the Parties, notably through: - the access of Jordan to Community R & D programmes, in conformity with the existing provisions concerning the participation of third countries, - the participation of Jordan in the networks of decentralised cooperation, - the promotion of synergy between training and research; (b) strengthening the research capacity of Jordan; (c) stimulating technological innovation, transfer of new technologies, and dissemination of know-how, in particular with a view to accelerating the adjustment of Jordanian industrial capability.
Article 65
Environment 1. Cooperation is aimed at preventing deterioration of the environment, controlling pollution and ensuring the rational use of natural resources, with a view to ensuring sustainable development and promoting regional environmental projects. 2. Cooperation shall focus, in particular, on: - desertification, - quality of sea water and the control and prevention of marine pollution, - water resource management, - appropriate use of energy, - waste management, - the impact of industrial development on the environment in general and the safety of industrial plant in particular, - the impact of agriculture on soil and water quality, - environmental education and awareness, - use of advanced tools of environment management, environmental monitoring methods and surveillance, including in particular the use of the Environmental Information System (EIS) and environmental impact assessment techniques, - salinisation.
Article 66
Industrial cooperation Cooperation shall promote and encourage in particular: - industrial cooperation between economic operators in the Community and in Jordan, including access for Jordan to the Community's networks for the rapprochement of businesses and to networks created in the context of decentralised cooperation, - the modernisation and restructuring of Jordanian industry, - the establishment and promotion of an environment favourable to the development of private enterprise, in order to stimulate the growth and the diversification of industrial production, - cooperation between small and medium-sized enterprises in the Community and in Jordan, - technology transfer, innovation and R & D, - diversification of industrial output in Jordan, - the enhancement of human resources, - improvement of access to investment finance, - stimulation of innovation, - improvement of information support services.
Article 67
Investments and promotion of investments The objective of cooperation will be the creation of a favourable and stable environment for investment in Jordan. The cooperation will entail the development of: - harmonised and simplified administrative procedures; coinvestment machinery, especially for small and medium-sized enterprises of both Parties; and information channels and means of identifying investment opportunities, - a legal environment conducive to investment between the two Parties, where appropriate through the conclusion by the Member States and Jordan of investment protection agreements and agreements to prevent double taxation, - access to the capital market for the financing of productive investments, - joint ventures between Jordanian and Community business.
Article 68
Standardisation and conformity assessment Cooperation in this field will be aimed in particular at: (a) increasing the application of Community rules in the field of standardisation, metrology, quality standards, and recognition of conformity; (b) upgrading the level of Jordanian conformity assessment bodies, with a view to the establishment, in due time and to the extent feasible, of agreements of mutual recognition of conformity assessment; (c) developing structures and bodies for the protection of intellectual, industrial and commercial property, for standardisation and for setting quality standards.
Article 69
Approximation of laws The Parties shall use their best endeavours to approximate their respective laws in order to facilitate the implementation of this Agreement.
Article 70
Financial services The Parties shall cooperate with a view to the approximation of their standards and rules, in particular: (a) to strengthen and restructure the financial sector in Jordan; (b) to improve accounting and supervisory and regulatory systems of banking, insurance and other financial sectors in Jordan.
Article 71
Agriculture The Parties shall focus cooperation in particular on: - support for policies implemented by them to diversify production, - promotion of environment-friendly agriculture, - closer relations between businesses, groups and organisations representing trades and professions in Jordan and in the Community on a voluntary basis, - technical assistance and training, - harmonisation of phytosanitary and veterinary standards, - integrated rural development, including improvement in basic services and development of associated economic activities, - cooperation among rural regions, exchange of experience and know-how concerning rural development.
Article 72
Transport Cooperation is aimed at: - the restructuring and modernisation of road, port and airport infrastructures linked to the main trans-European communication routes of common interest, - the establishment and enforcement of operating standards comparable to those prevailing in the Community, - the upgrading of technical equipment to bring it up to Community standards for road/rail transport, container traffic and transhipment, - the gradual easing of transit requirements, - the improvement of management of airports, railways and air traffic control, including cooperation between the relevant national bodies.
Article 73
Information infrastructures and telecommunications Cooperation shall focus on: (a) telecommunications in general; (b) standardisation, conformity testing and certification for information technology and telecommunications; (c) dissemination of new information technologies, particularly in relation to networks and the interconnection of networks (ISDN (integrated services digital networks) and EDI (electronic data interchange)); (d) stimulating research on and development of new communication and information technology facilities to develop the market in equipment, services and applications related to information technology and to communications, services and installations.
Article 74
Energy The priority areas of cooperation will be: - the promotion of renewable energies and indigenous energy sources, - the promotion of energy-saving and energy efficiency, - applied research into databank networks in the economic and social sectors, linking Community and Jordanian operators in particular, - support for the modernisation and development of energy networks and for their link-up to Community networks. Cooperation will also focus on facilitating transit of gas, oil and electricity.
Article 75
Tourism Priorities for cooperation in this sphere shall be: - improving the knowledge of the tourist industry and ensuring greater consistency of policies affecting tourism, - promoting a good seasonal spread of tourism, - promoting cooperation between regions and cities of neighbouring countries, - improving information for tourists and the protection of their interests, - highlighting the importance of the cultural heritage for tourism, - ensuring that the interaction between tourism and the environment is suitably maintained, - making tourism more competitive through support for increased professionalism, in particular with regard to hotel management, - exchanging information on planned tourism development and tourism marketing projects, tourism shows, exhibitions, conventions and publications.
Article 76
Customs 1. The Parties commit themselves to developing customs cooperation to ensure that the provisions on trade are observed. Cooperation will focus in particular on: (a) the simplification of controls and procedures concerning the customs clearance of goods; (b) the use of the single administrative document and a system to link up the Community's and Jordan's transit arrangements. 2. Without prejudice to other forms of cooperation envisaged in this Agreement, notably for the fight against drugs and money laundering, the Parties' administrations will provide mutual assistance in accordance with the provisions of Protocol 4.
Article 77
Cooperation on statistics The main objective of cooperation in this field will be to harmonise methodology in order to create a reliable basis for handling statistics on trade, population, migration and generally all the fields which are covered by this Agreement and lend themselves to the establishment of statistics.
Money laundering
1. The Parties shall cooperate with a view in particular to preventing the use of their financial systems to launder the proceeds arising from criminal activities in general and drug trafficking in particular. 2. Cooperation in this field shall include, in particular, technical and administrative assistance aimed at establishing standards relating to the fight against money laundering, equivalent to those adopted by the Community and other relevant international bodies, in particular the Financial Action Task Force (FATF).
Article 79
Fight against drugs 1. The Parties shall cooperate with a view in particular to: - improving the effectiveness of policies and measures to counter the supply of, and illicit trafficking in, narcotic drugs and psychotropic substances and the reduction of the abuse of these products, - encouraging a joint approach to reducing the illicit consumption thereof. 2. The Parties shall determine together, in accordance with their respective legislation, the strategies and cooperation methods appropriate for attaining these objectives. Their operations, other than joint operations, shall form the subject of consultations and close coordination. The relevant public and private sector bodies, in accordance with their own powers, working with the competent bodies of Jordan, the Community and its Member States, may take part in these operations. 3. Cooperation shall take the form of exchanges of information and, where appropriate, joint activities on: - establishment or extension of social and health institutions and information centres for the treatment and rehabilitation of drag addicts, - implementation of projects in the areas of prevention, training and epidemiological research, - establishment of standards relating to the prevention of the diversion of precursors and other essential substances used for the illicit production of narcotic drugs and psychotropic substances, equivalent to those adopted by the Community and the international authorities concerned, notably by the Chemical Action Task Force (CATF).
Chapter 1 **SOCIAL DIALOGUE**
##### Article 80 1. A regular dialogue shall be established between the Parties on all social issues of mutual interest. 2. This dialogue shall be used to seek ways and means to further progress as regards the movement of workers and the equal treatment and social integration of Jordanian and Community nationals legally residing in their host countries. 3. The dialogue shall focus on problems related to: (a) migrant communities' living and working conditions; (b) migration; (c) illegal immigration and the conditions attaching to the repatriation of illegal immigrants under the legislation on residence and establishment in the host country; (d) projects and programmes on equality of treatment for Jordanian and Community nationals, reciprocal awareness of cultures and civilizations, the development of tolerance and the elimination of discrimination. ##### Article 81 Social dialogue shall be conducted at the same level and following the same procedures as those provided for in Title I of this Agreement, which can be used as a framework for this dialogue.
Chapter 2 **SOCIAL COOPERATION ACTIONS**
##### Article 82 1. The Parties acknowledge the importance of social development which should go hand in hand with any economic development. They give particular priority to respect of basic social rights. 2. To consolidate social cooperation between the Parties, actions and programmes shall be undertaken on any issue of interest to them. Priority shall be given to the following actions: (a) reduction of migratory pressures through job creation and the development of training in areas with a high emigration rate; (b) reintegration of repatriated illegal immigrants; (c) promotion of the role of women in social and economic development, particularly through education and the media, in line with Jordanian policy in this area; (d) development and consolidation of Jordanian family planning and mother and child protection programmes; (e) improving the social security system; (f) improving the healthcare system; (g) improving living conditions in underprivileged, densely populated areas; (h) implementation and financing of exchange and leisure programmes for mixed groups of young Jordanians and Europeans residing in the Member States, with a view to promoting mutual cultural understanding and tolerance. ##### Article 83 Cooperation projects may be coordinated with the Member States and the appropriate international organisations. ##### Article 84 A working party shall be set up by the Association Council by the end of the first year following entry into force of this Agreement. Its brief shall be to evaluate the implementation of the provisions of Chapters 1 and 2 on an ongoing basis.
Chapter 3 **CULTURAL COOPERATION AND EXCHANGE OF INFORMATION**
##### Article 85 1. To foster mutual knowledge and understanding, and in line with projects that have already been developed along these lines, the Parties shall undertake, in a spirit of mutual cultural respect, to establish firm foundations for a continuing cultural dialogue and to promote long-term cultural cooperation in any appropriate field of activity. 2. The Parties shall, in identifying cooperation projects and programmes and joint activities, give special attention to young people, to self-expression and communication skills using written and audiovisual media, to heritage conservation issues and to the dissemination of culture. 3. The Parties agree that existing cultural cooperation programmes in the Community and the Member States can be extended to Jordan. 4. The Parties shall promote activities of mutual interest in the field of information and communications. In order to achieve the objectives of this Agreement, a financial cooperation package shall be made available to Jordan in accordance with the appropriate procedures and the financial resources required. These procedures shall be agreed by both Parties using the most appropriate instruments after the Agreement has entered into force. In addition to the areas covered by Titles V and VI of the Agreement, financial cooperation shall focus on: - promoting reforms designed to modernise the economy, - upgrading economic infrastructure, - promoting private investment and job-creating activities, - responding to the economic repercussions for Jordan of the gradual introduction of a free trade area, notably by upgrading and restructuring industry, - accompanying the policies implemented in the social sector. In the framework of the existing Community Financial Instruments aimed at supporting the structural adjustment programmes in the Mediterranean countries, and in close cooperation with the Jordanian authorities and other donors, particularly with other international financial institutions, the Community will examine suitable ways of supporting structural policies carried out by Jordan to restore financial equilibrium in the main financial aggregates and encourage the creation of an economic environment conducive to increased growth, while at the same time improving the social well-being of the population. In order to ensure that a coordinated approach is adopted to any exceptional macroeconomic and financial problems that might arise as a result of the implementation of this Agreement, the Parties shall use the regular economic dialogue provided for in Title V to give particular attention to monitoring trade and financial trends in relations between the Community and Jordan. An Association Council is hereby established which shall meet at ministerial level once a year and when circumstances require, at the initiative of its Chairman and in accordance with the conditions laid down in its Rules of Procedure. It shall examine any major issues arising within the framework of this Agreement and any other bilateral or international issues of mutual interest. 1. The Association Council shall consist of the members of the Council of the European Union and members of the Commission of the European Communities, on the one hand, and members of the Government of Jordan, on the other. 2. Members of the Association Council may arrange to be represented in accordance with the provisions laid down in its Rules of Procedure. 3. The Association Council shall establish its Rules of Procedure. 4. The Association Council shall be chaired in turn by a member of the Council of the European Union and a member of the Government of Jordan, in accordance with the provisions laid down in its Rules of Procedure. The Association Council shall, for the purpose of attaining the objectives of the Agreement, have the power to take decisions in the cases provided for therein. The decisions taken shall be binding on the Parties which shall take the measures necessary to implement the decisions taken. The Association Council may also make appropriate recommendations. It shall draw up its decisions and recommendations by agreement between the two Parties. 1. Subject to the powers of the Council, an Association Committee is hereby established which shall be responsible for the implementation of the Agreement. 2. The Association Council may delegate to the Association Committee, in full or in part, any of its powers. 1. The Association Committee, which shall meet at official level, shall consist of representatives of members of the Council of the European Union and of members of the Commission of the European Communities, on the one hand, and of representatives of the Government of Jordan, on the other. 2. The Association Committee shall establish its Rules of Procedure. 3. The Association Committee shall be chaired in turn by a representative of the Presidency of the Council of the European Union and by a representative of the Government of Jordan. 1. The Association Committee shall have the power to take decisions for the management of the Agreement as well as in the areas in which the Council has delegated its powers to it. 2. It shall draw up its decisions by agreement between the two Parties. These decisions shall be binding on the Parties which shall take the measures necessary to implement the decisions taken. The Association Council may decide to set up any working group or body necessary for the implementation of the Agreement. The Association Council shall take all appropriate measures to facilitate cooperation and contacts between the European Parliament and the Jordanian Parliament. 1. Each of the Parties may refer to the Association Council any dispute relating to the application or interpretation of this Agreement. 2. The Association Council may settle the dispute by means of a decision. 3. Each Party shall be bound to take the measures involved in carrying out the decision referred to in paragraph 2. 4. In the event of it not being possible to settle the dispute in accordance with paragraph 2 of this Article, either Party may notify the other of the appointment of an arbitrator; the other Party must then appoint a second arbitrator within two months. For the application of this procedure, the Community and the Member States shall be deemed to be one Party to the dispute. The Association Council shall appoint a third arbitrator. The arbitrators' decisions shall be taken by majority vote. Each Party to the dispute must take the steps required to implement the decision of the arbitrators. Nothing in the Agreement shall prevent a Party from taking any measures: (a) which it considers necessary to prevent the disclosure of information contrary to its essential security interests; (b) which relate to the production of, or trade in, arms, munitions or war materials or to research, development or production indispensable for defence purposes, provided that such measures do not impair the conditions of competition in respect of products not intended for specifically military purposes; (c) which it considers essential to its own security in the event of serious internal disturbances affecting the maintenance of law and order, in time of war or serious international tension constituting threat of war or in order to carry out obligations it has accepted for the purpose of maintaining peace and international security. In the fields covered by this Agreement and without prejudice to any special provisions contained therein: - the arrangements applied by Jordan in respect of the Community shall not give rise to any discrimination between the Member States, their nationals or their companies or firms, - the arrangements applied by the Community in respect of Jordan shall not give rise to discrimination between Jordanian nationals or its companies or firms. As regards direct taxation, nothing in the Agreement shall have the effect of: - extending the fiscal advantages granted by either Party in any international agreement or arrangement by which it is bound, - preventing the adoption or application by either Party of any measure aimed at preventing the avoidance or evasion of taxes, - opposing the right of either Party to apply the relevant provisions of its tax legislation to taxpayers who are not in identical situations, in particular as regards their place of residence. 1. The Parties shall take any general or specific measures required to fulfil their obligations under the Agreement. They shall see to it that the objectives set out in the Agreement are attained. 2. If either Party considers that the other Party has failed to fulfil an obligation under the Agreement, it may take appropriate measures. Before so doing, except in cases of special urgency, it shall supply the Association Council with all relevant information required for a thorough examination of the situation with a view to seeking a solution acceptable to the Parties. In the selection of measures priority must be given to those which least disturb the functioning of the Agreement. These measures shall be notified immediately to the Association Council and shall be the subject of consultations within the Association Council if the other Party so requests. Protocols 1 to 4 and Annexes I to VII shall form an integral part of this Agreement. Declarations and Exchanges of Letters shall appear in the Final Act, which shall likewise form an integral part of this Agreement. For the purposes of this Agreement the term "Parties" shall mean, on the one part, the Community or the Member States, or the Community and the Member States, in accordance with their respective powers, and, on the other part, Jordan. The Agreement is concluded for an unlimited period. Each of the Parties may denounce the Agreement by notifying the other Party. The Agreement shall cease to apply six months after the date of such notification. This Agreement shall apply, on the one hand, to the territories in which the Treaties establishing the European Community, and the European Coal and Steel Community are applied and under the conditions laid down in those Treaties and, on the other hand, to the territory of Jordan. This Agreement, drawn up in duplicate in the Danish, Dutch, English, Finnish, French, German, Greek, Italian, Portuguese, Spanish, Swedish and Arabic languages, each of these texts being equally authentic, shall be deposited with the General Secretariat of the Council of the European Union. 1. This Agreement will be approved by the Parties in accordance with their own procedures. This Agreement shall enter into force on the first day of the second month following the date on which the Parties notify each other that the procedures referred to in the first paragraph have been completed. 2. Upon its entry into force this Agreement shall replace the Cooperation Agreement between the European Economic Community and the Hashemite Kingdom of Jordan, and the Agreement between the Member States of the European Coal and Steel Community and the Hashemite Kingdom of Jordan, signed in Brussels on 18 January 1977. Done at Brussels on the twenty-fourth day of November in the year one thousand nine hundred and ninety-seven. Annex I **LIST OF PRODUCTS REFERRED TO IN ARTICLE 10(1)** | CN code | Description | | --- | --- | | 0403 | Buttermilk, curdled milk and cream, yogurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa: | | 0403 10 51 to | - - Yoghurt, flavoured or containing added | | 0403 10 99 | fruit, nuts or cocoa | | 0403 90 71 to | - - Other, flavoured or containing added fruit, | | 0403 90 99 | nuts or cocoa | | 0405 | Butter and other fats and oils derived from milk; dairy spreads: | | 0405 20 | - Dairy spreads: | | 0405 20 10 | - - Of a fat content, by weight, of 39% or more, but less than 60% | | 0405 20 30 | - - Of a fat content, by weight, of 60% or more, but not exceeding 75% | | 0710 40 00 | Sweetcorn (uncooked or cooked by steaming or boiling in water), frozen | | 0711 90 30 | Sweetcorn provisionally preserved (for example, by sulphur dioxide gas, in brine, in sulphur water or in other preservative solution), but unsuitable in that state for immediate consumption | | ex 1517 | Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this chapter, other than edible fats or oils or their fractions of heading heading No. 1516: | | 1517 10 10 | - Margarine, excluding liquid margarine, containing more than 10% but not more than 15% by weight of milk fats | | 1517 90 10 | - Other, containing more than 10% but not more than 15% by weight of milk fats | | 1702 50 00 | Chemically pure fructose | | ex 1704 | Sugar confectionery (including white chocolate), not containing cocoa; excluding liquorice extract containing more than 10% by weight of sucrose but not containing other added substances, falling within CN code 1704 90 10 | | 1806 | Chocolate and other food preparation containing cocoa | | ex 1901 | Malt extract; food preparations of flour, meal, starch or malt extract, not containing cocoa powder or containing less than 40% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of heading Nos. 0401 to 0404, not containing cocoa powder or containing less than 5% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included, excluding preparations falling within CN code 1901 90 91 | | ex 1902 | Pasta, excluding stuffed pasta falling within CN codes 1902 20 10 and 1902 20 30; couscous, whether or not prepared | | 1903 00 00 | Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or similar forms | | 1904 | Prepared food obtained by the swelling or roasting of cereals or cereal products (for example cornflakes); cereals (other than maize (corn)), in grain form, or in the form of flakes or other worked grains (except flour and meal), precooked, or otherwise prepared, not elsewhere specified or included | | 1905 | Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products | | 2001 90 30 | Sweetcorn (Zea mays var. saccharata), prepared or preserved by vinegar or acetic acid | | 2001 90 40 | Yams, sweet potatoes and similar edible parts of plants containing 5% or more by weight of starch, prepared or preserved by vinegar or acetic acid | | 2004 10 91 | Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid, frozen | | 2004 90 10 | Sweetcorn (Zea mays var. saccharata), prepared or preserved otherwise than by vinegar or acetic acid, frozen | | 2005 20 10 | Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid, not frozen | | 2005 80 00 | Sweetcorn (Zea mays var. saccharata), prepared or preserved otherwise than by vinegar or acetic acid, not frozen | | 2008 99 85 | Maize (corn), other than sweetcorn (Zea mays var. saccharata) otherwise prepared or preserved, not containing added spirit or added sugar | | 2008 99 91 | Yams, sweet potatoes and similar edible parts of plants, containing 5% or more by weight of starch, otherwise prepared or preserved, not containing added spirit or added sugar | | 2101 12 98 | Preparations with a basis of coffee | | 2101 20 98 | Preparations with a basis of tea or mate | | 2101 30 19 | Roasted coffee substitutes excluding roasted chicory | | 2101 30 99 | Extracts, essences and concentrates of roasted coffee substitutes excluding those of roasted chicory | | 2102 10 31 2102 10 39 | Bakers' yeasts | | 2105 00 | Ice cream and other edible ice, whether or not containing cocoa | | ex 2106 | Food preparations not elsewhere specified or included other than those falling within CN codes 2106 10 20, 2106 90 20 and 2106 90 92 and other than flavoured or coloured sugar syrups falling within CN codes 2106 90 30 to 2106 90 59 | | 2202 90 91 | Non-alcoholic beverages, not including fruit or | | 2202 90 95 | vegetable juices of CN code 2009, containing | | 2202 90 99 | products of CN codes 0401 to 0404 or fat obtained from products of CN codes 0401 to 0404 | | 2905 43 00 | Mannitol | | 2905 44 | D-Glucitol (sorbitol) | | ex 3501 | Caseins, caseinates and other casein derivatives | | ex 3505 10 3505 20 | Dextrins and other modified starches, excluding esterified and etherified starches of CN code 3505 10 50 Glues based on starches or on dextrins or other modified starches | | 3809 | Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included: | | 3809 10 | - With a basis of amylaceous substances | | 3824 60 | Sorbitol other than that of subheading 2905 44 | Annex II **LIST OF PRODUCTS REFERRED TO IN ARTICLES 10(2) AND 11(2)** | CN code | Description | | --- | --- | | 0403 | Buttermilk, curdled milk and cream, yogurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa: | | 0403 10 51 to | - - Yoghurt, flavoured or containing added | | 0403 10 99 | fruit, nuts or cocoa | | 0403 90 71 to | - - Other, flavoured or containing added fruit, | | 0403 90 99 | nuts or cocoa | | 0405 | Butter and other fats and oils derived from milk; dairy spreads: | | 0405 20 | - Dairy spreads: | | 0405 20 10 | - - Of a fat content, by weight, of 39% or more, but less than 60% | | 0405 20 30 | - - Of a fat content, by weight, of 60% or more, but not exceeding 75% | | 0710 40 00 | Sweetcorn (uncooked or cooked by steaming or boiling in water), frozen | | 0711 90 30 | Sweetcorn provisionally preserved (for example, by sulphur dioxide gas, in brine, in sulphur water or in other preservative solution), but unsuitable in that state for immediate consumption | | ex 1517 | Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this chapter, other than edible fats or oils or their fractions of heading heading No. 1516: | | 1517 10 10 | - Margarine, excluding liquid margarine, containing more than 10% but not more than 15% by weight of milk fats | | 1517 90 10 | - Other, containing more than 10% but not more than 15% by weight of milk fats | | 1520 00 00 | Glycerol, crude; glycerol waters and glycerol lyes | | 1702 50 00 | Chemically pure fructose | | 1704 | Sugar confectionery (including white chocolate), not containing cocoa | | 1803 | Cocoa paste, whether or not defatted | | 1805 | Cocoa powder, not containing added sugar or other sweetening matter | | 1806 | Chocolate and other food preparation containing cocoa | | 1901 | Malt extract; food preparations of flour, meal, starch or malt extract, not containing cocoa powder or containing less than 40% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of heading Nos. 0401 to 0404, not containing cocoa powder or containing less than 5% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included | | ex 1902 | Pasta, excluding stuffed pasta falling within CN codes 1902 20 10 and 1902 20 30; couscous, whether or not prepared | | 1903 00 00 | Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or similar forms | | 1904 | Prepared food obtained by the swelling or roasting of cereals or cereal products (for example cornflakes); cereals (other than maize (corn)), in grain form, or in the form of flakes or other worked grains (except flour and meal), precooked, or otherwise prepared, not elsewhere specified or included | | 1905 | Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products | | 2001 90 30 | Sweetcorn (Zea mays var. saccharata), prepared or preserved by vinegar or acetic acid | | 2001 90 40 | Yams, sweet potatoes and similar edible parts of plants containing 5% or more by weight of starch, prepared or preserved by vinegar or acetic acid | | 2004 10 91 | Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid, frozen | | 2004 90 10 | Sweetcorn (Zea mays var. saccharata), prepared or preserved otherwise than by vinegar or acetic acid, frozen | | 2005 20 10 | Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid, not frozen | | 2005 80 00 | Sweetcorn (Zea mays var. saccharata), prepared or preserved otherwise than by vinegar or acetic acid, not frozen | | 2008 99 85 | Maize (corn), other than sweet corn (Zea mays var. saccharata) otherwise prepared or preserved, not containing added spirit or added sugar | | 2008 99 91 | Yams, sweet potatoes and similar edible parts of plants, containing 5% or more by weight of starch, otherwise prepared or preserved, not containing added spirit or added sugar | | 2101 12 98 | Preparations with a basis of coffee | | 2101 20 98 | Preparations with a basis of tea or mate | | 2101 30 19 | Roasted coffee substitutes excluding roasted chicory | | 2101 30 99 | Extracts, essences and concentrates of roasted coffee substitutes excluding those of roasted chicory | | 2105 | Ice cream and other edible ice, whether or not containing cocoa | | 2106 | Food preparations not elsewhere specified or included | | 2202 90 91 | Non-alcoholic beverages, not including fruit or | | 2202 90 95 | vegetable juices of CN code 2009, containing | | 2202 90 99 | products of CN codes 0401 to 0404 or fat obtained from products of CN codes 0401 to 0404 | | 2208 | Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80% vol; spirits, liqueurs and other spirituous beverages | | 2905 43 00 | Mannitol | | 2905 44 | D-Glucitol (sorbitol) | | ex 3501 | Caseins, caseinates and other casein derivates | | ex 3505 10 3505 20 | Dextrins and other modified starches, excluding esterified and etherified starches of CN code 3505 10 50 Glues based on starches or on dextrins or other modified starches | | 3809 | Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included: | | 3809 10 | - With a basis of amylaceous substances | | 3824 | Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: | | 3824 60 | - Sorbitol other than that of subheading 2905 44 | Annex III **LISTS OF INDUSTRIAL PRODUCTS ORIGINATING** **IN THE COMMUNITY TO WHICH IS APPLICABLE, ON IMPORTATION** **INTO JORDAN, THE SCHEDULE FOR TARIFF DISMANTLING** **REFERRED TO IN ARTICLE 11(3) AND (4)** 0501 00 000 2513 20 100 2702 20 000 2812 10 300 2827 38 000 0502 10 000 2514 00 000 2703 00 000 2812 10 400 2827 39 000 0502 90 000 2519 10 000 2704 00 000 2812 10 500 2827 41 900 0503 00 000 2519 90 000 2705 00 000 2812 10 600 2827 49 900 0505 10 000 2520 20 100 2706 00 000 2812 10 700 2829 11 000 0505 90 000 2524 00 000 2707 10 000 2812 10 800 2829 19 000 0506 10 000 2526 10 000 2707 20 000 2812 10 900 2829 90 100 0506 90 000 2526 20 000 2707 30 000 2812 90 000 2830 10 000 0507 10 000 2528 10 000 2707 40 000 2813 10 000 2830 20 000 0507 90 000 2528 90 000 2707 50 000 2813 90 000 2830 30 000 0508 00 000 2530 90 200 2707 60 000 2815 20 000 2830 90 000 1302 32 100 2530 90 300 2707 91 000 2815 30 000 2833 11 000 1401 10 000 2601 11 000 2707 99 000 2816 10 000 2833 19 000 1401 20 000 2601 12 000 2708 10 000 2816 20 000 2833 21 000 1401 90 000 2601 20 000 2708 20 000 2816 30 000 2833 22 000 1402 10 000 2602 00 000 2709 00 000 2817 00 000 2833 23 000 1402 90 000 2603 00 000 2710 00 520 2818 10 000 2833 24 000 1403 10 000 2604 00 000 2710 00 700 2818 20 000 2833 25 000 1403 90 000 2605 00 000 2712 20 100 2818 30 000 2833 26 000 1404 10 900 2606 00 000 2713 11 000 2819 90 100 2833 27 000 1404 20 000 2607 00 000 2713 12 000 2820 10 000 2833 29 000 1404 90 100 2608 00 000 2713 20 000 2821 10 100 2833 30 000 1520 00 100 2609 00 000 2713 90 000 2821 20 100 2833 40 000 1521 90 900 2610 00 000 2714 10 000 2822 00 100 2834 21 000 1804 00 000 2611 00 000 2714 90 000 2823 00 000 2834 29 100 1805 00 100 2612 10 000 2801 30 000 2824 10 000 2835 10 100 1901 10 100 2612 20 000 2802 00 000 2824 20 000 2835 22 100 1901 10 200 2613 10 000 2803 00 000 2824 90 000 2835 23 100 1901 90 200 2613 90 000 2804 29 100 2825 10 000 2835 24 100 2106 10 100 2614 00 000 2804 29 200 2825 20 000 2835 25 100 2106 90 300 2615 10 000 2804 70 000 2825 30 000 2835 26 100 2106 90 400 2615 90 000 2804 90 000 2825 40 000 2835 29 100 2106 90 600 2616 10 000 2805 11 000 2825 50 000 2835 31 100 2503 00 000 2616 90 000 2805 19 000 2825 60 000 2835 39 100 2504 10 000 2617 10 000 2805 21 000 2825 70 000 2836 10 100 2504 90 000 2617 90 000 2805 22 000 2825 80 000 2836 20 100 2507 00 000 2618 00 000 2805 30 000 2825 90 900 2836 30 100 2508 10 000 2619 00 000 2805 40 000 2826 11 000 2836 40 100 2508 20 000 2620 11 000 2806 20 000 2826 12 000 2836 50 100 2508 30 000 2620 19 000 2807 00 000 2826 19 000 2836 60 100 2508 40 000 2620 20 000 2808 00 000 2826 20 000 2836 70 100 2508 50 000 2620 30 000 2809 10 000 2826 30 000 2836 91 100 2508 60 000 2620 40 000 2809 20 000 2826 90 000 2836 92 100 2508 70 000 2620 50 000 2810 00 000 2827 10 000 2836 99 100 2509 00 000 2620 90 000 2811 11 000 2827 20 000 2839 11 000 2510 10 000 2621 00 000 2811 19 100 2827 31 000 2839 19 000 2510 20 000 2701 11 000 2811 19 900 2827 32 000 2839 20 000 2511 10 000 2701 12 000 2811 22 000 2827 33 000 2839 90 000 2511 20 000 2701 19 000 2811 29 000 2827 34 000 2840 11 000 2512 00 000 2701 20 000 2812 10 100 2827 35 000 2840 19 000 2513 19 000 2702 10 000 2812 10 200 2827 36 000 2840 20 000 2840 30 000 2905 39 100 2915 31 100 2921 30 100 2936 25 100 2841 90 100 2905 41 100 2915 32 100 2921 41 000 2936 26 100 2841 90 200 2905 42 100 2915 33 100 2921 42 000 2936 27 100 2844 10 000 2905 43 100 2915 34 100 2921 43 100 2936 28 100 2844 20 000 2905 44 100 2915 35 100 2921 44 100 2936 29 100 2844 30 000 2905 45 100 2915 39 100 2921 45 100 2936 90 100 2844 40 000 2905 49 100 2915 40 100 2921 49 920 2939 21 000 2844 50 000 2905 50 200 2915 50 100 2921 51 100 2939 29 100 2845 10 000 2906 29 100 2915 60 100 2921 59 100 2941 10 000 2845 90 000 2907 29 100 2915 70 100 2922 29 100 2941 20 000 2846 10 000 2908 10 000 2915 90 100 2924 21 110 2941 30 000 2846 90 000 2908 20 000 2916 11 100 2924 21 920 2941 40 000 2847 00 000 2908 90 000 2916 12 100 2925 11 100 2941 50 000 2849 10 000 2909 11 000 2916 13 100 2926 90 300 2911 90 000 2849 20 000 2909 19 100 2916 14 100 2927 00 100 3003 31 000 2849 90 000 2909 20 100 2916 15 100 2928 00 100 3003 39 000 2901 10 100 2909 30 100 2916 19 100 2929 10 000 3003 40 000 2901 21 100 2909 41 100 2916 20 100 2929 90 100 3003 90 000 2901 22 100 2909 42 100 2916 31 100 2929 90 200 3004 31 000 2901 23 100 2909 43 100 2916 32 100 2929 90 900 3004 32 000 2901 24 100 2909 44 100 2916 34 100 2930 10 100 3004 39 000 2901 29 100 2909 49 100 2916 35 100 2930 20 100 3004 40 000 2902 11 100 2909 50 100 2916 39 100 2930 30 100 3004 50 000 2902 19 100 2909 60 100 2917 11 910 2930 40 100 3004 90 000 2902 20 100 2912 11 100 2917 12 910 2930 90 100 3006 60 000 2902 30 100 2912 12 100 2917 13 910 2932 11 100 3101 00 000 2902 41 100 2912 13 100 2917 14 100 2932 12 100 3102 10 000 2902 42 100 2912 19 100 2917 19 910 2932 13 100 3102 21 000 2902 43 100 2912 21 100 2917 20 910 2932 19 100 3102 29 000 2902 44 100 2912 29 100 2917 31 910 2932 21 100 3102 30 000 2902 50 100 2912 30 100 2917 32 910 2932 29 100 3102 40 000 2902 60 100 2912 41 100 2917 33 910 2932 91 100 3102 50 000 2902 70 100 2912 42 100 2917 34 910 2932 92 100 3102 60 000 2902 90 100 2912 49 100 2917 35 100 2932 93 100 3102 70 000 2902 90 910 2912 50 100 2917 36 910 2932 94 100 3102 80 000 2903 22 000 2912 60 100 2917 37 910 2932 99 200 3102 90 000 2903 41 000 2914 11 100 2917 39 910 2933 11 100 3103 10 000 2903 42 000 2914 12 100 2918 11 100 2933 19 100 3103 20 000 2903 44 000 2914 13 100 2918 12 100 2933 29 100 3103 90 000 2903 45 100 2914 19 100 2918 13 100 2933 31 100 3104 10 000 2903 46 100 2914 21 100 2918 15 100 2933 32 100 3104 20 000 2903 47 100 2914 22 100 2918 16 100 2933 39 300 3104 30 900 2903 49 100 2914 23 100 2918 17 100 2933 40 200 3104 90 900 2903 62 100 2914 29 100 2918 19 200 2933 51 100 3105 10 900 2904 10 100 2914 31 100 2918 21 100 2933 59 500 3105 20 000 2904 20 100 2914 39 100 2918 22 100 2933 61 100 3105 30 000 2904 90 200 2914 40 100 2918 23 100 2933 69 100 3105 40 000 2905 11 100 2914 50 100 2918 29 100 2933 71 100 3105 51 000 2905 12 100 2914 61 100 2918 30 100 2933 79 300 3105 59 000 2905 13 100 2914 69 100 2918 90 100 2933 90 100 3105 60 000 2905 14 100 2914 70 100 2919 00 100 2934 10 100 3105 90 000 2905 15 100 2915 11 100 2920 10 100 2934 20 100 3201 10 100 2905 16 100 2915 12 100 2920 90 500 2934 30 100 3201 20 100 2905 17 100 2915 13 100 2921 11 100 2934 90 910 3201 90 100 2905 19 200 2915 21 100 2921 12 100 2936 10 100 3203 00 100 2905 22 100 2915 22 100 2921 19 500 2936 21 100 3203 00 910 2905 29 100 2915 23 100 2921 21 100 2936 22 100 3204 11 100 2905 31 100 2915 24 100 2921 22 100 2936 23 100 3204 12 100 2905 32 100 2915 29 100 2921 29 100 2936 24 100 3204 13 100 3204 14 100 3802 10 000 3904 40 900 3920 62 100 4008 19 100 3204 15 100 3802 90 000 3904 50 900 3920 63 100 4008 21 200 3204 16 100 3806 30 210 3904 61 000 3920 69 100 4009 10 100 3204 17 100 3806 90 210 3904 69 000 3920 72 100 4009 20 100 3204 19 100 3808 10 900 3904 90 000 3920 73 910 4009 30 100 3204 20 100 3808 20 900 3905 12 000 3920 79 910 4009 40 100 3204 90 100 3808 30 900 3905 19 000 3920 92 100 4009 50 100 3205 00 000 3808 40 900 3905 21 000 3920 93 100 4012 20 100 3206 11 100 3808 90 900 3905 29 000 3920 94 100 4016 10 100 3206 19 100 3809 10 100 3905 30 000 3920 99 910 4016 99 100 3206 20 100 3809 91 100 3905 91 000 3921 19 200 4016 99 200 3206 30 100 3809 92 100 3905 99 000 3921 90 110 4017 00 100 3206 41 100 3809 93 100 3906 10 000 3921 90 910 4017 00 400 3206 42 100 3812 10 000 3906 90 000 3923 21 100 4017 00 500 3260 43 100 3812 20 000 3907 10 000 3923 29 100 4101 10 000 3206 49 100 3812 30 000 3907 20 000 3923 40 100 4101 21 000 3206 50 100 3813 00 000 3907 30 000 3926 90 100 4101 22 000 3207 10 100 3815 11 100 3907 40 000 3926 90 200 4101 29 000 3207 20 100 3815 12 100 3907 60 000 3926 90 400 4101 30 000 3207 30 100 3815 19 100 3907 91 000 3926 90 600 4101 40 000 3207 40 100 3815 90 100 3907 99 000 4001 10 000 4102 10 000 3208 10 300 3816 00 100 3908 10 000 4001 21 000 4102 21 000 3208 20 300 3817 10 100 3908 90 000 4001 22 000 4102 29 000 3208 90 300 3817 20 100 3909 10 000 4001 29 100 4103 10 000 3209 10 100 3818 00 100 3909 20 000 4001 30 900 4103 20 000 3209 90 100 3821 00 000 3909 30 000 4002 11 900 4103 90 000 3210 00 100 3822 00 000 3909 40 000 4002 19 110 4301 10 000 3211 00 100 3823 11 000 3909 50 000 4002 19 900 4301 20 000 3212 10 000 3823 12 000 3910 00 000 4002 20 110 4301 30 000 3215 11 000 3823 13 000 3911 10 000 4002 20 900 4301 40 000 3215 19 000 3823 19 000 3911 90 000 4002 31 110 4301 50 000 3215 90 000 3823 70 000 3912 11 000 4002 31 900 4301 60 000 3402 11 100 3824 10 100 3912 12 000 4002 39 110 4301 70 000 3402 12 100 3824 20 100 3912 20 000 4002 39 900 4301 80 000 3402 13 100 3824 30 100 3912 31 000 4002 41 900 4301 90 000 3402 19 100 3824 40 100 3912 39 000 4002 49 110 4401 10 000 3402 90 100 3824 50 100 3912 90 000 4002 49 900 4401 30 000 3505 10 100 3824 60 100 3913 10 000 4002 51 900 4402 00 000 3505 10 200 3824 71 100 3913 90 000 4002 59 110 4403 20 100 3505 20 100 3824 79 100 3914 00 000 4002 59 900 4403 41 100 3507 10 100 3824 90 100 3915 10 000 4002 60 110 4403 49 100 3507 10 900 3824 90 200 3915 20 000 4002 60 900 4403 91 100 3507 90 000 3901 10 000 3915 30 000 4002 70 110 4403 92 100 3601 00 000 3901 20 000 3915 90 000 4002 70 900 4403 99 100 3603 00 000 3901 30 000 3916 10 100 4002 80 110 4405 00 000 3701 10 000 3901 90 000 3916 10 910 4002 80 900 4406 10 000 3701 30 100 3902 10 000 3916 20 100 4002 91 900 4406 90 000 3701 99 100 3902 20 000 3916 20 910 4002 99 110 4415 10 100 3702 10 000 3902 30 000 3916 90 100 4002 99 900 4415 10 200 3705 10 100 3902 90 000 3916 90 910 4003 00 000 4415 10 300 3705 20 100 3903 11 000 3919 90 100 4004 00 000 4415 20 100 3705 90 100 3903 19 000 3920 10 910 4005 10 100 4417 00 100 3706 10 100 3903 20 000 3920 20 910 4005 91 100 4421 90 100 3706 90 100 3903 30 000 3920 30 100 4005 99 110 4421 90 200 3801 10 000 3903 90 000 3920 41 100 4005 99 900 4421 90 300 3801 20 100 3904 10 900 3920 42 100 4006 10 000 4502 00 100 3801 20 210 3904 21 900 3920 51 100 4006 90 100 4503 10 000 3801 30 100 3904 22 900 3920 59 100 4007 00 100 4503 90 100 3801 90 100 3904 30 900 3920 61 100 4008 11 100 4504 10 100 4504 90 100 4823 90 700 5205 27 000 5402 32 000 5509 61 000 4504 90 200 4823 90 800 5205 28 000 5402 33 000 5509 62 000 4601 10 000 4823 90 910 5205 31 000 5402 39 000 5509 69 000 4602 10 100 4903 00 000 5205 32 000 5402 41 000 5509 91 000 4602 90 100 4904 00 000 5205 33 000 5402 42 000 5509 92 000 4701 00 000 4905 10 000 5205 34 000 5402 43 000 5509 99 000 4702 00 000 4905 91 000 5205 35 000 5402 49 000 5510 11 000 4703 11 000 4905 99 000 5205 41 000 5402 51 000 5510 12 000 4703 19 000 4906 00 000 5205 42 000 5402 52 000 5510 20 000 4703 21 000 4907 00 900 5205 43 000 5402 59 000 5510 30 000 4703 29 000 4911 10 000 5205 44 000 5402 61 000 5510 90 000 4704 11 000 4911 99 100 5205 46 000 5402 62 000 5603 11 100 4704 19 000 5001 00 000 5205 47 000 5402 69 000 5603 12 100 4704 21 000 5002 00 000 5205 48 000 5403 10 000 5603 13 100 4704 29 000 5003 10 000 5206 11 000 5403 20 000 5603 14 100 4705 00 000 5003 90 000 5206 12 000 5403 31 000 5603 91 100 4706 10 000 5004 00 000 5206 13 000 5403 32 000 5603 92 100 4706 20 000 5005 00 000 5206 14 000 5403 33 000 5603 93 100 4706 91 000 5101 11 000 5206 15 000 5403 39 000 5603 94 100 4706 92 000 5101 19 000 5206 21 000 5403 41 000 5604 10 100 4706 93 000 5101 21 000 5206 22 000 5403 42 000 5604 20 910 4707 10 000 5101 29 000 5206 23 000 5403 49 000 5604 90 100 4707 20 000 5101 30 000 5206 24 000 5404 10 000 5604 90 910 4707 30 000 5102 10 000 5206 25 000 5404 90 900 5605 00 900 4707 90 000 5102 20 000 5206 31 000 5405 00 900 5607 10 000 4802 51 100 5103 10 000 5206 32 000 5407 20 100 5607 29 000 4802 52 100 5103 20 000 5206 33 000 5407 91 100 5607 30 000 4802 53 100 5103 30 000 5206 34 000 5501 10 000 5607 90 000 4802 60 100 5104 00 000 5206 35 000 5501 20 000 5803 10 100 4804 11 300 5105 10 000 5206 41 000 5501 30 000 5803 90 100 4804 19 300 5105 21 000 5206 42 000 5501 90 000 5806 31 100 4804 21 000 5105 29 000 5206 43 000 5502 00 000 5806 32 100 4804 29 000 5105 30 000 5206 44 000 5503 10 000 5806 39 100 4804 31 300 5105 40 000 5206 45 000 5503 20 000 5903 10 100 4804 39 300 5106 10 000 5303 10 000 5503 30 000 5903 20 100 4804 41 300 5106 20 000 5303 90 000 5503 40 000 5903 90 100 4804 42 300 5107 10 000 5304 10 000 5503 90 000 5911 31 000 4804 49 300 5107 20 000 5304 90 000 5504 10 000 5911 32 000 4804 51 300 5108 10 000 5305 11 000 5504 90 000 5911 40 100 4804 51 400 5108 20 000 5305 19 000 5505 10 000 5911 90 100 4804 52 300 5110 00 900 5305 21 000 5505 20 000 6115 11 100 4804 59 300 5113 00 100 5305 29 000 5506 10 100 6115 12 100 4808 20 000 5201 00 000 5305 91 000 5506 20 100 6115 19 100 4810 39 100 5202 10 000 5305 99 000 5506 30 100 6115 20 100 4810 91 100 5202 91 000 5306 10 000 5507 00 100 6115 91 100 4810 99 100 5202 99 000 5306 20 000 5508 10 900 6115 92 100 4811 40 100 5203 00 000 5307 10 000 5508 20 900 6115 93 100 4811 40 200 5204 11 000 5307 20 000 5509 11 000 6115 99 100 4819 10 100 5204 19 000 5308 10 000 5509 12 000 6217 10 100 4819 20 200 5205 11 000 5308 20 000 5509 21 000 6305 10 100 4819 30 100 5205 12 000 5308 30 000 5509 22 000 6804 10 100 4819 40 100 5205 13 000 5308 90 000 5509 31 000 6804 23 100 4820 20 100 5205 14 000 5310 10 100 5509 32 000 6812 10 000 4822 10 000 5205 15 000 5310 90 100 5509 41 000 6812 20 000 4822 90 000 5205 21 000 5401 10 900 5509 42 000 6812 30 000 4823 90 100 5205 22 000 5401 20 900 5509 51 000 6812 50 100 4823 90 200 5205 23 000 5402 10 000 5509 52 000 6903 10 100 4823 90 500 5205 24 000 5402 20 000 5509 53 000 6903 10 200 4823 90 600 5205 26 000 5402 31 000 5509 59 000 6903 20 100 6903 20 200 7202 30 000 7219 35 100 7305 19 000 7606 12 100 6903 90 100 7202 41 000 7219 90 100 7305 20 000 7606 12 200 6903 90 200 7202 49 000 7220 11 100 7305 31 900 7606 91 100 6909 11 000 7202 50 000 7220 12 100 7305 39 900 7606 91 200 6909 12 000 7202 60 000 7220 20 100 7305 90 900 7606 91 300 6909 19 000 7202 70 000 7220 90 100 7306 10 100 7606 92 100 7001 00 000 7202 80 000 7221 00 100 7306 10 400 7606 92 200 7002 10 900 7202 91 000 7222 11 100 7306 20 100 7607 11 100 7002 20 900 7202 92 000 7222 19 100 7306 20 400 7607 19 100 7002 31 900 7202 93 000 7222 20 100 7306 30 200 7607 20 100 7002 32 900 7202 99 000 7222 30 100 7306 40 200 7612 90 100 7002 39 900 7204 10 000 7223 00 100 7306 50 200 7612 90 200 7010 20 000 7204 21 000 7224 10 100 7306 90 100 7612 90 300 7010 91 900 7204 29 000 7224 90 100 7306 90 400 7613 00 000 7010 92 900 7204 30 000 7225 11 100 7308 90 100 7616 99 500 7010 93 900 7204 41 000 7225 19 100 7308 90 200 7801 10 900 7010 94 900 7204 49 000 7225 20 100 7310 21 110 7801 91 900 7011 10 000 7204 50 100 7225 30 100 7310 21 130 7801 99 900 7011 20 000 7205 10 000 7225 40 100 7310 29 110 7802 00 000 7011 90 000 7206 10 100 7225 50 100 7310 29 130 7806 00 100 7019 11 000 7207 11 100 7225 91 100 7311 00 000 7901 11 000 7019 12 000 7207 12 100 7225 92 100 7321 90 100 7901 12 000 7019 19 000 7207 19 100 7225 99 100 7326 19 400 7901 20 000 7019 31 100 7207 20 100 7226 11 100 7326 90 400 7902 00 000 7019 39 100 7208 40 100 7226 19 100 7401 10 000 7903 90 100 7101 10 000 7208 54 100 7226 20 100 7401 20 000 7905 00 100 7101 21 000 7208 90 100 7226 91 100 7402 00 000 7905 00 200 7101 22 000 7209 16 100 7226 92 100 7403 11 000 7907 00 200 7102 10 000 7209 17 100 7226 93 100 7403 12 000 8001 10 000 7102 21 000 7209 18 100 7226 94 100 7403 13 000 8001 20 000 7102 29 000 7209 26 100 7226 99 100 7403 19 000 8002 00 000 7102 31 000 7209 27 100 7227 10 100 7403 21 000 8007 00 100 7102 39 000 7209 28 100 7227 20 100 7403 22 000 8007 00 200 7103 10 000 7209 90 100 7227 90 100 7403 23 000 8101 91 000 7103 91 000 7210 11 100 7228 10 100 7403 29 000 8102 91 000 7103 99 000 7210 12 100 7228 20 100 7404 00 000 8103 10 100 7104 10 000 7210 30 100 7228 30 100 7405 00 900 8104 11 000 7104 20 000 7210 41 100 7228 40 100 7409 11 100 8104 19 000 7104 90 000 7210 49 100 7228 50 100 7409 21 100 8104 20 000 7105 10 000 7210 50 100 7228 60 100 7409 31 100 8105 10 100 7105 90 000 7210 61 100 7228 70 100 7409 40 100 8105 10 200 7106 91 000 7210 69 100 7228 80 100 7409 90 100 8106 00 100 7110 11 100 7210 70 100 7229 10 100 7411 10 100 8107 10 100 7110 21 100 7210 90 100 7229 20 100 7411 21 100 8108 10 100 7110 31 100 7218 10 100 7302 10 000 7411 22 100 8109 10 100 7110 41 100 7218 91 100 7302 20 000 7411 29 100 8110 00 100 7112 10 000 7218 99 100 7302 30 000 7417 00 100 8111 00 100 7112 20 000 7219 11 100 7302 40 000 7419 99 500 8112 20 100 7112 90 000 7219 12 100 7302 90 000 7501 10 000 8112 30 100 7113 19 100 7219 13 100 7304 10 100 7501 20 000 8112 40 100 7118 10 000 7219 14 100 7304 29 100 7502 10 000 8112 91 100 7118 90 000 7219 21 100 7304 31 910 7502 20 000 8113 00 100 7201 10 000 7219 22 100 7304 39 910 7503 00 000 8201 50 100 7201 20 000 7219 23 100 7304 41 910 7601 10 000 8201 90 900 7201 50 000 7219 24 100 7304 49 910 7601 20 000 8202 10 000 7202 11 000 7219 31 100 7304 51 910 7602 00 000 8202 20 000 7202 19 000 7219 32 100 7304 59 910 7606 11 100 8202 40 000 7202 21 000 7219 33 100 7305 11 000 7606 11 200 8203 10 000 7202 29 000 7219 34 100 7305 12 000 7606 11 300 8203 20 000 8203 30 000 8421 22 900 8462 99 900 8507 90 000 8711 30 100 8203 40 000 8421 91 100 8466 10 000 8508 90 000 8711 40 100 8204 11 000 8421 99 100 8466 20 000 8514 90 000 8711 50 100 8204 12 000 8421 99 200 8466 30 000 8515 80 100 8711 90 100 8204 20 000 8422 90 900 8466 91 000 8515 80 990 8713 10 000 8205 10 000 8423 20 000 8466 92 000 8515 90 000 8713 90 000 8205 20 000 8423 30 000 8466 93 000 8523 11 100 8716 39 900 8205 30 000 8423 82 900 8466 94 000 8523 12 100 8716 40 900 8205 40 000 8423 89 900 8468 80 900 8523 13 100 8716 90 100 8205 59 000 8424 30 900 8468 90 900 8523 90 100 8801 10 000 8205 60 000 8424 90 100 8474 90 900 8524 32 100 8801 90 000 8205 70 000 8424 90 200 8475 90 000 8524 39 100 8803 10 000 8205 80 000 8425 20 000 8477 10 900 8524 51 100 8803 20 000 8205 90 900 8425 31 100 8477 20 900 8524 52 100 8803 30 000 8207 13 000 8425 39 100 8477 30 900 8524 53 100 8803 90 000 8207 19 000 8425 41 000 8477 40 900 8524 99 100 8804 00 000 8207 20 900 8425 49 000 8477 51 900 8524 99 200 8805 10 000 8207 30 900 8426 12 100 8477 59 900 8526 10 000 8903 10 000 8207 40 900 8426 12 990 8477 80 900 8526 91 000 8903 91 000 8207 50 000 8426 19 100 8477 90 100 8526 92 000 8903 92 000 8207 60 000 8426 19 990 8478 10 900 8530 90 000 8903 99 000 8207 70 000 8426 41 100 8478 90 100 8532 10 000 8908 00 000 8207 80 000 8426 41 990 8480 10 900 8532 21 000 9003 90 100 8207 90 000 8426 49 900 8480 20 900 8532 22 000 9011 10 000 8208 10 000 8426 91 000 8480 30 900 8532 23 000 9011 20 000 8208 20 000 8426 99 900 8480 41 900 8532 24 000 9011 80 000 8208 40 000 8427 10 000 8480 49 900 8532 25 000 9012 10 000 8208 90 000 8427 20 000 8480 50 900 8532 29 000 9015 10 000 8211 92 100 8427 90 000 8480 60 900 8532 30 000 9015 20 000 8211 93 100 8428 10 900 8480 71 900 8532 90 000 9015 30 000 8301 40 100 8428 20 000 8480 79 900 8543 19 900 9015 40 000 8301 50 100 8428 31 000 8481 40 000 8543 30 900 9015 80 000 8308 10 000 8428 32 900 8481 80 100 8543 89 200 9017 20 000 8308 90 100 8428 33 900 8481 80 200 8543 90 100 9017 30 900 8309 90 200 8428 39 900 8481 80 310 8544 11 200 9017 80 900 8407 10 100 8428 50 000 8483 10 100 8544 19 200 9022 90 000 8407 10 200 8428 60 000 8483 20 100 8544 59 200 9024 10 900 8408 10 100 8428 90 900 8483 30 100 8544 60 200 9024 80 900 8408 10 200 8430 10 100 8483 40 100 8545 11 100 9024 90 900 8411 12 900 8433 90 000 8483 50 100 8545 19 200 9025 19 100 8411 22 900 8434 90 000 8483 60 100 8607 11 000 9025 80 100 8411 82 900 8435 90 000 8483 90 100 8607 12 000 9025 90 100 8411 91 100 8436 91 000 8501 10 110 8607 19 000 9026 90 200 8411 99 100 8436 99 000 8501 10 900 8607 21 000 9027 10 900 8412 90 100 8437 90 000 8501 20 110 8607 29 000 9027 20 900 8414 10 000 8438 90 000 8501 31 110 8607 30 000 9027 30 900 8414 90 100 8439 91 000 8501 32 110 8607 91 000 9027 40 100 8414 90 200 8439 99 000 8501 40 110 8607 99 000 9027 90 910 8416 30 900 8440 90 000 8501 51 110 8705 10 000 9029 10 110 8416 90 800 8441 90 900 8501 52 110 8705 90 200 9029 20 110 8417 20 000 8443 90 000 8502 11 100 8705 90 900 9030 10 900 8417 80 900 8451 50 900 8502 20 100 8706 00 100 9030 20 900 8417 90 100 8451 90 100 8502 39 100 8707 90 100 9030 31 900 8418 99 100 8452 10 000 8502 40 100 8708 99 100 9030 39 900 8419 11 900 8453 90 000 8504 21 100 8709 11 000 9030 40 900 8419 32 900 8454 90 000 8504 31 100 8709 19 000 9030 82 900 8419 60 900 8455 90 000 8504 31 900 8710 00 000 9030 89 900 8419 90 110 8456 99 990 8504 90 100 8711 10 100 9030 90 900 8419 90 910 8462 91 900 8506 90 100 8711 20 100 9031 10 900 9031 20 900 9306 30 300 9602 00 100 9606 29 000 9608 10 100 9031 30 000 9306 30 400 9603 90 200 9606 30 000 9608 99 100 9031 80 900 9405 40 100 9606 10 000 9607 11 000 9609 10 100 9032 90 200 9405 50 100 9606 21 000 9607 19 000 9616 10 000 9306 21 100 9406 00 110 9606 22 000 9607 20 000 9705 00 100 9306 30 100 0509 00 000 1902 40 000 2515 11 900 2710 00 400 2831 10 000 0510 00 000 1903 00 000 2515 12 100 2710 00 510 2831 90 000 0903 00 000 1904 10 000 2515 12 900 2710 00 600 2832 10 000 1301 10 000 1904 20 000 2515 20 000 2710 00 900 2832 20 000 1301 20 100 1904 90 000 2516 11 100 2711 11 000 2832 30 000 1301 20 900 1905 10 000 2516 11 900 2711 12 000 2834 10 000 1301 90 100 1905 20 000 2516 12 100 2711 13 000 2834 22 000 1301 90 900 1905 30 100 2516 12 900 2711 14 000 2834 29 900 1302 11 100 1905 30 900 2516 21 000 2711 19 000 2835 10 900 1302 11 200 1905 40 000 2516 22 000 2711 21 000 2835 22 900 1302 12 000 1905 90 100 2516 90 000 2711 29 000 2835 23 900 1302 13 100 1905 90 210 2517 10 000 2712 10 000 2835 24 900 1302 13 900 1905 90 290 2517 20 000 2712 20 900 2835 25 900 1302 14 000 1905 90 900 2517 30 000 2712 90 000 2835 26 900 1302 19 000 2101 11 000 2517 41 000 2715 00 000 2835 29 900 1302 31 100 2101 12 000 2517 49 000 2801 10 000 2835 31 900 1302 31 900 2101 20 000 2518 10 000 2801 20 000 2835 39 900 1302 32 900 2101 30 000 2518 20 000 2804 10 000 2836 10 900 1302 39 100 2102 10 000 2518 30 000 2804 21 000 2836 20 900 1302 39 900 2102 20 000 2520 10 000 2804 29 900 2836 30 900 1404 10 100 2102 30 000 2520 20 900 2804 30 000 2836 40 900 1404 90 900 2103 10 000 2521 00 000 2804 40 000 2836 50 900 1505 10 000 2103 30 100 2522 10 000 2804 50 000 2836 60 900 1505 90 100 2103 30 200 2522 20 000 2804 61 000 2836 70 900 1505 90 900 2103 90 000 2522 30 000 2804 69 000 2836 91 900 1520 00 900 2104 10 000 2523 10 000 2804 80 000 2836 92 900 1521 10 000 2104 20 000 2523 21 000 2806 10 000 2836 99 900 1521 90 100 2105 00 000 2523 29 000 2811 21 000 2837 11 000 1704 10 000 2106 10 900 2523 30 000 2811 23 000 2837 19 100 1704 90 000 2106 90 100 2523 90 000 2814 10 000 2837 19 900 1803 10 000 2106 90 200 2525 10 000 2814 20 000 2837 20 000 1803 20 000 2106 90 700 2525 20 000 2815 11 000 2838 00 000 1805 00 900 2106 90 800 2525 30 000 2815 12 000 2841 10 000 1806 10 000 2106 90 900 2527 00 000 2819 10 000 2841 20 000 1806 20 000 2201 10 000 2529 10 000 2819 90 900 2841 30 000 1806 31 000 2201 90 000 2529 21 000 2820 90 000 2841 40 000 1806 32 000 2202 10 000 2529 22 000 2821 10 900 2841 50 000 1806 90 000 2202 90 000 2529 30 000 2821 20 900 2841 61 000 1901 10 900 2501 00 000 2530 10 000 2822 00 900 2841 69 000 1901 20 000 2502 00 000 2530 20 000 2825 90 100 2841 70 000 1901 90 100 2505 10 000 2530 40 000 2827 41 100 2841 80 000 1901 90 900 2505 90 000 2530 90 100 2827 49 100 2841 90 900 1902 11 100 2506 10 000 2530 90 900 2827 51 000 2842 10 000 1902 11 900 2506 21 000 2710 00 100 2827 59 000 2842 90 000 1902 19 100 2506 29 000 2710 00 200 2827 60 000 2843 10 000 1902 19 900 2513 11 000 2710 00 310 2828 10 000 2843 21 000 1902 20 000 2513 20 900 2710 00 320 2828 90 000 2843 29 000 1902 30 000 2515 11 100 2710 00 330 2829 90 900 2843 30 000 2843 90 000 2905 29 900 2914 12 900 2917 32 990 2921 59 900 2848 00 000 2905 31 900 2914 13 900 2917 33 100 2922 11 000 2850 00 000 2905 32 900 2914 19 900 2917 33 990 2922 12 000 2851 00 100 2905 39 900 2914 21 900 2917 34 100 2922 13 100 2851 00 900 2905 41 900 2914 22 900 2917 34 990 2922 13 900 2901 10 900 2905 42 900 2914 23 900 2917 35 900 2922 19 110 2901 21 900 2905 43 900 2914 29 900 2917 36 100 2922 19 120 2901 22 900 2905 44 900 2914 31 900 2917 36 990 2922 19 190 2901 23 900 2905 45 900 2914 39 900 2917 37 100 2922 19 200 2901 24 900 2905 49 900 2914 40 900 2917 37 990 2922 19 300 2901 29 900 2905 50 100 2914 50 900 2917 39 100 2922 19 400 2902 11 900 2905 50 900 2914 61 900 2917 39 990 2922 19 900 2902 19 900 2906 11 000 2914 69 900 2918 11 900 2922 21 000 2902 20 900 2906 12 000 2914 70 900 2918 12 900 2922 22 000 2902 30 900 2906 13 000 2915 11 900 2918 13 900 2922 29 900 2902 41 900 2906 14 000 2915 12 900 2918 14 000 2922 30 100 2902 42 900 2906 19 000 2915 13 900 2918 15 900 2922 30 200 2902 43 900 2906 21 000 2915 21 900 2918 16 900 2922 30 300 2902 44 900 2906 29 900 2915 22 900 2918 17 900 2922 30 900 2902 50 900 2907 11 000 2915 23 900 2918 19 100 2922 41 000 2902 60 900 2907 12 000 2915 24 900 2918 19 900 2922 42 000 2902 70 900 2907 13 000 2915 29 900 2919 21 900 2922 43 000 2902 90 990 2907 14 000 2915 31 900 2918 22 900 2922 49 100 2903 11 000 2907 15 000 2915 32 900 2918 23 900 2922 49 900 2903 12 000 2907 19 000 2915 33 900 2918 29 900 2922 50 000 2903 13 000 2907 21 000 2915 34 900 2918 30 900 2923 10 000 2903 14 000 2907 22 000 2915 35 900 2918 90 900 2923 20 000 2903 15 000 2907 23 000 2915 39 900 2919 00 900 2923 90 000 2903 16 000 2907 29 900 2915 40 900 2920 10 900 2924 10 100 2903 19 000 2907 30 000 2915 50 900 2920 90 100 2924 10 900 2903 21 000 2909 19 900 2915 60 900 2920 90 200 2924 21 190 2903 23 000 2909 20 900 2915 70 900 2920 90 300 2924 21 910 2903 29 000 2909 30 900 2915 90 900 2920 90 400 2924 21 990 2903 30 100 2909 41 900 2916 11 900 2920 90 900 2924 22 000 2903 30 900 2909 42 900 2916 12 900 2921 11 900 2924 29 100 2903 43 000 2909 43 900 2916 13 900 2921 12 900 2924 29 900 2903 45 900 2909 44 900 2916 14 900 2921 19 100 2925 11 900 2903 46 900 2909 49 900 2916 15 900 2921 19 200 2925 19 100 2903 47 900 2909 50 900 2916 19 900 2921 19 300 2925 19 900 2903 49 900 2909 60 900 2916 20 900 2921 19 400 2925 20 000 2903 51 000 2910 10 000 2916 31 900 2921 19 900 2926 10 000 2903 59 000 2910 20 000 2916 32 900 2921 21 900 2926 20 000 2903 61 000 2910 30 000 2916 34 900 2921 22 900 2926 90 100 2903 62 900 2910 90 000 2916 35 900 2921 29 900 2926 90 200 2903 69 000 2911 00 000 2916 39 900 2921 30 900 2926 90 900 2904 10 900 2912 11 900 2917 11 100 2921 43 900 2927 00 900 2904 20 900 2912 12 900 2917 11 990 2921 44 900 2928 00 900 2904 90 100 2912 13 900 2917 12 100 2921 45 900 2930 10 900 2904 90 900 2912 19 900 2917 12 990 2921 49 100 2930 20 900 2905 11 900 2912 21 900 2917 13 100 2921 49 200 2930 30 900 2905 12 900 2912 29 900 2917 13 990 2921 49 300 2930 40 900 2905 13 900 2912 30 900 2917 14 900 2921 49 400 2930 90 900 2905 14 900 2912 41 900 2917 19 100 2921 49 500 2931 00 000 2905 15 900 2912 42 900 2917 19 990 2921 49 600 2932 11 900 2905 16 900 2912 49 900 2917 20 100 2921 49 700 2932 12 900 2905 17 900 2912 50 900 2917 20 990 2921 49 800 2932 13 900 2905 19 100 2912 60 900 2917 31 100 2921 49 910 2932 19 900 2905 19 900 2913 00 000 2917 31 990 2921 49 990 2932 21 900 2905 22 900 2914 11 900 2917 32 100 2921 51 900 2932 29 900 2932 91 900 2939 41 000 3207 10 900 3307 90 100 3702 43 000 2932 92 900 2939 42 000 3207 20 900 3307 90 900 3702 44 000 2932 93 900 2939 49 100 3207 30 900 3401 11 000 3702 51 000 2932 94 900 2939 49 900 3207 40 900 3401 19 000 3702 52 000 2932 99 100 2939 50 100 3208 10 100 3401 20 000 3702 53 000 2932 99 900 2939 50 900 3208 10 900 3402 11 900 3702 54 000 2933 11 900 2939 61 000 3208 20 100 3402 12 900 3702 55 000 2933 19 900 2939 62 000 3208 20 900 3402 13 900 3702 56 000 2933 21 000 2939 63 000 3208 90 100 3402 19 900 3702 91 000 2933 29 900 2939 69 000 3208 90 900 3402 20 000 3702 92 000 2933 31 900 2939 70 000 3209 10 900 3402 90 900 3702 93 000 2933 32 900 2939 90 100 3209 90 900 3403 11 000 3702 94 000 2933 39 100 2939 90 200 3210 00 200 3403 19 000 3702 95 000 2933 39 200 2939 90 300 3210 00 900 3403 91 000 3703 10 000 2933 39 900 2939 90 400 3211 00 900 3403 99 000 3703 20 000 2933 40 100 2939 90 500 3212 90 100 3404 10 000 3703 90 000 2933 40 900 2939 90 900 3212 90 200 3404 20 000 3704 00 000 2933 51 900 2940 00 000 3212 90 900 3404 90 000 3705 10 900 2933 59 100 2942 00 000 3213 10 000 3405 10 000 3705 20 900 2933 59 200 3001 10 000 3213 90 000 3405 20 000 3705 90 900 2933 59 300 3001 20 000 3214 10 000 3405 30 000 3706 10 900 2933 59 400 3001 90 000 3214 90 000 3405 40 000 3706 90 900 2933 59 900 3005 10 000 3301 11 000 3405 90 000 3707 10 100 2933 61 900 3005 90 000 3301 12 000 3406 00 000 3707 10 900 2933 69 900 3006 10 000 3301 13 000 3407 00 100 3707 90 000 2933 71 900 3006 20 000 3301 14 000 3407 00 910 3801 20 290 2933 79 100 3006 30 000 3301 19 000 3407 00 920 3801 30 900 2933 79 200 3006 40 000 3301 21 000 3407 00 990 3801 90 900 2933 79 900 3006 50 000 3301 22 000 3501 10 000 3803 00 000 2933 90 900 3104 30 100 3301 23 000 3501 90 000 3804 00 000 2934 10 900 3104 90 100 3301 24 000 3502 11 000 3805 10 000 2934 20 900 3105 10 100 3301 25 000 3502 19 000 3805 20 000 2934 30 900 3105 10 200 3301 26 000 3502 20 000 3805 90 100 2934 90 100 3105 10 300 3301 29 000 3502 90 000 3805 90 900 2934 90 990 3101 10 900 3301 30 000 3503 00 100 3806 10 000 2935 00 000 3201 20 900 3301 90 100 3503 00 900 3806 20 000 2936 10 900 3201 90 900 3301 90 900 3504 00 000 3806 30 100 2936 21 900 3202 10 000 3302 10 100 3505 10 900 3806 30 290 2936 22 900 3202 90 000 3302 10 200 3505 20 900 3806 90 100 2936 23 900 3203 00 990 3302 10 900 3506 10 000 3806 90 290 2936 24 900 3204 11 900 3302 90 000 3506 91 000 3807 00 000 2936 25 900 3204 12 900 3303 00 000 3506 99 000 3808 10 100 2936 26 900 3204 13 900 3304 10 000 3602 00 000 3808 10 200 2936 27 900 3204 14 900 3304 20 000 3604 10 000 3808 20 100 2936 28 900 3204 15 900 3304 30 000 3604 90 000 3808 30 100 2936 29 900 3204 16 900 3304 91 000 3605 00 000 3808 40 100 2936 90 900 3204 17 900 3304 99 000 3606 10 000 3808 90 100 2937 10 000 3204 19 900 3305 10 000 3606 90 100 3809 10 900 2937 21 000 3204 20 900 3305 20 000 3606 90 900 3809 91 900 2937 22 000 3204 90 900 3305 30 000 3701 20 000 3809 92 900 2937 29 000 3206 11 900 3305 90 000 3701 30 900 3809 93 900 2937 91 000 3206 19 900 3306 10 000 3701 91 000 3810 10 000 2937 92 000 3206 20 900 3306 20 000 3701 99 900 3810 90 000 2937 99 000 3206 30 900 3306 90 000 3702 20 000 3811 11 000 2938 10 000 3206 41 900 3307 10 000 3702 31 000 3811 19 000 2938 90 000 3206 42 900 3307 20 000 3702 32 000 3811 21 000 2939 10 000 3206 43 900 3307 30 000 3702 39 000 3811 29 000 2939 29 900 3206 49 900 3307 41 000 3702 41 000 3811 90 000 2939 30 000 3206 50 900 3307 49 000 3702 42 000 3814 00 100 3814 00 900 3920 63 900 4002 31 190 4013 90 000 4206 10 000 3815 11 900 3920 69 900 4002 31 200 4014 10 000 4206 90 000 3815 12 900 3920 71 100 4002 39 190 4014 90 000 4302 11 000 3815 19 900 3920 71 900 4002 39 200 4015 11 000 4302 12 000 3815 90 900 3920 72 900 4002 41 100 4015 19 000 4302 13 000 3816 00 900 3920 73 100 4002 49 190 4015 90 000 4302 19 000 3817 10 900 3920 73 990 4002 49 200 4016 10 900 4302 20 000 3817 20 900 3920 79 100 4002 51 100 4016 91 000 4302 30 000 3818 00 900 3920 79 990 4002 59 190 4016 92 000 4303 10 000 3819 00 000 3920 91 000 4002 59 200 4016 93 000 4303 90 000 3820 00 000 3920 92 900 4002 60 190 4016 94 000 4304 00 000 3824 10 900 3920 93 900 4002 60 200 4016 95 100 4401 21 000 3824 20 900 3920 94 900 4002 70 190 4016 95 900 4401 22 000 3824 30 900 3920 99 100 4002 70 200 4016 99 900 4403 10 000 3824 40 900 3920 99 990 4002 80 190 4017 00 200 4403 20 900 3824 50 900 3921 11 000 4002 80 200 4017 00 900 4403 41 900 3824 60 900 3921 12 000 4002 91 100 4104 10 000 4403 49 900 3824 71 900 3921 13 000 4002 99 190 4104 21 000 4403 91 900 3824 79 900 3921 14 000 4002 99 200 4104 22 000 4403 92 900 3824 90 900 3921 19 100 4005 10 200 4104 29 000 4403 99 900 3904 10 100 3921 19 900 4005 10 900 4104 31 000 4404 10 000 3904 21 100 3921 90 190 4005 20 100 4104 39 000 4404 20 000 3904 22 100 3921 90 990 4005 20 900 4105 11 000 4407 10 000 3904 30 100 3922 10 000 4005 91 900 4105 12 000 4407 24 000 3904 40 100 3922 20 000 4005 99 190 4105 19 000 4407 25 000 3904 50 100 3922 90 000 4006 90 900 4105 20 000 4407 26 000 3907 50 000 3923 10 000 4007 00 900 4106 11 000 4407 29 000 3916 10 990 3923 21 900 4008 11 900 4106 12 000 4407 91 000 3916 20 990 3923 29 900 4008 19 900 4106 19 000 4407 92 000 3916 90 990 3923 30 100 4008 21 100 4106 20 000 4407 99 000 3917 10 100 3923 30 900 4008 21 900 4107 10 000 4408 10 000 3917 10 900 3923 40 900 4008 29 100 4107 21 000 4408 31 000 3917 21 000 3923 50 000 4008 29 900 4107 29 000 4408 39 000 3917 22 000 3923 90 100 4009 10 900 4107 90 000 4408 90 000 3917 23 000 3923 90 900 4009 20 900 4108 00 000 4409 10 000 3917 29 000 3924 10 000 4009 30 900 4109 00 000 4409 20 000 3917 31 000 3924 90 000 4009 40 900 4110 00 000 4410 11 000 3917 32 000 3925 10 000 4009 50 900 4111 00 000 4410 19 000 3917 33 000 3925 20 000 4010 11 000 4201 00 000 4410 90 000 3917 39 000 3925 30 000 4010 12 000 4202 11 000 4411 11 000 3917 40 000 3925 90 000 4010 13 000 4202 12 000 4411 19 000 3918 10 100 3926 10 000 4010 19 000 4202 19 000 4411 21 000 3918 10 900 3926 20 000 4010 21 000 4202 21 000 4411 29 000 3918 90 100 3926 30 000 4010 22 000 4202 22 000 4411 31 000 3918 90 900 3926 40 000 4010 23 000 4202 29 000 4411 39 000 3919 10 100 3926 90 300 4010 24 000 4202 31 000 4411 91 000 3919 10 900 3926 90 500 4010 29 000 4202 32 000 4411 99 000 3919 90 900 3926 90 700 4011 10 000 4202 39 000 4412 13 000 3920 10 100 3926 90 800 4011 20 000 4202 91 000 4412 14 000 3920 10 990 3926 90 900 4011 30 000 4202 92 000 4412 19 000 3920 20 100 4001 29 200 4011 40 000 4202 99 000 4412 22 000 3920 20 990 4001 29 900 4011 50 000 4203 10 000 4412 23 000 3920 30 900 4001 30 100 4011 91 000 4203 21 000 4412 29 000 3920 41 900 4001 30 200 4011 99 000 4203 29 000 4412 92 000 3920 42 900 4002 11 100 4012 10 000 4203 30 000 4412 93 000 3920 51 900 4002 19 190 4012 20 900 4203 40 000 4412 99 000 3920 59 900 4002 19 200 4012 90 000 4204 00 100 4413 00 000 3920 61 900 4002 20 190 4013 10 000 4204 00 900 4414 00 000 3920 62 900 4002 20 200 4013 20 000 4205 00 000 4415 10 900 4415 20 900 4804 42 100 4810 39 900 4823 60 000 5209 31 000 4416 00 000 4804 42 200 4810 91 200 4823 70 000 5209 32 000 4417 00 900 4804 42 900 4810 91 900 4823 90 300 5209 39 000 4418 10 000 4804 49 100 4810 99 900 4823 90 400 5209 41 000 4418 20 000 4804 49 200 4811 10 000 4823 90 990 5209 42 000 4418 30 000 4804 49 900 4811 21 000 4907 00 100 5209 43 000 4418 40 000 4804 51 100 4811 29 000 4908 10 000 5209 49 000 4418 50 000 4804 51 200 4811 31 000 4908 90 000 5209 51 000 4418 90 100 4804 51 900 4811 39 000 4909 00 000 5209 52 000 4418 90 900 4804 52 100 4811 40 900 4910 00 000 5209 59 000 4419 00 000 4804 52 200 4811 90 000 4911 91 000 5210 11 000 4420 10 000 4804 52 900 4812 00 000 4911 99 900 5210 12 000 4420 90 100 4804 59 100 4813 10 000 5006 00 000 5210 19 000 4420 90 900 4804 59 200 4813 20 000 5007 10 000 5210 21 000 4421 10 000 4804 59 900 4813 90 100 5007 20 000 5210 22 000 4421 90 900 4805 10 100 4813 90 900 5007 90 000 5210 29 000 4502 00 900 4805 10 900 4814 10 000 5109 10 000 5210 31 000 4503 90 900 4805 21 100 4814 20 000 5109 90 000 5210 32 000 4504 10 900 4805 21 900 4814 30 000 5110 00 100 5210 39 000 4504 90 900 4805 22 100 4814 90 100 5111 11 000 5210 41 000 4601 20 000 4805 22 900 4814 90 900 5111 19 000 5210 42 000 4601 91 000 4805 23 100 4815 00 000 5111 20 000 5210 49 000 4601 99 000 4805 23 900 4816 10 000 5111 30 000 5210 51 000 4602 10 200 4805 29 100 4816 20 000 5111 90 000 5210 52 000 4602 10 900 4805 29 900 4816 30 000 5112 11 000 5210 59 000 4602 90 300 4805 30 000 4816 90 000 5112 19 000 5211 11 000 4602 90 900 4805 40 000 4817 10 000 5112 20 000 5211 12 000 4801 00 000 4805 50 000 4817 20 000 5112 30 000 5211 19 000 4802 10 000 4805 60 100 4817 30 000 5112 90 000 5211 21 000 4802 20 000 4805 60 200 4818 10 000 5113 00 900 5211 22 000 4802 30 000 4805 60 900 4818 20 000 5204 20 000 5211 29 000 4802 40 000 4805 70 100 4818 30 000 5207 10 000 5211 31 000 4802 51 900 4805 70 900 4818 40 000 5207 90 000 5211 32 000 4802 52 200 4805 80 100 4818 50 000 5208 11 000 5211 39 000 4802 52 300 4805 80 900 4818 90 000 5208 12 000 5211 41 000 4802 52 900 4806 10 000 4819 10 200 5208 13 000 5211 42 000 4802 53 200 4806 20 000 4819 10 900 5208 19 000 5211 43 000 4802 53 900 4806 30 000 4819 20 100 5208 21 000 5211 49 000 4802 60 200 4806 40 000 4819 20 900 5208 22 000 5211 51 000 4802 60 300 4807 10 000 4819 30 900 5208 23 000 5211 52 000 4802 60 400 4807 90 000 4819 40 900 5208 29 000 5211 59 000 4802 60 500 4808 10 000 4819 50 000 5208 31 000 5212 11 000 4802 60 900 4808 30 100 4819 60 000 5208 32 000 5212 12 000 4803 00 000 4808 30 900 4820 10 000 5208 33 000 5212 13 000 4804 11 100 4808 90 100 4820 20 900 5208 39 000 5212 14 000 4804 11 200 4808 90 900 4820 30 000 5208 41 000 5212 15 000 4804 11 900 4809 10 000 4820 40 000 5208 42 000 5212 21 000 4804 19 100 4809 20 000 4820 50 000 5208 43 000 5212 22 000 4804 19 200 4809 90 000 4820 90 100 5208 49 000 5212 23 000 4804 19 900 4810 11 100 4820 90 900 5208 51 000 5212 24 000 4804 31 100 4810 11 200 4821 10 000 5208 52 000 5212 25 000 4804 31 200 4810 11 900 4821 90 000 5208 53 000 5309 11 000 4804 31 900 4810 12 000 4823 11 000 5208 59 000 5309 19 000 4804 39 100 4810 21 100 4823 19 000 5209 11 000 5309 21 000 4804 39 200 4810 21 900 4823 20 000 5209 12 000 5309 29 000 4804 39 900 4810 29 100 4823 40 000 5209 19 000 5310 10 900 4804 41 100 4810 29 900 4823 51 000 5209 21 000 5310 90 900 4804 41 200 4810 31 000 4823 59 100 5209 22 000 5311 00 000 4804 41 900 4810 32 000 4823 59 900 5209 29 000 5401 10 100 5401 20 100 5513 21 000 5601 21 000 5804 29 000 6002 93 000 5404 90 100 5513 22 000 5601 22 000 5804 30 000 6002 99 000 5405 00 100 5513 23 000 5601 29 000 5805 00 000 6101 20 000 5406 10 000 5513 29 000 5601 30 000 5806 10 000 6101 30 000 5406 20 000 5513 31 000 5602 10 000 5806 20 000 6102 20 000 5407 10 000 5513 32 000 5602 21 000 5806 31 900 6103 11 000 5407 20 900 5513 33 000 5602 29 000 5806 32 900 6103 31 000 5407 30 000 5513 39 000 5602 90 000 5806 39 900 6103 32 000 5407 41 000 5513 41 000 5603 11 900 5806 40 000 6103 33 000 5407 42 000 5513 42 000 5603 12 900 5807 10 000 6103 41 000 5407 43 000 5513 43 000 5603 13 900 5807 90 000 6103 42 000 5407 44 000 5513 49 000 5603 14 900 5808 10 000 6103 43 000 5407 51 000 5514 11 000 5603 91 900 5808 90 000 6104 11 000 5407 52 000 5514 12 000 5603 92 900 5809 00 000 6104 19 000 5407 53 000 5514 13 000 5603 93 900 5810 10 000 6104 21 000 5407 54 000 5514 19 000 5603 94 900 5810 91 000 6104 22 000 5407 61 000 5514 21 000 5604 10 900 5810 92 000 6104 32 000 5407 69 000 5514 22 000 5604 20 100 5810 99 000 6104 33 000 5407 71 000 5514 23 000 5604 20 990 5811 00 100 6104 41 000 5407 72 000 5514 29 000 5604 90 990 5811 00 900 6104 42 000 5407 73 000 5514 31 000 5605 00 100 5901 10 000 6104 43 000 5407 74 000 5514 32 000 5606 00 000 5901 90 000 6104 51 000 5407 81 000 5514 33 000 5607 21 000 5902 10 000 6104 52 000 5407 82 000 5514 39 000 5607 41 000 5902 20 000 6104 53 000 5407 83 000 5514 41 000 5607 49 000 5902 90 000 6104 62 000 5407 84 000 5514 42 000 5607 50 000 5903 10 900 6104 63 000 5407 91 900 5514 43 000 5608 11 000 5903 20 900 6105 10 000 5407 92 000 5514 49 000 5608 19 000 5903 90 900 6105 20 000 5407 93 000 5515 11 000 5608 90 000 5904 10 000 6105 90 000 5407 94 000 5515 12 000 5609 00 000 5904 91 000 6106 20 000 5408 10 000 5515 13 000 5702 32 000 5904 92 000 6106 90 000 5408 21 000 5515 19 000 5702 42 000 5905 00 000 6107 11 000 5408 22 000 5515 21 000 5702 52 000 5906 10 000 6107 12 000 5408 23 000 5515 22 000 5702 92 000 5906 91 000 6107 19 000 5408 24 000 5515 29 000 5703 20 000 5906 99 000 6107 21 000 5408 31 000 5515 91 000 5703 30 000 5907 00 000 6107 22 000 5408 32 000 5515 92 000 5704 90 000 5908 00 000 6107 29 000 5408 33 000 5515 99 000 5801 10 000 5909 00 000 6107 91 000 5408 34 000 5516 11 000 5801 21 000 5910 00 000 6107 92 000 5506 10 900 5516 12 000 5801 22 000 5911 10 000 6107 99 000 5506 20 900 5516 13 000 5801 23 000 5911 20 000 6108 21 000 5506 30 900 5516 14 000 5801 24 000 5911 40 900 6108 22 000 5506 90 000 5516 21 000 5801 25 000 5911 90 900 6108 31 000 5507 00 900 5516 22 000 5801 26 000 6001 10 000 6108 91 000 5508 10 100 5516 23 000 5801 31 000 6001 21 000 6108 92 000 5508 20 100 5516 24 000 5801 32 000 6001 22 000 6109 10 000 5511 10 000 5516 31 000 5801 33 000 6001 29 000 6109 90 000 5511 20 000 5516 32 000 5801 34 000 6001 91 000 6110 10 000 5511 30 000 5516 33 000 5801 35 000 6001 92 000 6110 20 000 5512 11 000 5516 34 000 5801 36 000 6001 99 000 6110 30 000 5512 19 000 5516 41 000 5801 90 000 6002 10 000 6111 10 000 5512 21 000 5516 42 000 5802 11 000 6002 20 000 6111 20 000 5512 29 000 5516 43 000 5802 19 000 6002 30 000 6111 30 000 5512 91 000 5516 44 000 5802 20 000 6002 41 000 6112 11 000 5512 99 000 5516 91 000 5802 30 000 6002 42 000 6112 12 000 5513 11 000 5516 92 000 5803 10 900 6002 43 000 6112 19 000 5513 12 000 5516 93 000 5803 90 900 6002 49 000 6114 20 000 5513 13 000 5516 94 000 5804 10 000 6002 91 000 6114 30 000 5513 19 000 5601 10 000 5804 21 000 6002 92 000 6115 11 900 6115 12 900 6206 20 000 6306 11 000 6802 21 000 6903 10 900 6115 19 900 6206 30 000 6306 12 000 6802 22 000 6903 20 900 6115 20 900 6207 21 000 6306 19 000 6802 23 000 6903 90 900 6115 91 900 6207 91 000 6306 21 000 6802 29 000 6904 10 000 6115 92 900 6209 20 000 6306 22 000 6802 91 000 6904 90 000 6115 93 900 6209 30 000 6306 29 000 6802 92 000 6905 10 000 6201 11 000 6210 20 000 6306 31 000 6802 93 000 6905 90 000 6201 12 000 6210 30 000 6306 39 000 6802 99 000 6906 00 000 6201 91 000 6211 32 000 6306 41 000 6803 00 000 6907 10 000 6201 92 000 6211 42 000 6306 49 000 6804 10 900 6907 90 000 6201 93 000 6212 10 000 6306 91 000 6804 21 000 6908 10 000 6202 11 000 6214 10 000 6306 99 000 6804 22 000 6908 90 000 6202 12 000 6214 20 000 6307 10 000 6804 23 900 6909 90 000 6202 13 000 6214 30 000 6307 20 000 6804 30 000 6910 10 000 6202 92 000 6214 40 000 6307 90 100 6805 10 000 6910 90 000 6202 93 000 6214 90 000 6307 90 900 6805 20 000 6911 10 000 6203 11 000 6215 10 000 6308 00 000 6805 30 000 6911 90 000 6203 12 000 6215 20 000 6310 10 000 6806 10 100 6912 00 000 6203 19 000 6215 90 000 6310 90 000 6806 10 900 6913 10 000 6203 21 000 6301 10 000 6403 12 000 6806 20 000 6913 90 000 6203 22 000 6301 20 000 6403 19 000 6806 90 100 6914 10 000 6203 23 000 6301 30 000 6403 20 000 6806 90 900 6914 90 000 6203 29 000 6301 40 000 6403 30 000 6807 10 000 7002 10 100 6203 31 000 6301 90 000 6403 40 000 6807 90 000 7002 20 100 6203 32 000 6302 10 000 3403 51 000 6808 00 000 7002 31 100 6203 33 000 6302 21 000 3403 59 000 6809 11 000 7002 32 100 6203 39 000 6302 22 000 3403 91 000 6809 19 000 7002 39 100 6203 41 000 6302 29 000 3403 99 000 6809 90 100 7003 12 000 6203 42 000 6302 31 000 3404 11 000 6809 90 200 7003 19 100 6203 43 000 6302 32 000 3404 19 000 6809 90 900 7003 19 900 6203 49 000 6302 39 000 3404 20 000 6810 11 000 7003 20 000 6204 11 000 6302 40 000 6501 00 000 6810 19 000 7003 30 000 6204 12 000 6302 51 000 6502 00 000 6810 91 000 7004 20 000 6204 13 000 6302 52 000 6503 00 000 6810 99 000 7004 90 000 6204 19 000 6302 53 000 6504 00 000 6811 10 000 7005 10 000 6204 21 000 6302 59 000 6505 10 000 6811 20 000 7005 21 000 6204 22 000 6302 60 000 6505 90 000 6811 30 000 7005 29 000 6204 23 000 6302 91 000 6506 10 000 6811 90 000 7005 30 000 6204 29 000 6302 92 000 6506 91 000 6812 40 000 7006 00 000 6204 31 000 6302 93 000 6506 92 000 6812 50 900 7007 11 000 6204 32 000 6302 99 000 6506 99 000 6812 60 000 7007 19 100 6204 33 000 6303 11 000 6507 00 000 6812 70 000 7007 19 900 6204 39 000 6303 12 000 6601 10 000 6812 90 100 7007 21 000 6204 41 000 6303 19 000 6601 91 000 6812 90 900 7007 29 100 6204 42 000 6303 91 000 6601 99 000 6813 10 000 7007 29 900 6204 43 000 6303 92 000 6602 00 000 6813 90 000 7008 00 100 6204 44 000 6303 99 000 6603 10 000 6814 10 000 7008 00 900 6204 49 000 6304 11 000 6603 20 000 6814 90 000 7009 10 000 6204 51 000 6304 19 000 6603 90 000 6815 10 000 7009 91 000 6204 52 000 6304 91 000 6701 00 000 6815 20 000 7009 92 000 6204 53 000 6304 92 000 6702 10 000 6815 91 000 7010 10 000 6204 59 000 6304 93 000 6702 90 000 6815 99 000 7010 91 100 6204 61 000 6304 99 000 6703 00 000 6901 00 000 7010 92 100 6204 62 000 6305 10 900 6704 11 000 6902 10 100 7010 93 100 6204 63 000 6305 20 000 6704 19 000 6902 10 900 7010 94 100 6204 69 000 6305 32 000 6704 20 000 6902 20 100 7012 00 000 6205 10 000 6305 33 000 6704 90 000 6902 20 900 7013 10 100 6205 20 000 6305 39 000 6801 00 000 6902 90 100 7013 10 900 6205 30 000 6305 90 000 6802 10 000 6902 90 900 7013 21 000 7013 29 000 7203 10 000 7212 10 000 7216 33 000 7226 93 900 7013 31 000 7203 90 000 7212 20 000 7216 40 000 7226 94 900 7013 32 000 7204 50 900 7212 30 000 7216 50 000 7226 99 900 7013 39 000 7205 21 000 7212 40 000 7216 65 000 7227 10 900 7013 91 100 7205 29 000 7212 50 000 7216 69 000 7227 20 900 7013 91 900 7206 10 900 7212 60 000 7216 91 000 7227 90 900 7013 99 100 7206 90 000 7213 10 100 7216 99 000 7228 10 900 7013 99 900 7207 11 900 7213 10 200 7217 10 100 7228 20 900 7014 00 000 7207 12 900 7213 10 300 7217 10 900 7228 30 900 7015 10 000 7207 19 900 7213 10 900 7217 20 100 7228 40 900 7015 90 000 7207 20 900 7213 20 100 7217 20 900 7228 50 900 7016 10 000 7208 10 100 7213 20 200 7217 30 100 7228 60 900 7016 90 000 7208 10 900 7213 20 300 7217 30 900 7228 70 900 7017 10 000 7208 25 100 7213 20 900 7217 90 100 7228 80 900 7017 20 000 7208 25 900 7213 91 100 7217 90 900 7229 10 900 7017 90 000 7208 26 100 7213 91 200 7218 10 900 7229 20 900 7018 10 000 7208 26 900 7213 91 300 7218 91 900 7229 90 000 7018 20 000 7208 27 100 7213 91 900 7218 99 900 7301 10 000 7018 90 000 7208 27 900 7213 99 100 7219 11 900 7301 20 000 7019 31 900 7208 36 100 7213 99 200 7219 12 900 7303 00 100 7019 32 000 7208 36 900 7213 99 300 7219 13 900 7303 00 900 7019 39 900 7208 37 100 7213 99 900 7219 14 900 7304 10 900 7019 40 000 7208 37 900 7214 10 100 7219 21 900 7304 21 000 7019 51 000 7208 38 100 7214 10 200 7219 22 900 7304 29 900 7019 52 000 7208 38 900 7214 10 300 7219 23 900 7304 31 100 7019 59 000 7208 39 100 7214 10 900 7219 24 900 7304 31 990 7019 90 000 7208 39 900 7214 20 100 7219 31 900 7304 39 100 7020 00 000 7208 40 900 7214 20 200 7219 32 900 7304 39 990 7106 10 000 7208 51 000 7214 20 300 7219 33 900 7304 41 100 7106 92 000 7208 52 000 7214 20 900 7219 34 900 7304 41 990 7107 00 000 7208 53 000 7214 30 100 7219 35 900 7304 49 100 7108 11 000 7208 54 900 7214 30 200 7219 90 900 7304 49 990 7108 12 000 7208 90 900 7214 30 300 7220 11 900 7304 51 100 7108 13 000 7209 15 000 7214 30 900 7220 12 900 7304 51 990 7108 20 000 7209 16 900 7214 91 100 7220 20 900 7304 59 100 7109 00 000 7209 17 900 7214 91 200 7220 90 900 7304 59 990 7110 11 200 7209 18 900 7214 91 300 7221 00 900 7304 90 100 7110 19 000 7209 25 000 7214 91 900 7222 11 900 7304 90 900 7110 21 200 7209 26 900 7214 99 100 7222 19 900 7305 31 100 7110 29 000 7209 27 900 7214 99 200 7222 20 900 7305 39 100 7110 31 200 7209 28 900 7214 99 300 7222 30 900 7305 90 100 7110 39 000 7209 90 900 7214 99 900 7222 40 000 7306 10 200 7110 41 200 7210 11 900 7215 10 100 7223 00 900 7306 10 300 7110 49 000 7210 12 900 7215 10 200 7224 10 900 7306 10 900 7111 00 100 7210 20 000 7215 10 300 7224 90 900 7306 20 200 7111 00 900 7210 30 900 7215 10 900 7225 11 900 7306 20 300 7113 11 000 7210 41 900 7215 50 100 7225 19 900 7306 20 900 7113 19 900 7210 49 900 7215 50 200 7225 20 900 7306 30 100 7113 20 000 7210 50 900 7215 50 300 7225 30 900 7306 30 900 7114 11 000 7210 61 900 7215 50 900 7225 40 900 7306 40 100 7114 19 000 7210 69 900 7215 90 100 7225 50 900 7306 40 900 7114 20 000 7210 70 900 7215 90 200 7225 91 900 7306 50 100 7115 10 000 7210 90 900 7215 90 300 7225 92 900 7306 50 900 7115 90 000 7211 13 000 7215 90 900 7225 99 900 7306 60 000 7116 10 000 7211 14 000 7216 10 000 7226 11 900 7306 90 200 7116 20 000 7211 19 000 7216 21 000 7226 19 900 7306 90 300 7117 11 000 7211 23 000 7216 22 000 7226 20 900 7306 90 900 7117 19 000 7211 29 000 7216 31 000 7226 91 900 7307 11 100 7117 90 000 7211 90 000 7216 32 000 7226 92 900 7307 11 900 7307 19 100 7318 21 000 7407 29 100 7505 21 000 7616 99 200 7307 19 900 7318 22 000 7407 29 900 7505 22 000 7616 99 300 7307 21 000 7318 23 000 7408 11 100 7506 10 000 7616 99 400 7307 22 000 7318 24 000 7408 11 900 7506 20 000 7616 99 900 7307 23 000 7318 29 000 7408 19 100 7507 11 000 7801 10 100 7307 29 000 7319 10 000 7408 19 900 7507 12 000 7801 91 100 7307 91 000 7319 20 000 7408 21 100 7507 20 000 7801 99 100 7307 92 000 7319 30 000 7408 21 910 7508 10 000 7803 00 000 7307 93 000 7319 90 000 7408 21 990 7508 90 100 7804 11 000 7307 99 000 7320 10 000 7408 22 100 7508 90 200 7804 19 000 7308 10 000 7320 20 000 7408 22 910 7508 90 300 7804 20 000 7308 20 000 7320 90 000 7408 22 990 7508 90 400 7805 00 000 7308 30 000 7321 11 000 7408 29 100 7508 90 900 7806 00 900 7308 40 000 7321 12 000 7408 29 910 7603 10 000 7903 10 000 7308 90 900 7321 13 000 7408 29 990 7603 20 000 7903 90 900 7309 00 000 7321 81 000 7409 11 900 7604 10 100 7904 00 000 7310 10 000 7321 82 000 7409 19 000 7604 10 900 7905 00 900 7310 21 120 7321 83 000 7409 21 900 7604 21 100 7906 00 000 7310 21 190 7321 90 200 7409 29 000 7604 21 900 7907 00 100 7310 21 900 7321 90 900 7409 31 900 7604 29 000 7907 00 900 7310 29 120 7322 11 000 7409 39 000 7605 11 100 8003 00 100 7310 29 190 7322 19 100 7409 40 900 7605 11 900 8003 00 900 7310 29 200 7322 19 900 7409 90 900 7605 19 100 8004 00 000 7310 29 900 7322 90 000 7410 11 000 7605 19 900 8005 00 000 7312 10 000 7323 10 100 7410 12 000 7605 21 100 8006 00 000 7312 90 000 7323 10 900 7410 21 000 7605 21 900 8007 00 900 7313 00 000 7323 91 000 7410 22 000 7605 29 100 8101 10 000 7314 12 000 7323 92 000 7411 10 900 7605 29 900 8101 92 000 7314 13 000 7323 93 000 7411 21 900 7606 11 900 8101 93 000 7314 14 100 7323 94 000 7411 22 900 7606 12 900 8101 99 000 7314 14 900 7323 99 000 7411 29 900 7606 91 900 8102 10 000 7314 19 100 7324 10 000 7412 10 000 7606 92 900 8102 92 000 7314 19 900 7324 21 000 7412 20 000 7607 11 200 8102 93 000 7314 20 100 7324 29 000 7413 00 000 7607 11 900 8102 99 000 7314 20 900 7324 90 000 7414 20 000 7607 19 200 8103 10 900 7314 31 000 7325 10 100 7414 90 000 7607 19 900 8103 90 000 7314 39 000 7325 10 300 7415 10 000 7607 20 200 8104 30 000 7314 41 000 7325 10 900 7415 21 000 7607 20 900 8104 90 000 7314 42 000 7325 91 000 7415 29 000 7608 10 100 8105 10 900 7314 49 000 7325 99 100 7415 31 000 7608 10 900 8105 90 000 7314 50 000 7325 99 300 7415 32 000 7608 20 100 8106 00 900 7315 11 000 7325 99 900 7415 39 000 7608 20 900 8107 10 900 7315 12 000 7326 11 000 7416 00 000 7609 00 000 8107 90 000 7315 19 000 7326 19 100 7417 00 900 7610 10 000 8108 10 900 7315 20 000 7326 19 300 7418 11 000 7610 90 000 8108 90 000 7315 81 000 7326 19 900 7418 19 000 7611 00 000 8109 10 900 7315 82 000 7326 20 000 7418 20 000 7612 10 000 8109 90 000 7315 89 000 7326 90 100 7419 10 000 7612 90 900 8110 00 900 7315 90 000 7326 90 300 7419 91 100 7614 10 000 8111 00 900 7316 00 000 7326 90 900 7419 91 200 7614 90 000 8112 11 000 7317 00 100 7405 00 100 7419 91 300 7615 11 000 8112 19 000 7317 00 900 7406 10 000 7419 91 900 7615 19 100 8112 20 900 7318 11 000 7406 20 000 7419 99 100 7615 19 200 8112 30 900 7318 12 000 7407 10 100 7419 99 200 7615 19 800 8112 40 900 7318 13 000 7407 10 900 7419 99 300 7615 19 900 8112 91 900 7318 14 000 7407 21 100 7419 99 900 7615 20 000 8112 99 000 7318 15 000 7407 21 900 7504 00 000 7616 10 000 8113 00 900 7318 16 000 7407 22 100 7505 11 000 7616 91 000 8201 10 000 7318 19 000 7407 22 900 7505 12 000 7616 99 100 8201 30 000 8201 40 000 8308 90 200 8414 80 110 8425 11 900 8472 30 000 8202 31 000 8308 90 900 8414 80 190 8425 19 900 8472 90 000 8202 39 000 8309 10 000 8414 80 990 8425 31 990 8473 10 000 8202 91 000 8309 90 100 8414 90 900 8425 39 990 8473 21 000 8202 99 100 8309 90 900 8415 10 000 8425 42 100 8473 29 000 8202 99 900 8310 00 000 8415 20 100 8425 42 990 8473 30 000 8205 51 000 8311 10 000 8415 20 900 8426 11 900 8473 40 000 8205 90 100 8311 20 000 8415 81 000 8426 20 900 8473 50 000 8206 00 000 8311 30 000 8415 82 000 8426 30 900 8474 10 100 8208 30 000 8311 90 000 8415 83 000 8428 10 100 8474 31 900 8209 00 000 8403 10 000 8415 90 000 8428 40 000 8474 90 100 8210 00 000 8403 90 000 8416 10 000 8431 10 000 8476 21 000 8211 10 000 8404 10 900 8416 20 900 8431 20 000 8476 29 000 8211 91 000 8404 90 900 8416 90 100 8431 31 000 8476 81 000 8211 92 900 8407 21 100 8416 90 900 8431 39 000 8476 89 000 8211 93 900 8407 21 200 8417 90 900 8431 41 000 8476 90 000 8211 94 000 8407 29 100 8418 10 900 8431 42 000 8477 90 900 8211 95 000 8407 29 200 8418 21 000 8431 43 000 8478 90 900 8212 10 000 8407 31 100 8418 22 000 8431 49 100 8479 10 900 8212 20 100 8407 31 200 8418 29 000 8431 49 900 8479 20 900 8212 20 900 8407 32 100 8418 30 900 8441 10 100 8479 30 900 8212 90 000 8407 32 200 8418 40 900 8441 90 100 8479 40 900 8213 00 000 8407 33 100 8418 50 900 8450 11 000 8479 60 000 8214 10 000 8407 33 200 8418 61 100 8450 12 000 8479 81 900 8214 20 000 8407 34 100 8418 61 900 8450 19 000 8479 82 900 8214 90 000 8407 34 200 8418 69 100 8450 20 000 8479 89 900 8215 10 000 8407 90 910 8418 69 900 8450 90 000 8479 90 100 8215 20 000 8407 90 920 8418 91 000 8451 10 000 8479 90 900 8215 91 000 8408 20 100 8418 99 900 8451 21 000 8481 10 000 8215 99 000 8408 20 200 8419 11 100 8451 29 900 8481 20 000 8301 10 000 8408 90 910 8419 19 900 8451 30 900 8481 30 000 8301 20 000 8408 90 920 8419 39 900 8451 40 900 8481 80 390 8301 30 000 8409 10 100 8419 40 900 8451 80 900 8481 80 900 8301 40 900 8409 10 200 8419 50 900 8451 90 900 8481 90 000 8301 50 900 8409 91 100 8419 81 000 8452 30 000 8482 10 000 8301 60 000 8409 91 200 8419 89 900 8452 40 000 8482 20 000 8301 70 000 8409 99 100 8419 90 190 8452 90 000 8482 30 000 8302 10 000 8409 99 200 8419 90 990 8469 11 000 8482 40 000 8302 20 000 8411 11 900 8421 11 900 8469 12 000 8482 50 000 8302 30 000 8411 21 900 8421 12 000 8469 20 000 8482 80 000 8302 41 000 8411 81 900 8421 19 900 8469 30 000 8482 91 000 8302 42 000 8411 91 900 8421 21 900 8470 10 000 8482 99 000 8302 49 000 8411 99 900 8421 23 000 8470 21 000 8483 10 900 8302 50 000 8412 10 900 8421 29 900 8470 29 000 8483 20 900 8302 60 000 8412 29 900 8421 31 000 8470 30 000 8483 30 900 8303 00 000 8412 31 900 8421 39 900 8470 40 000 8483 40 900 8304 00 100 8412 39 900 8421 91 900 8470 50 000 8483 50 900 8304 00 900 8412 80 900 8421 99 900 8470 90 000 8483 60 900 8305 10 000 8412 90 900 8422 11 000 8471 10 000 8483 90 900 8305 20 000 8413 19 100 8422 90 100 8471 30 000 8484 10 000 8305 90 000 8413 30 000 8423 10 000 8471 41 000 8484 20 000 8306 10 000 8413 81 100 8423 81 000 8471 49 000 8484 90 000 8306 21 000 8413 91 100 8423 82 100 8471 50 000 8485 10 000 8306 29 000 8414 20 000 8423 89 100 8471 60 000 8485 90 000 8306 30 000 8414 40 000 8423 90 000 8471 70 000 8501 10 190 8307 10 100 8414 51 000 8424 20 900 8471 80 000 8501 20 190 8307 10 900 8414 59 100 8424 81 100 8471 90 000 8501 31 190 8307 90 000 8414 59 900 8424 89 900 8472 10 000 8501 32 190 8308 20 000 8414 60 900 8424 90 900 8472 20 000 8501 40 190 8501 51 190 8516 79 000 8525 40 000 8539 31 000 8544 70 000 8501 52 190 8516 80 000 8527 12 000 8539 32 000 8545 11 900 8503 00 000 8516 90 000 8527 13 000 8539 39 000 8545 19 100 8504 10 000 8517 11 000 8527 19 000 8539 41 000 8545 19 900 8504 40 100 8517 19 000 8527 21 000 8539 49 000 8545 20 000 8504 50 100 8517 21 000 8527 29 000 8539 90 000 8545 90 000 8504 90 900 8517 22 000 8527 31 000 8540 11 000 8546 10 000 8505 11 000 8517 30 000 8527 32 000 8540 12 000 8546 20 000 8505 19 000 8517 50 000 8527 39 000 8540 20 000 8546 90 000 8505 20 000 8517 80 000 8527 90 100 8540 40 000 8547 10 000 8505 30 000 8517 90 000 8527 90 900 8540 50 000 8547 20 000 8505 90 000 8518 10 000 8528 12 000 8540 60 000 8547 90 100 8506 10 000 8518 21 000 8528 13 000 8540 71 000 8547 90 900 8506 30 000 8518 22 000 8528 21 000 8540 72 000 8548 10 000 8506 40 000 8518 29 000 8528 22 000 8540 79 000 8548 90 000 8506 50 000 8518 30 000 8508 30 000 8540 81 000 8702 00 000 8506 60 000 8518 40 000 8529 10 100 8540 89 000 8702 10 000 8506 80 000 8518 50 000 8529 10 900 8540 91 000 8702 90 000 8506 90 900 8518 90 000 8529 90 100 8540 99 100 8703 00 000 8507 10 000 8519 10 000 8529 90 900 8540 99 900 8703 10 000 8507 20 000 8519 21 000 8531 10 100 8541 10 000 8703 20 000 8507 30 000 8519 29 000 8531 10 200 8541 21 000 8703 21 000 8507 40 000 8519 31 000 8531 10 900 8541 29 000 8703 21 200 8507 80 000 8519 39 000 8531 20 000 8541 30 000 8703 21 300 8509 10 000 8519 40 000 8531 80 100 8541 40 000 8703 21 400 8509 20 000 8519 92 000 8531 80 200 8541 50 000 8703 22 000 8509 30 000 8519 93 000 8531 80 900 8541 60 000 8703 22 300 8509 40 000 8519 99 000 8531 90 000 8541 90 000 8703 22 400 8509 80 000 8520 10 000 8533 10 000 8542 12 000 8703 23 000 8509 90 000 8520 20 000 8533 21 000 8542 13 000 8703 23 120 8510 10 000 8520 32 000 8533 29 000 8542 14 000 8703 23 130 8510 20 000 8520 33 000 8533 31 000 8542 19 000 8703 23 140 8510 30 000 8520 39 000 8533 39 000 8542 30 000 8703 23 190 8510 90 000 8520 90 000 8533 40 000 8542 40 000 8703 23 210 8511 10 000 8521 10 000 8533 90 000 8542 50 000 8703 23 220 8511 20 000 8521 90 000 8534 00 000 8542 90 000 8703 23 290 8511 30 000 8522 10 000 8535 10 000 8543 20 900 8703 23 310 8511 40 000 8522 90 000 8535 21 000 8543 40 000 8703 23 320 8511 50 000 8523 11 900 8535 29 000 8543 81 000 8703 23 390 8511 80 000 8523 12 900 8535 30 000 8543 89 100 8703 24 000 8511 90 000 8523 13 900 8535 40 000 8543 89 900 8703 24 200 8512 10 000 8523 20 000 8535 90 000 8543 90 900 8703 24 900 8512 20 000 8523 30 000 8536 10 000 8544 11 100 8703 30 000 8512 30 000 8523 90 900 8536 20 000 8544 11 900 8703 31 000 8512 40 000 8524 10 000 8536 30 000 8544 19 100 8703 31 200 8512 90 000 8524 31 000 8536 41 000 8544 19 900 8703 31 300 8513 10 000 8524 32 900 8536 49 000 8544 20 100 8703 31 400 8513 90 000 8524 39 900 8536 50 000 8544 20 900 8703 32 000 8516 10 000 8524 40 000 8536 61 000 8544 30 100 8703 32 120 8516 21 000 8524 51 900 8536 69 000 8544 30 900 8703 32 130 8516 29 000 8454 52 900 8536 90 000 8544 41 100 8703 32 140 8516 31 000 8524 53 900 8537 10 000 8544 41 900 8703 32 190 8516 32 000 8524 60 000 8537 20 000 8544 49 100 8703 32 210 8516 33 000 8524 91 000 8538 10 000 8544 49 900 8703 32 220 8516 40 000 8524 99 900 8538 90 000 8544 51 000 8703 32 290 8516 50 000 8525 10 000 8539 10 000 8544 59 100 8703 33 000 8516 60 000 8525 20 100 8539 21 000 8544 59 900 8703 33 120 8516 71 000 8525 20 900 8539 22 000 8544 60 100 8703 33 190 8516 72 000 8525 30 000 8539 29 000 8544 60 900 8703 33 210 8703 33 220 8714 19 000 9008 90 000 9031 41 000 9112 80 000 8703 33 290 8714 20 000 9009 11 000 9031 49 000 9112 90 000 8703 90 000 8714 91 000 9009 12 000 9031 90 000 9113 10 100 8703 90 200 8714 92 000 9009 21 000 9032 10 100 9113 10 900 8703 90 300 8714 93 000 9009 22 000 9032 10 900 9113 20 000 8703 90 400 8714 94 000 9009 30 000 9032 20 100 9113 90 000 8703 90 910 8714 95 000 9009 90 000 9032 20 900 9114 10 000 8703 90 920 8714 96 000 9010 10 000 9032 81 100 9114 20 000 8703 90 930 8714 99 000 9010 41 000 9032 81 900 9114 30 000 8703 90 940 8715 00 100 9010 42 000 9032 89 100 9114 40 000 8703 90 950 8715 00 900 9010 49 000 9032 89 900 9114 90 000 8703 90 990 8716 10 000 9010 50 000 9032 90 100 9201 10 000 8704 00 000 8716 20 900 9010 60 000 9032 90 900 9201 20 000 8704 10 000 8716 31 000 9010 90 000 9101 11 000 9201 90 000 8704 20 000 8716 80 000 9011 90 000 9101 12 000 9202 10 000 8704 21 000 8716 90 900 9012 90 000 9101 19 000 9202 90 000 8704 21 190 9001 10 000 9013 10 000 9101 21 000 9203 00 000 8704 21 210 9001 20 000 9013 20 000 9101 29 000 9204 10 000 8704 21 290 9001 30 000 9013 80 000 9101 91 000 9204 20 000 8704 21 900 9001 40 000 9013 90 000 9101 99 000 9205 10 000 8704 30 000 9001 50 000 9014 10 000 9102 11 000 9205 90 000 8704 31 000 9001 90 000 9014 20 000 9102 12 000 9206 00 000 8704 31 190 9002 11 000 9014 80 000 9102 19 000 9207 10 000 8704 31 210 9002 19 000 9014 90 000 9102 21 000 9207 90 000 8704 31 290 9002 20 000 9015 90 000 9102 29 000 9208 10 000 8704 31 900 9002 90 000 9016 00 190 9102 91 000 9208 90 000 8705 10 000 9003 11 000 9016 00 900 9102 99 000 9209 10 000 8705 90 200 9003 19 000 9017 10 000 9103 10 000 9209 20 000 8705 90 900 9003 90 900 9017 90 000 9103 90 000 9209 30 000 8706 00 200 9004 10 000 9018 31 100 9104 00 000 9209 91 000 8706 00 900 9004 90 000 9019 10 100 9105 11 000 9209 92 000 8707 10 000 9005 10 000 9023 00 000 9105 19 000 9209 93 000 8707 90 900 9005 80 100 9025 11 000 9105 21 000 9209 94 000 8708 10 000 9005 80 900 9025 19 900 9105 29 000 9209 99 000 8708 21 000 9005 90 100 9025 80 900 9105 91 000 9301 00 000 8708 29 000 9005 90 900 9025 90 900 9105 99 000 9302 00 000 8708 31 000 9006 10 000 9026 10 100 9106 10 000 9303 10 000 8708 39 000 9006 20 000 9026 10 900 9106 20 000 9303 20 000 8708 40 000 9006 30 000 9026 20 100 9106 90 000 9303 30 000 8708 50 000 9006 40 000 9026 20 900 9107 00 100 9303 90 000 8708 60 000 9006 51 000 9026 80 100 9107 00 900 9304 00 000 8708 70 000 9006 52 000 9026 80 900 9108 11 000 9305 10 000 8708 80 000 9006 53 000 9026 90 100 9108 12 000 9305 21 000 8708 91 000 9006 59 000 9026 90 900 9108 19 000 9305 29 000 8708 92 000 9006 61 000 9027 40 900 9108 20 000 9305 90 000 8708 93 000 9006 62 000 9027 50 900 9108 91 000 9306 10 000 8708 94 000 9006 69 000 9027 80 900 9108 99 000 9306 21 900 8708 99 200 9006 91 000 9027 90 190 9109 11 000 9306 29 000 8708 99 400 9006 99 000 9027 90 990 9109 19 000 9306 30 900 8708 99 900 9007 11 000 9028 10 000 9109 90 000 9306 90 000 8709 90 000 9007 19 000 9028 20 000 9110 11 000 9307 00 000 8711 10 900 9007 20 100 9028 30 000 9110 12 000 9401 10 000 8711 20 900 9007 20 900 9028 90 000 9110 19 000 9501 00 000 8711 30 900 9007 91 000 9029 10 190 9110 90 000 9502 10 000 8711 40 900 9007 92 000 9029 10 900 9111 10 000 9502 91 000 8711 50 900 9008 10 000 9029 20 190 9111 20 000 9502 99 000 8711 90 900 9008 20 000 9029 20 900 9111 80 000 9503 10 000 8712 00 000 9008 30 000 9029 90 000 9111 90 000 9503 20 000 8714 11 000 9008 40 000 9030 83 900 9112 10 000 9503 30 000 9503 41 000 9506 21 000 9508 00 000 9608 31 000 9613 80 000 9503 49 000 9506 29 000 9601 10 000 9608 39 000 9613 90 000 9503 50 000 9506 31 000 9601 90 100 9608 40 000 9614 20 000 9603 60 000 9506 32 000 9601 90 900 9608 50 000 9614 90 000 9503 70 000 9506 39 000 9602 00 200 9608 60 000 9615 11 000 9503 80 000 9506 40 000 9602 00 900 9608 91 000 9615 19 000 9503 90 000 9506 51 000 9603 10 000 9608 99 900 9615 90 000 9504 10 000 9506 59 000 9603 21 000 9609 10 900 9616 20 000 9504 20 100 9506 61 000 9603 29 000 9609 20 000 9617 00 000 9504 20 900 9506 62 000 9603 30 000 9609 90 000 9618 00 000 9504 30 000 9506 69 000 9603 40 000 9610 00 000 9701 10 000 9504 40 000 9506 70 000 9603 50 000 9611 00 000 9701 90 000 9504 90 000 9506 91 000 9603 90 100 9612 10 000 9702 00 000 9505 10 000 9506 99 000 9603 90 900 9612 20 000 9703 00 000 9505 90 000 9507 10 000 9604 00 000 9613 10 000 9704 00 000 9506 11 000 9507 20 000 9605 00 000 9613 20 000 9705 00 900 9506 12 000 9507 30 000 9608 10 900 9613 30 000 9706 00 000 9506 19 000 9507 90 000 9608 20 000 Annex IV **LIST OF INDUSTRIAL PRODUCTS ORIGINATING** **IN THE COMMUNITY REFERRED TO IN ARTICLE 11(5)** 2103 20 000 5704 10 000 6115 99 900 6211 33 000 ex 870 331 000 <*> 2203 00 000 5705 00 000 6116 10 000 6211 39 000 ex 870 332 000 <*> 2203 00 100 6101 10 000 6116 91 000 6211 41 000 ex 870 333 000 <*> 2203 00 200 6101 90 000 6116 92 000 6211 43 000 ex 870 339 000 <*> 2203 00 900 6102 10 000 6116 93 000 6211 49 000 9401 20 000 2205 00 000 6102 30 000 6116 99 000 6212 20 000 9401 30 000 2205 10 000 6102 90 000 6117 10 000 6212 30 000 9401 40 000 2205 90 000 6103 12 000 6117 20 000 6212 90 000 9401 50 000 2402 00 000 6103 19 000 6117 80 000 6213 10 000 9401 61 000 2402 10 000 6103 21 000 6117 90 000 6213 20 000 9401 69 000 2402 20 000 6103 22 000 6201 13 000 6213 90 000 9401 71 000 2402 90 000 6103 23 000 6201 19 000 6216 00 000 9401 79 000 2402 90 200 6103 29 000 6201 99 000 6217 10 900 9401 80 000 2403 00 000 6103 39 000 6202 19 000 6217 90 000 9401 90 000 2403 10 000 6103 49 000 6202 91 000 6309 00 000 9402 10 100 2403 90 000 6104 12 000 6202 99 000 6309 00 100 9403 10 000 2403 91 000 6104 13 000 6205 90 000 6309 00 900 9403 20 000 2403 99 000 6104 23 000 6206 10 000 6401 10 000 9403 30 000 2403 99 200 6104 02 900 6206 40 000 6401 91 000 9403 40 000 2403 99 300 6104 31 000 6206 90 000 6401 92 000 9403 50 000 2403 99 900 6104 39 000 6207 11 000 6401 99 000 9403 60 000 5701 00 000 6104 44 000 6207 19 000 6402 12 000 9403 70 000 5701 10 000 6104 49 000 6207 22 000 6402 19 000 9403 80 000 5701 90 000 6104 59 000 6207 29 000 6402 20 000 9403 90 000 5702 00 000 6104 61 000 6207 92 000 6402 30 000 9404 10 000 5702 10 000 6104 69 000 6207 99 000 6402 91 000 9404 21 000 5702 20 000 6106 10 000 6208 11 000 6402 99 000 9404 29 000 5702 30 000 6108 11 000 6208 19 000 6405 10 000 9404 30 000 5702 31 000 6108 19 000 6208 21 000 6405 20 000 9404 90 000 5702 39 000 6108 29 000 6208 22 000 6405 90 000 9405 10 000 5702 40 000 6108 32 000 6208 29 000 6406 10 000 9405 20 000 5702 41 000 6108 39 000 6208 91 000 6406 20 000 9405 30 000 5702 49 000 6108 99 000 6208 92 000 6406 91 000 9405 40 900 5702 50 000 6110 90 000 6208 99 000 6406 99 100 9405 50 900 5702 51 000 6111 90 000 6209 10 000 6406 99 200 9405 60 000 5702 59 000 6112 20 000 6209 90 000 6406 99 910 9405 91 000 5702 90 000 6112 31 000 6210 10 000 6406 99 990 9405 92 000 5702 91 000 6112 39 000 6210 40 000 ex 8703 10 000 <*> 9405 99 000 5702 99 000 6112 41 000 6210 50 000 ex 8703 21 000 <*> 9406 00 190 5703 00 000 6112 49 000 6211 11 000 ex 8703 22 000 <*> 9406 00 200 5703 10 000 6113 00 000 6211 12 000 ex 8703 23 000 <*> 9406 00 300 5703 90 000 6114 10 000 6211 20 000 ex 8703 24 000 <*> 9406 00 900 5704 00 000 6114 90 000 6211 31 000 --- <*> Used vehicles defined as vehicles with more than six months after registration and having run at least 6000 km. Annex V **COMMUNITY RESERVATIONS LIST REFERRED TO IN ARTICLE 30(1)(B)** In some Member States, a concession may be required for mining and mineral rights for non-EC-controlled companies. Access to and use of the biological resources and fishing grounds situated in the maritime waters coming under the sovereignty or within the jurisdiction of Member States of the Community is restricted to fishing vessels flying the flag of a Community territory unless otherwise provided for. In some Member States, the purchase of real estate is subject to limitations. National treatment concerning production and distribution, including broadcasting and other forms of transmission to the public, may be reserved to audiovisual works meeting certain origin criteria. Reserved services In some Member States market access concerning complementary services and infrastructures is restricted. In some Member States national treatment is not applicable to non-EC-controlled companies which wish to undertake an agricultural enterprise. The acquisition of vineyards by non-EC-controlled companies is subject to notification, or, as necessary, authorisation. In some Member States limitations exist on foreign participation in publishing companies and broadcasting companies. Annex VI **JORDANIAN RESERVATIONS TO NATIONAL** **TREATMENT REFERRED TO IN ARTICLE 30(2)(A)** With the aim of improving the national treatment conditions in all sectors, the above list of reservations is subject to review within two years after the entry into force of the Agreement. - Non-Jordanian investors may own no more than 50% of any project or economic activity in the following sectors: (a) construction contracting; (b) trade and trade services; (c) mining; - Non-Jordanian investors may purchase securities listed on the Amman financial market in Jordanian currency, provided that the funds are transferred from a convertible foreign currency. - Non-Jordanian ownership in a public share-holding company may not exceed 50% unless the percentage of non-Jordanian ownership was more than 50% at the time of closing of subscription, in which case the maximum limit on non-Jordanian ownership shall be fixed at that percentage. - The minimum amount of non-Jordanian investment in any project shall be JOD 100000 (one hundred thousand Jordanian dinars), except for investment in the Amman financial market, where the minimum investment amount shall be JOD 1000 (one thousand Jordanian dinars). The purchase, sale or rental of immovable assets by a non-Jordanian is subject to the prior consent of the Cabinet of Ministers. Annex VII **INTELLECTUAL, INDUSTRIAL AND COMMERCIAL**
**PROPERTY REFERRED TO IN ARTICLE 56**
1. By the end of the fifth year after the entry into force of the Agreement, Jordan shall accede to the following multilateral conventions on property rights: - Berne Convention for the protection of literary and artistic works (Paris Act 1971), - the Convention for the Protection of Performers, Producers of Phonograms and Broadcasting Organisations (Rome, 1961), - Nice Agreement concerning the International Classification of Goods and Services for the Purposes of the Registration of Marks (Geneva Act 1977 and amended in 1979), - Madrid Agreement concerning the International Registration of Marks (Stockholm Act 1967 and amended in 1979), - Protocol relating to the Madrid Agreement concerning the International Registration of Marks (Madrid 1989), - Budapest Treaty on the International Recognition of the Deposit of Micro-organisms for the Purposes of Patent Procedure (1977, modified in 1980), - the International Convention for Protection of New Varieties of Plants (UPOV) (Geneva Act 1991). 2. Not later than the seventh year after the entry into force of the Agreement, Jordan shall accede to the following multilateral conventions: - Patent Cooperation Treaty (Washington 1970, amended in 1979 and modified in 1984). 3. Jordan undertakes to provide for adequate and effective protection of patents for chemicals and pharmaceuticals in line with Articles 27 to 34 of the WTO Agreement on trade-related aspects of intellectual property rights, by the end of the third year from the entry into force of this Agreement or from its accession to the WTO, whichever is the earlier. 4. The Association Council may decide that paragraphs 1, 2 and 3 shall apply to other multilateral conventions in this field. 5. The Parties confirm the importance they attach to the obligations arising from the following multilateral convention: - the Paris Convention for the Protection of Industrial Property (Stockholm Act 1967, amended in 1979). **PROTOCOL 1** **CONCERNING THE ARRANGEMENTS APPLICABLE** **TO THE IMPORTATION INTO THE COMMUNITY OF AGRICULTURAL** **PRODUCTS ORIGINATING IN JORDAN** 1. The products listed in the Annex, originating in Jordan, shall be admitted for importation into the Community, according to the conditions contained herein and in the Annex. 2. (a) Customs duties shall be either eliminated or reduced as indicated in column A. (b) For certain products, for which the Common Customs Tariff provides for the application of an ad valorem duty and a specific duty, the rates of reduction, indicated in columns A and C, shall apply only to the ad valorem duty. 3. For certain products, customs duties shall be eliminated within the limit of the tariff quotas listed in column В for each of them. For the quantities imported in excess of the quotas, the common customs duties shall, according to the product concerned, be applied in full or reduced, as indicated in column C. 4. For some products indicated in paragraph 3 and in column D, the tariff quotas shall be increased from the entry into force of this Agreement on the basis of four equal annual instalments, each corresponding to 3% of these amounts. 5. For some products indicated in column D, the Community may fix a reference quantity if, in the light of the annual review of trade flows which it shall carry out, it establishes that the volume of imports of a product or products threatens to cause difficulties on the Community market. Should the volume of imports of one of the products exceed the reference quantity, the Community may make the product in question subject to a tariff quota, the volume of which shall be equal to the reference quantity. For quantities imported in excess of the quota, the customs duty shall, according to the product concerned, be applied in full or reduced, as indicated in column C.
CN code <1>Description <2>Reduction of the MFN customs duty <3>Tariff quota volume tReduction of the customs duty beyond the current or possible tariff quotSpecific provisions
ABCD
ex 0406 90 33 ex 0406 90 50White cheese of sheep milk100100
0601 10Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, dormant100Subject to the provisions of Protocol 1(5)
0602 40Roses, grafted or not100100
0603 10Cut flowers, fresh100100Subject to compliance with the conditions agreed upon by Exchange of Letters
ex 0701 90 51New potatoes, from 1 January to 31 March1001000
0702 00 15 ex 0702 00 45Tomatoes, from 1 December to 31 March10060Subject to the provisions of Protocol
0702 00 501(5)
ex 0703 10Onions and shallots, from 1 February to 30 April100
ex 0703 20 00Garlic, from 1 February to 31 May10050Subject to the provisions of Protocol 1(5)
0705 11 05 ex 0705 11 10 ex 0705 11 80Cabbage lettuce, from 1 November to 31 March100200
ex 0706 10 00Carrots, from 1 January to 31 March100
0707 00 10Cucumbers less100
0707 00 40than 15 cm long, from 10 November to end February
ex 0708 20 20 ex 0708 20 95Beans, from 1 November to 30 April10060Subject to the provisions of Protocol 1(5)
ex 0709 20 00Asparagus, from 1 October to 31 March100100
ex 0709 30 00Aubergines, from 1 December to 30 April10060Subject to the provisions of Protocol 1(5)
ex 0709 40 00Celery, from 1 January to 31 March100
ex 0709 60 10Sweet peppers, from 15 November to 30 April10040Subject to the provisions of Protocol
0709 60 99Fruits of the genus capsicum or of the genus pimenta, other1001(5)
0709 90 71 ex 0709 90 73 ex 0709 90 79Courgettes, from 1 December to 15 March10060Subject to the provisions of Protocol 1(5)
ex 0709 90 90Parsley, from 1 November to 31 May100
ex 0709 90 90Molochia100
ex 0709 90 50Fennel, from 1 November to 31 March
ex 0710 80 95Okra100
0710 80 59Other fruits of the genus capsicum or of the genus pimenta100
ex 0713Dried leguminous vegetables, other than for sowing10080Subject to the provisions of Protocol 1(5)
0804 10Dates100
ex 0804 20Figs, from 20 May to 1 September40
ex 0804 50 00Mangoes and guavas40
ex 0805 10Oranges, fresh10060Subject to the provisions of Protocol 1(5)
ex 0805 20Mandarins, fresh100100060
ex 0805 30Lemons, fresh100100040
0805 40Grapefruit10080Subject to the provisions of Protocol 1(5)
ex 0806 10 29Table grapes, fresh, from 1 February to 11 July100Subject to the provisions of Protocol 1(5)
ex 0807 19 00Melons of a weight less than 600 grammes, from 1 November to 31 May100Subject to the provisions of Protocol 1(5)
ex 0807 11 00Watermelons, fresh, from 1 April to 15 June100
ex 0810 10 05Strawberries, from 1 January to 31 March100100
ex 0810 90 85Pomegranate, from 1 August to 30 September100
0814 00 00Peel of citrus fruit or melons100
0904 20 39Fruits of the genus capsicum or of the genus pimenta, neither crushed nor ground, other100
2001 exceptPreparations of vegetables1001000Subject to the
2001 90 50,provisions
2001 90 30,of Protocol
2001 90 40 and1(4)
2001 90 60
2004 except
2004 10 91 and
2004 90 10
2005 except
2005 60,
2005 20 10 and
2005 80 00
2007Preparations of fruits1001000Subject to the
2008 exceptprovisions
2008 11 10,of Protocol
2008 91 00,1(4)
2008 40,
2008 70,
2008 99 85 and
2008 99 91,
2009 except
2009 11
2009 19,
2009 20 and
2009 30
2002 90 31Tomato concentrate1004000Subject to the
2002 90 39provisions
2002 90 91of Protocol
2002 90 991(4). The tariff quota refers to a dry matter of 28% to 30%; for its management, the coefficients provided for in Annex V(1) of Regulation No. 1709/84 will be used
<1> CN codes corresponding to Regulation (EC) No. 1734/96 (OJ L 238,
19.9.1996, p. 1).
<2> Notwithstanding the rules for interpretation of the Combined
Nomenclature, the wording for the description of the products is to be considered as having no more than an indicative value, the preferential scheme being determined, within the context of this Annex, by the coverage of the CN codes. Where "ex" CN codes are indicated, the preferential scheme is to be determined by the application of the CN codes and corresponding description taken together.
<3> Duty reduction only applies to "ad valorem" customs duties, except to those applicable in the framework of erga omnes tariff quotas. For
the products corresponding to the codes: 0406 90 33 and 0406 90 50 the duty reduction applies to the specific duty.
**PROTOCOL 2** **CONCERNING THE ARRANGEMENTS APPLICABLE** **TO THE IMPORTATION INTO JORDAN OF AGRICULTURAL PRODUCTS** **ORIGINATING IN THE COMMUNITY** 1. The products listed in the Annex originating in the Community shall be admitted for importation into Jordan according to the conditions contained hereafter and in the Annex. 2. Import duties and charges having an equivalent effect shall not be higher than those indicated in column A. | CN code | Description | Duty % or specific duty | | --- | --- | --- | | 0102 10 | Pure-bred live breeding animals | JOD 10/head | | 0102 90 | Other live bovine animals | JOD 10/head | | 0201 20 | Fresh meat of bovine animals, with bones | 5 | | 0201 30 | Fresh meat of bovine animals, boneless | 5 | | 0202 30 | Frozen meat of bovine animals, boneless | 5 | | 0405 00 | Butter/fats/oil derived from milk; dairy spreads | 5 | | 0406 30 | Processed cheese, not grated or powdered | 20 | | 0701 10 | Potato seed, fresh | 5 | | 0713 10 | Peas, dried | 10 | | 0713 50 | Broad beans, dried | 5 | | 1002 10 | Durum wheat | 0 | | 1001 90 | Other wheat | 0 | | 1003 00 | Barley | 5 | | 1005 90 | Maize, other than seed | 5 | | 1006 30 | Semi/wholly milled rice | 5 | | 1001 00 | Wheat or meslin flour | 0 | | 1103 11 10 | Groats and meal of durum wheat | 15 | | 1103 13 | Cereal groats, meal and pellets of maize | 10 | | 1107 10 | Malt, not roasted | 10 | | 2005 70 | Preserved olives | 40 | | 2008 70 | Peaches, prepared or preserved | 40 | | 2301 10 | Flours, meals and pellets of meat/offal | 5 | | 2301 20 | Flours, meals and pellets offish and aquatic invertebrates | 5 | | 2304 00 | Oilcake/residues deriving from soya oil | 5 | | 2309 90 | Preparations of a kind used in animal feeding, other than cat or dog | 10 | **PROTOCOL 3** **CONCERNING THE DEFINITION** **OF THE CONCEPT OF "ORIGINATING PRODUCTS"** **AND METHODS OF ADMINISTRATIVE COOPERATION**
Article 1
Definitions For the purposes of this Protocol: (a) "manufacture": means any kind of working or processing including assembly or specific operations; (b) "material": means any ingredient, raw material, component or part, etc., used in the manufacture of the product; (c) "product": means the product being manufactured, even if it is intended for later use in another manufacturing operation; (d) "goods": means both materials and products; (e) "customs value": means the value as determined in accordance with the 1994 Agreement on implementation of Article VII of the General Agreement on Tariffs and Trade (WTO Agreement on customs valuation); (f) "ex-works price": means the price paid for the product ex-works to the manufacturer in the Community or Jordan in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported; (g) "value of materials": means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the Community or Jordan; (h) "value of originating materials": means the value of such materials as defined in subparagraph (g) applied mutatis mutandis; (i) "added value": shall be taken to be the ex-works price minus the customs value of each of the products incorporated which did not originate in the country in which those products were obtained; (j) "chapters" and "headings": mean the chapters and the headings (four-digit codes) used in the nomenclature which makes up the harmonised commodity description and coding system, referred to in this Protocol as "the Harmonised System" or "HS"; (k) "classified": refers to the classification of a product or material under a particular heading; (1) "consignment": means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice; (m) "territories": includes territorial waters.
Article 2
General requirements 1. For the purpose of implementing this Agreement, the following products shall be considered as originating in the Community: (a) products wholly obtained in the Community within the meaning of Article 4 of this Protocol; (b) products obtained in the Community incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in the Community within the meaning of Article 5 of this Protocol. 2. For the purpose of implementing this Agreement, the following products shall be considered as originating in Jordan: (a) products wholly obtained in Jordan within the meaning of Article 4 of this Protocol; (b) products obtained in Jordan incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in Jordan within the meaning of Article 5 of this Protocol.
Article 3
Bilateral cumulation of origin 1. Materials originating in the Community shall be considered as materials originating in Jordan when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond that referred to in Article 6(1) of this Protocol. 2. Materials originating in Jordan shall be considered as materials originating in the Community when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond that referred to in Article 6(1) of this Protocol.
Article 4
Wholly obtained products 1. The following shall be considered as wholly obtained in the Community or Jordan: (a) mineral products extracted from their soil or from their seabed; (b) vegetable products harvested there; (c) live animals born and raised there; (d) products from live animals raised there; (e) products obtained by hunting or fishing conducted there; (f) products of sea fishing and other products taken from the sea outside the territorial waters of the Community or Jordan by their vessels; (g) products made aboard their factory ships exclusively from products referred to in subparagraph (f); (h) used articles collected there fit only for the recovery of raw materials, including used tyres fit only for retreading or for use as waste; (i) waste and scrap resulting from manufacturing operations conducted there; (j) products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil; (k) goods produced there exclusively from the products specified in subparagraphs (a) to (j). 2. The terms "their vessels" and "their factory ships" in paragraph 1 (f) and (g) shall apply only to vessels and factory ships: (a) which are registered or recorded in an EC Member State or in Jordan; (b) which sail under the flag of an EC Member State or of Jordan; (c) which are owned to an extent of at least 50% by nationals of EC Member States or of Jordan, or by a company with its head office in one of these States, of which the manager or managers, Chairman of the Board of Directors or the Supervisory Board, and the majority of the members of such boards are nationals of EC Member States or of Jordan and of which, in addition, in the case of partnerships or limited companies, at least half the capital belongs to those States or to public bodies or nationals of the said States; (d) of which the master and officers are nationals of EC Member States or of Jordan; and (e) of which at least 75% of the crew are nationals of EC Member States or of Jordan.
Article 5
Sufficiently worked or processed products 1. For the purposes of Article 2, products which are not wholly obtained are considered to be sufficiently worked or processed when the conditions set out in the list in Annex II are fulfilled. The conditions referred to above indicate, for all products covered by this Agreement, the working or processing which must be carried out on non-originating materials used in manufacturing and apply only in relation to such materials. Accordingly, it follows that if a product, which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture. 2. Notwithstanding paragraph 1, non-originating materials which, according to the conditions set out in the list, should not be used in the manufacture of a product may nevertheless be used, provided that: (a) their total value does not exceed 10% of the ex-works price of the product; (b) any of the percentages given in the list for the maximum value of non-originating materials are not exceeded through the application of this paragraph. This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonised System. 3. Paragraphs 1 and 2 shall apply except as provided in Article 6.
Article 6
Insufficient working or processing operations 1. Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 5 are satisfied: (a) operations to ensure the preservation of products in good condition during transport and storage (ventilation, spreading out, drying, chilling, placing in salt, sulphur dioxide or other aqueous solutions, removal of damaged parts, and like operations); (b) simple operations consisting of removal of dust, sifting or screening, sorting, classifying, matching (including the making-up of sets of articles), washing, painting, cutting up; (c) (i) changes of packaging and breaking up and assembly of packages; (ii) simple placing in bottles, flasks, bags, cases, boxes, fixing on cards or boards, etc., and all other simple packaging operations; (d) affixing marks, labels and other like distinguishing signs on products or their packaging; (e) simple mixing of products, whether or not of different kinds, where one or more components of the mixtures does not meet the conditions laid down in this Protocol to enable them to be considered as originating in the Community or Jordan; (f) simple assembly of parts to constitute a complete product; (g) a combination of two or more operations specified in subparagraphs (a) to (f); (h) slaughter of animals. 2. All the operations carried out in either the Community or Jordan on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.
Article 7
Unit of qualification 1. The unit of qualification for the application of the provisions of this Protocol shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System. Accordingly, it follows that: (a) when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole constitutes the unit of qualification; (b) when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product must be taken individually when applying the provisions of this Protocol. 2. Where, under general rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.
Article 8
Accessories, spare parts and tools Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.
Article 9
Sets Sets, as defined in general rule 3 of the Harmonised System, shall be regarded as originating when all component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15% of the ex-works price of the set.
Article 10
Neutral elements In order to determine whether a product originates, it shall not be necessary to determine the origin of the following which might be used in its manufacture: (a) energy and fuel; (b) plant and equipment; (c) machines and tools; (d) goods which do not enter and which are not intended to enter into the final composition of the product.
Article 11
Principle of territoriality 1. The conditions set out in Title II relative to the acquisition of originating status must be fulfilled without interruption in the Community or Jordan. 2. If originating goods exported from the Community or Jordan to another country are returned, they must be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that: (a) the goods returned are the same goods as those exported; and (b) they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.
Article 12
Direct transport 1. The preferential treatment provided for under the Agreement applies only to products, satisfying the requirements of this Protocol, which are transported directly between the Community and Jordan. However, products constituting one single consignment may be transported through other territories with, should the occasion arise, transhipment or temporary warehousing in such territories, provided that they remain under the surveillance of the customs authorities in the country of transit or warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition. Originating products may be transported by pipeline across territory other than that of the Community or Jordan. 2. Evidence that the conditions set out in paragraph 1 have been fulfilled shall be supplied to the customs authorities of the importing country by the production of: (a) a single transport document covering the passage from the exporting country through the country of transit; or (b) a certificate issued by the customs authorities of the country of transit: (i) giving an exact description of the products; (ii) stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used; and (iii) certifying the conditions under which the products remained in the transit country; or (с) failing these, any substantiating documents.
Article 13
Exhibitions 1. Originating products, sent for exhibition in another country and sold after the exhibition for importation in the Community or Jordan shall benefit on importation from the provisions of the Agreement provided it is shown to the satisfaction of the customs authorities that: (a) an exporter has consigned these products from the Community or Jordan to the country in which the exhibition is held and has exhibited them there; (b) the products have been sold or otherwise disposed of by that exporter to a person in the Community or Jordan; (c) the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition; and (d) the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition. 2. A proof of origin must be issued or made out in accordance with the provisions of Title V and submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required. 3. Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products, and during which the products remain under customs control.
Article 14 Prohibition of drawback of,
or exemption from, customs duties 1. Non-originating materials used in the manufacture of products originating in the Community or in Jordan for which a proof of origin is issued or made out in accordance with the provisions of Title V shall not be subject in the Community or Jordan to drawback of, or exemption from, customs duties of whatever kind. 2. The prohibition in paragraph 1 shall apply to any arrangement for refund, remission or non-payment, partial or complete, of customs duties or charges having an equivalent effect, applicable in the Community or Jordan to materials used in the manufacture, where such refund, remission or non-payment applies, expressly or in effect, when products obtained from the said materials are exported and not when they are retained for home use there. 3. The exporter of products covered by a proof of origin shall be prepared to submit at any time, upon request from the customs authorities, all appropriate documents proving that no drawback has been obtained in respect of the non-originating materials used in the manufacture of the products concerned and that all customs duties or charges having equivalent effect applicable to such materials have actually been paid. 4. The provisions of paragraphs 1 to 3 shall also apply in respect of packaging within the meaning of Article 7(2), accessories, spare parts and tools within the meaning of Article 8 and products in a set within the meaning of Article 9 when such items are non-originating. 5. The provisions of paragraphs 1 to 4 shall apply only in respect of materials which are of the kind to which the Agreement applies. Furthermore, they shall not preclude the application of an export refund system for agricultural products, applicable upon export in accordance with the provisions of the Agreement. 6. The provisions of this Article shall not apply for four years following the entry into force of the Agreement. These provisions may be reviewed by common accord.
Article 15
General requirements 1. Products originating in the Community shall, on importation into Jordan and products originating in Jordan shall, on importation into the Community benefit from this Agreement upon submission of either: (a) a movement certificate EUR.1, a specimen of which appears in Annex III; or (b) in the cases specified in Article 20(1), a declaration, the text of which appears in Annex IV, given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified (hereinafter referred to as the "invoice declaration"). 2. Notwithstanding paragraph 1, originating products within the meaning of this Protocol shall, in the cases specified in Article 25, benefit from this Agreement without it being necessary to submit any of the documents referred to above.
Article 16
Procedure for the issue of a movement certificate EUR.1 1. A movement certificate EUR.1 shall be issued by the customs authorities of the exporting country on application having been made in writing by the exporter or, under the exporter's responsibility, by his authorised representative. 2. For this purpose, the exporter or his authorised representative shall fill out both the movement certificate EUR.1 and the application form, specimens of which appear in Annex III. These forms shall be completed in one of the languages in which this Agreement is drawn up and in accordance with the provisions of the domestic law of the exporting country. If they are handwritten, they shall be completed in ink in printed characters. The description of the products must be given in the box reserved for this purpose without leaving any blank lines. Where the box is not completely filled, a horizontal line must be drawn below the last line of the description, the empty space being crossed through. 3. The exporter applying for the issue of a movement certificate EUR.1 shall be prepared to submit at any time, at the request of the customs authorities of the exporting country where the movement certificate EUR.1 is issued, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this Protocol. 4. A movement certificate EUR.1 shall be issued by the customs authorities of an EC Member State or Jordan if the products concerned can be considered as products originating in the Community or Jordan and fulfil the other requirements of this Protocol. 5. The issuing customs authorities shall take any steps necessary to verify the originating status of the products and the fulfilment of the other requirements of this Protocol. For this purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate. The issuing customs authorities shall also ensure that the forms referred to in paragraph 2 are duly completed. In particular, they shall check whether the space reserved for the description of the products has been completed in such a manner as to exclude all possibility of fraudulent additions. 6. The date of issue of the movement certificate EUR.1 shall be indicated in box 11 of the certificate. 7. A movement certificate EUR.1 shall be issued by the customs authorities and made available to the exporter as soon as actual exportation has been effected or ensured.
Article 17
Movement certificates EUR.1 issued retrospectively 1. Notwithstanding Article 16(7), a movement certificate EUR.1 may exceptionally be issued after exportation of the products to which it relates if: (a) it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances; or (b) it is demonstrated to the satisfaction of the customs authorities that a movement certificate EUR.1 was issued but was not accepted at importation for technical reasons. 2. For the implementation of paragraph 1, the exporter must indicate in his application the place and date of exportation of the products to which the movement certificate EUR.1 relates, and state the reasons for his request. 3. The customs authorities may issue a movement certificate EUR.1 retrospectively only after verifying that the information supplied in the exporter's application agrees with that in the corresponding file. 4. Movement certificates EUR.1 issued retrospectively must be endorsed with one of the following phrases: "NACHTRAGLICH AUSGESTELLT", "DELIVRE A POSTERIORI", "RILASCIATO A POSTERIORI", "AFGEGEVEN A POSTERIORI", "ISSUED RETROSPECTIVELY", "UDSTEDT EFTERFOLGENDE", <*>, "EXPEDIDO A POSTERIORI", "EMITIDO A POSTERIORI", "ANNETTU IALKIKATEEN", "UTFARDAT I EFTERHAND", <*>. --- <*> Текст на национальном языке не приводится. 5. The endorsement referred to in paragraph 4 shall be inserted in the "Remarks" box of the movement certificate EUR.1.
Article 18
Issue of a duplicate movement certificate EUR.1 1. In the event of theft, loss or destruction of a movement certificate EUR.1, the exporter may apply to the customs authorities which issued it for a duplicate made out on the basis of the export documents in their possession. 2. The duplicate issued in this way must be endorsed with one of the following words: "DUPLIKAT", "DUPLICATA", "DUPLICATO", "DUPLICAAT", "DUPLICATE", "АNTIГРАФО", "DUPLICADO", "SEGUNDA VIA", "KAKSOISKAPPALE", <*>. --- <*> Текст на национальном языке не приводится. 3. The endorsement referred to in paragraph 2 shall be inserted in the "Remarks" box of the duplicate movement certificate EUR.1. 4. The duplicate, which must bear the date of issue of the original movement certificate EUR.1, shall take effect as from that date.
Article 19 Issue of movement certificates EUR.1
on the basis of a proof of origin
issued or made out previously When originating products are placed under the control of a customs office in the Community or Jordan, it shall be possible to replace the original proof of origin by one or more movement certificates EUR.1 for the purpose of sending all or some of these products elsewhere within the Community or Jordan. The replacement movement certificate(s) EUR.1 shall be issued by the customs office under whose control the products are placed.
Article 20
Conditions for making out an invoice declaration 1. An invoice declaration as referred to in Article 15(l)(b) may be made out: (a) by an approved exporter within the meaning of Article 21; or (b) by any exporter for any consignment consisting of one or more packages containing originating products whose total value does not exceed ECU 6000. 2. An invoice declaration may be made out if the products concerned can be considered as products originating in the Community or Jordan and fulfil the other requirements of this Protocol. 3. The exporter making out an invoice declaration shall be prepared to submit at any time, at the request of the customs authorities of the exporting country, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this Protocol. 4. An invoice declaration shall be made out by the exporter by typing, stamping or printing on the invoice, the delivery note or another commercial document, the declaration, the text of which appears in Annex IV, using one of the linguistic versions set out in that Annex and in accordance with the provisions of the domestic law of the exporting country. If the declaration is handwritten, it shall be written in ink in printed characters. 5. Invoice declarations shall bear the original signature of the exporter in manuscript. However, an approved exporter within the meaning of Article 21 shall not be required to sign such declarations provided that he gives the customs authorities of the exporting country a written undertaking that he accepts full responsibility for any invoice declaration which identifies him as if it had been signed in manuscript by him. 6. An invoice declaration may be made out by the exporter when the products to which it relates are exported, or after exportation on condition that it is presented in the importing country no longer than two years after the importation of the products to which it relates.
Article 21
Approved exporter 1. The customs authorities of the exporting country may authorise any exporter who makes frequent shipments of products under this Agreement to make out invoice declarations irrespective of the value of the products concerned. An exporter seeking such authorisation must offer to the satisfaction of the customs authorities all guarantees necessary to verify the originating status of the products as well as the fulfilment of the other requirements of this Protocol. 2. The customs authorities may grant the status of approved exporter subject to any conditions which they consider appropriate. 3. The customs authorities shall grant to the approved exporter a customs authorisation number which shall appear on the invoice declaration. 4. The customs authorities shall monitor the use of the authorisation by the approved exporter. 5. The customs authorities may withdraw the authorisation at any time. They shall do so where the approved exporter no longer offers the guarantees referred to in paragraph 1, does not fulfil the conditions referred to in paragraph 2 or otherwise makes an incorrect use of the authorisation.
Article 22
Validity of proof of origin 1. A proof of origin shall be valid for four months from the date of issue in the exporting country, and must be submitted within the said period to the customs authorities of the importing country. 2. Proofs of origin which are submitted to the customs authorities of the importing country after the final date for presentation specified in paragraph 1 may be accepted for the purpose of applying preferential treatment, where the failure to submit these documents by the final date set is due to exceptional circumstances. 3. In other cases of belated presentation, the customs authorities of the importing country may accept the proofs of origin where the products have been submitted before the said final date.
Article 23
Submission of proof of origin Proofs of origin shall be submitted to the customs authorities of the importing country in accordance with the procedures applicable in that country. The said authorities may require a translation of a proof of origin and may also require the import declaration to be accompanied by a statement from the importer to the effect that the products meet the conditions required for the implementation of the Agreement.
Article 24
Importation by instalments Where, at the request of the importer and on the conditions laid down by the customs authorities of the importing country; dismantled or non-assembled products within the meaning of general rule 2(a) of the Harmonised System falling within sections XVI and XVII or heading Nos. 7308 and 9406 of the Harmonised System are imported by instalments, a single proof of origin for such products shall be submitted to the customs authorities upon importation of the first instalment.
Article 25
Exemptions from proof of origin 1. Products sent as small packages from private persons to private persons or forming part of travellers' personal luggage shall be admitted as originating products without requiring the submission of a proof of origin, provided that such products are not imported by way of trade and have been declared as meeting the requirements of this Protocol and where there is no doubt as to the veracity of such a declaration. In the case of products sent by post, this declaration can be made on the customs declaration C2/CP3 or on a sheet of paper annexed to that document. 2. Imports which are occasional and consist solely of products for the personal use of the recipients or travellers or their families shall not be considered as imports by way of trade if it is evident from the nature and quantity of the products that no commercial purpose is in view. 3. Furthermore, the total value of these products shall not exceed ECU 500 in the case of small packages or ECU 1200 in the case of products forming part of travellers' personal luggage.
Article 26
Supporting documents The documents referred to in Articles 16(3) and 20(3) used for the purpose of proving that products covered by a movement certificate EUR.1 or an invoice declaration can be considered as products originating in the Community or in Jordan and fulfil the other requirements of this Protocol may consist, inter alia, of the following: (a) direct evidence of the processes carried out by the exporter or supplier to obtain the goods concerned, contained for example in his accounts or internal bookkeeping; (b) documents proving the originating status of materials used, issued or made out in the Community or Jordan where these documents are used in accordance with domestic law; (c) documents proving the working or processing of materials in the Community or Jordan, issued or made out in the Community or Jordan, where these documents are used in accordance with domestic law; (d) movement certificates EUR.1 or invoice declarations proving the originating status of materials used, issued or made out in the Community or Jordan in accordance with this Protocol.
Article 27
Preservation of proof of origin and supporting documents 1. The exporter applying for the issue of a movement certificate EUR.1 shall keep for at least three years the documents referred to in Article 16(3). 2. The exporter making out an invoice declaration shall keep for at least three years a copy of this invoice declaration as well as the documents referred to in Article 20(3). 3. The customs authorities of the exporting country issuing a movement certificate EUR.1 shall keep for at least three years the application form referred to in Article 16(2). 4. The customs authorities of the importing country shall keep for at least three years the movement certificates EUR.1 and the invoice declarations submitted to them.
Article 28
Discrepancies and formal errors 1. The discovery of slight discrepancies between the statements made in the proof of origin and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the products shall not ipso facto render the proof of origin null and void if it is duly established that this document does correspond to the products submitted. 2. Obvious formal errors such as typing errors on a proof of origin should not cause this document to be rejected if these errors are not such as to create doubts concerning the correctness of the statements made in this document.
Article 29
Amounts expressed in ECU 1. Amounts in the national currency of the exporting country equivalent to the amounts expressed in ECU shall be fixed by the exporting country and communicated to the importing countries through the Commission of the European Communities. 2. When the amounts exceed the corresponding amounts fixed by the importing country, the latter shall accept them if the products are invoiced in the currency of the exporting country. When the products are invoiced in the currency of another EC Member State, the importing country shall recognise the amount notified by the country concerned. 3. The amounts to be used in any given national currency shall be the equivalent in that national currency of the amounts expressed in ECU as at the first working day in October 1996. 4. The amounts expressed in ECU and their equivalents in the national currencies of the EC Member States and Jordan shall be reviewed by the Association Committee at the request of the Community or Jordan. When carrying out this review, the Association Committee shall ensure that there will be no decrease in the amounts to be used in any national currency and shall furthermore consider the desirability of preserving the effects of the limits concerned in real terms. For this purpose, it may decide to modify the amounts expressed in ECU.
Article 30
Mutual assistance 1. The customs authorities of the EC Member States and of Jordan shall provide each other, through the Commission of the European Communities, with specimen impressions of stamps used in their customs offices for the issue of movement certificates EUR.1 and with the addresses of the customs authorities responsible for verifying those certificates and invoice declarations. 2. In order to ensure the proper application of this Protocol, the Community and Jordan shall assist each other, through the competent customs administrations, in checking the authenticity of the movement certificates EUR.1 or the invoice declarations and the correctness of the information given in these documents.
Article 31
Verification of proofs of origin 1. Subsequent verifications of proofs of origin shall be carried out at random or whenever the customs authorities of the importing country have reasonable doubts as to the authenticity of such documents, the originating status of the products concerned or the fulfilment of the other requirements of this Protocol. 2. For the purposes of implementing the provisions of paragraph 1, the customs authorities of the importing country shall return the movement certificate EUR.1 and the invoice, if it has been submitted, the invoice declaration, or a copy of these documents, to the customs authorities of the exporting country giving, where appropriate, the reasons for the enquiry. Any documents and information obtained suggesting that the information given on the proof of origin is incorrect shall be forwarded in support of the request for verification. 3. The verification shall be carried out by the customs authorities of the exporting country. For this purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate. 4. If the customs authorities of the importing country decide to suspend the granting of preferential treatment to the products concerned while awaiting the results of the verification, release of the products shall be offered to the importer subject to any precautionary measures judged necessary. 5. The customs authorities requesting the verification shall be informed of the results of this verification as soon as possible. These results must indicate clearly whether the documents are authentic and whether the products concerned can be considered as products originating in the Community or in Jordan and fulfil the other requirements of this Protocol. 6. If in cases of reasonable doubt there is no reply within 10 months of the date of the verification request or if the reply does not contain sufficient information to determine the authenticity of the document in question or the real origin of the products, the requesting customs authorities shall, except in exceptional circumstances, refuse entitlement to the preferences.
Article 32
Dispute settlement Where disputes arise in relation to the verification procedures of Article 31 which cannot be settled between the customs authorities requesting a verification and the customs authorities responsible for carrying out this verification or where they raise a question as to the interpretation of this Protocol, they shall be submitted to the Association Committee. In all cases the settlement of disputes between the importer and the customs authorities of the importing country shall be under the legislation of the said country.
Article 33
Penalties Penalties shall be imposed on any person who draws up, or causes to be drawn up, a document which contains incorrect information for the purpose of obtaining a preferential treatment for products.
Article 34
Free zones 1. The Community and Jordan shall take all necessary steps to ensure that products traded under cover of a proof of origin which in the course of transport use a free zone situated in their territory, are not substituted by other goods and do not undergo handling other than normal operations designed to prevent their deterioration. 2. By means of an exemption to the provisions contained in paragraph 1, when products originating in the Community or Jordan are imported into a free zone under cover of a proof of origin and undergo treatment or processing, the authorities concerned shall issue a new EUR.1 certificate at the exporter's request, if the treatment or processing undergone is in conformity with the provisions of this Protocol.
Article 35
Application of the Protocol 1. The term "Community" used in Article 2 does not cover Ceuta and Melilla. 2. Products originating in Jordan, when imported into Ceuta or Melilla, shall enjoy in all respects the same customs regime as that which is applied to products originating in the customs territory of the Community under Protocol 2 of the Act of Accession of the Kingdom of Spain and the Portuguese Republic to the European Communities. Jordan shall grant to imports of products covered by the Agreement and originating in Ceuta and Melilla the same customs regime as that which is granted to products imported from and originating in the Community. 3. For the purpose of the application of paragraph 2 concerning products originating in Ceuta and Melilla, this Protocol shall apply mutatis mutandis subject to the special conditions set out in Article 36.
Article 36
Special conditions 1. Providing they have been transported directly in accordance with the provisions of Article 12, the following shall be considered as: 1. products originating in Ceuta and Melilla: (a) products wholly obtained in Ceuta and Melilla; (b) products obtained in Ceuta and Melilla in the manufacture of which products other than those referred to in (a) are used, provided that: (i) the said products have undergone sufficient working or processing within the meaning of Article 5 of this Protocol; or that (ii) those products are originating in Jordan or in the Community within the meaning of this Protocol, provided that they have been submitted to working or processing which goes beyond the insufficient working or processing referred to in Article 6(1). 2. products originating in Jordan: (a) products wholly obtained in Jordan; (b) products obtained in Jordan, in the manufacture of which products other than those referred to in (a) are used, provided that: (i) the said products have undergone sufficient working or processing within the meaning of Article 5 of this Protocol; or that (ii) those products are originating in Ceuta and Melilla or in the Community within the meaning of this Protocol, provided that they have been submitted to working or processing which goes beyond the insufficient working or processing referred to in Article 6(1). 2. Ceuta and Melilla shall be considered as a single territory. 3. The exporter or his authorised representative shall enter "Jordan" and "Ceuta and Melilla" in box 2 of movement certificates EUR.1 or on invoice declarations. In addition, in the case of products originating in Ceuta and Melilla, this shall be indicated in box 4 of movement certificates EUR.1 or on invoice declarations. 4. The Spanish customs authorities shall be responsible for the application of this Protocol in Ceuta and Melilla.
Article 37
Amendments to the Protocol The Association Committee may decide to amend the provisions of this Protocol.
Article 38
Implementation of the Protocol The Community and Jordan shall each take the steps necessary to implement this Protocol.
Article 39
Goods in transit or storage The provisions of the Agreement may be applied to goods which comply with the provisions of this Protocol and which on the date of entry into force of the Agreement are either in transit or are in the Community or in Jordan or, in temporary storage in bonded warehouses or in free zones, subject to the submission to the customs authorities of the importing State, within four months of that date, of a movement certificate EUR.1 issued retrospectively by the competent authorities of the exporting State together with the documents showing that the goods have been transported directly. Annex I **INTRODUCTORY NOTES TO THE LIST IN ANNEX II** The list sets out the conditions required for all products to be considered as sufficiently worked or processed within the meaning of Article 5 of the Protocol. 2.1. The first two columns in the list describe the product obtained. The first column gives the heading number or chapter number used in the Harmonised System and the second column gives the description of goods used in that system for that heading or chapter. For each entry in the first two columns a rule is specified in columns 3 or 4. Where, in some cases, the entry in the first column is preceded by an "ex", this signifies that the rules in columns 3 or 4 apply only to the part of that heading as described in column 2. 2.2. Where several heading numbers are grouped together in column 1 or a chapter number is given and the description of products in column 2 is therefore given in general terms, the adjacent rules in columns 3 or 4 apply to all products which, under the Harmonised System, are classified in headings of the chapter or in any of the headings grouped together in column 1. 2.3. Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rules in columns 3 or 4. 2.4. Where, for an entry in the first two columns, a rule is specified in both columns 3 and 4, the exporter may opt, as an alternative, to apply either the rule set out in column 3 or that set out in column 4. If no origin rule is given in column 4, the rule set out in column 3 has to be applied. 3.1. The provisions of Article 5 of the Protocol concerning products having acquired originating status which are used in the manufacture of other products apply regardless of whether this status has been acquired inside the factory where these products are used or in another factory in the Community or in Jordan. Example An engine of heading No. 8407, for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40% of the ex-works price, is made from "other alloy steel roughly shaped by forging" of heading No. ex 7224. If this forging has been forged in the Community from a non-originating ingot, it has already acquired originating status by virtue of the rule for heading No. ex 7224 in the list. The forging can then count as originating in the value calculation for the engine regardless of whether it was produced in the same factory or in another factory in the Community. The value of the non-originating ingot is thus not taken into account when adding up the value of the non-originating materials used. 3.2. The rule in the list represents the minimum amount of working or processing required and the carrying-out of more working or processing also confers originating status; conversely, the carrying-out of less working or processing cannot confer originating status. Thus if a rule provides that non-originating material at a certain level of manufacture may be used, the use of such material at an earlier stage of manufacture is allowed and the use of such material at a later stage is not. 3.3. Without prejudice to note 3.2 where a rule states that "materials of any heading" may be used, materials of the same heading as the product may also be used, subject, however, to any specific limitations which may also be contained in the rule. However, the expression "manufacture from materials of any heading, including other materials of heading No..." means that only materials classified in the same heading as the product of a different description than that of the product as given in column 2 of the list may be used. 3.4. When a rule in the list specifies that a product may be manufactured from more than one material, this means that any one or more materials may be used. It does not require that all be used. Example The rule for fabrics of heading Nos. 5208 to 5212 provides that natural fibres may be used and that chemical materials, among other materials, may also be used. This does not mean that both have to be used; it is possible to use one or the other or both. 3.5. Where a rule in the list specifies that a product must be manufactured from a particular material, the condition obviously does not prevent the use of other materials which, because of their inherent nature, cannot satisfy the rule. (See also note 6.2 in relation to textiles). Example The rule for prepared foods of heading No. 1904 which specifically excludes the use of cereals and their derivatives does not prevent the use of mineral salts, chemicals and other additives which are not products from cereals. However, this does not apply to products which, although they cannot be manufactured from the particular materials specified in the list, can be produced from a material of the same nature at an earlier stage of manufacture. Example In the case of an article of apparel of ex Chapter 62 made from non-woven materials, if the use of only non-originating yarn is allowed for this class of article, it is not possible to start from non-woven cloth, even if non-woven cloths cannot normally be made from yarn. In such cases, the starting material would normally be at the stage before yarn, that is the fibre stage. 3.6. Where, in a rule in the list, two percentages are given for the maximum value of non-originating materials that can be used, then these percentages may not be added together. In other words, the maximum value of all the non-originating materials used may never exceed the higher of the percentages given. Furthermore, the individual percentages must not be exceeded in relation to the particular materials they apply to. 4.1. The term "natural fibres" is used in the list to refer to fibres other than artificial or synthetic fibres. It is restricted to the stages before spinning takes place, including waste, and, unless otherwise specified, includes fibres that have been carded, combed or otherwise processed but not spun. 4.2. The term "natural fibres" includes horsehair of heading No. 0503, silk of heading Nos. 5002 and 5003 as well as the wool fibres, fine or coarse animal hair of heading Nos. 5101 to 5105, the cotton fibres of heading Nos. 5201 to 5203 and the other vegetable fibres of heading Nos. 5301 to 5305. 4.3. The terms "textile pulp", "chemical materials" and "paper-making materials" are used in the list to describe the materials not classified in Chapters 50 to 63, which can be used to manufacture artificial, synthetic or paper fibres or yarns. 4.4. The term "man-made staple fibres" is used in the list to refer to synthetic or artificial filament tow, staple fibres or waste, of heading Nos. 5501 to 5507. 5.1. Where for a given product in the list a reference is made to this note, the conditions set out in column 3 shall not be applied to any basic textile materials, used in the manufacture of this product, which, taken together, represent 10% or less of the total weight of all the basic textile materials used (see also notes 5.3 and 5.4). 5.2. However, the tolerance mentioned in note 5.1 may only be applied to mixed products which have been made from two or more basic textile materials. The following are the basic textile materials: - silk, - wool, - coarse animal hair, - fine animal hair, - horsehair, - cotton, - paper-making materials and paper, - flax, - true hemp, - jute and other textile bast fibres, - sisal and other textile fibres of the genus Agave, - coconut, abaca, ramie and other vegetable textile fibres, - synthetic man-made filaments, - artificial man-made filaments, - synthetic man-made staple fibres of polypropylene, - synthetic man-made staple fibres of polyester, - synthetic man-made staple fibres of polyamide, - synthetic man-made staple fibres of polyacrylonitrile, - synthetic man-made staple fibres of polyimide, - synthetic man-made staple fibres of polytetrafluoroethylene, - synthetic man-made staple fibres of polyphenylene sulphide, - synthetic man-made staple fibres of polyvinyl chloride, - other synthetic man-made staple fibres, - artificial man-made staple fibres of viscose, - other artificial man-made staple fibres, - yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped, - yarn made of polyurethane segmented with flexible segments of polyester whether or not gimped, - products of heading No. 5605 (metallised yarn) incorporating strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film, - other products of heading No. 5605. Example A yarn of heading No. 5205 made from cotton fibres of heading No. 5203 and synthetic staple fibres of heading No. 5506 is a mixed yarn. Therefore, non-originating synthetic staple fibres that do not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) may be used up to a weight of 10% of the yarn. Example A woollen fabric of heading No. 5112 made from woollen yarn of heading No. 5107 and synthetic yarn of staple fibres of heading No. 5509 is a mixed fabric. Therefore synthetic yarn which does not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) or woollen yarn that does not satisfy the origin rules (which require manufacture from natural fibres, not carded or combed or otherwise prepared for spinning) or a combination of the two may be used provided their total weight does not exceed 10% of the weight of the fabric. Example Tufted textile fabric of heading No. 5802 made from cotton yarn of heading No. 5205 and cotton fabric of heading No. 5210 is only a mixed product if the cotton fabric is itself a mixed fabric being made from yarns classified in two separate headings or if the cotton yarns used are themselves mixtures. Example If the tufted textile fabric concerned had been made from cotton yarn of heading No. 5205 and synthetic fabric of heading No. 5407, then, obviously, the yarns used are two separate basic textile materials and the tufted textile fabric is accordingly a mixed product. Example A carpet with tufts made from both artificial yarns and cotton yarns and with a jute backing is a mixed product because three basic textile materials are used. Thus, any non-originating materials that are at a later stage of manufacture than the rule allows may be used, provided their total weight does not exceed 10% of the weight of the textile materials of the carpet. Thus, both the jute backing and/or the artificial yarns could be imported at that stage of manufacture, provided the weight conditions are met. 5.3. In the case of products incorporating "yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped" this tolerance is 20% in respect of this yarn. 5.4. In the case of products incorporating "strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of an adhesive between two layers of plastic film", this tolerance is 30% in respect of this strip. 6.1. In the case of those textile products which are marked in the list by a footnote referring to this note, textile materials, with the exception of linings and interlinings, which do not satisfy the rule set out in the list in column 3 for the made-up product concerned may be used provided that they are classified in a heading other than that of the product and that their value does not exceed 8% of the ex-works price of the product. 6.2. Without prejudice to note 6.3, materials which are not classified within Chapters 50 to 63 may be used freely in the manufacture of textile products, whether or not they contain textiles. Example If a rule in the list provides that for a particular textile item, such as trousers, yarn must be used, this does not prevent the use of metal items, such as buttons, because buttons are not classified within Chapters 50 to 63. For the same reason, it does not prevent the use of slide fasteners even though slide fasteners normally contain textiles. 6.3. Where a percentage rules applies, the value of materials which are not classified within Chapters 50 to 63 must be taken into account when calculating the value of the non-originating materials incorporated. 7.1. For the purposes of heading Nos. ex 2707, 2713 to 2715, ex 2901, ex 2902 and ex 3403, the "specific processes" are the following: (a) vacuum distillation; (b) redistillation by a very thorough fractionation process <*>; --- <*> See additional explanatory note 4(b) to Chapter 27 of the Combined Nomenclature. (c) cracking; (d) reforming; (e) extraction by means of selective solvents; (f) the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite; (g) polymerisation; (h) alkylation; (i) isomerisation. 7.2. For the purposes of heading Nos. ex 2710, 2711 and 2712, the "specific processes" are the following: (a) vacuum distillation; (b) redistillation by a very thorough fractionation process <*>; --- <*> See additional explanatory note 4(b) to Chapter 27 of the Combined Nomenclature. (c) cracking; (d) reforming; (e) extraction by means of selective solvents; (f) the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite; (g) polymerisation; (h) alkylation; (ij) isomerisation; (k) in respect of heavy oils falling within heading No. ex 2710 only, desulphurisation with hydrogen resulting in a reduction of at least 85% of the sulphur content of the products processed (ASTM D 1266-59 Т method); (l) in respect of products falling within heading No. 2710 only, deparaffining by a process other than filtering; (m) in respect of heavy oils falling within heading No. ex 2710 only, treatment with hydrogen at a pressure of more than 20 bar and a temperature of more than 250 °C with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment with hydrogen of lubricating oils of heading No. ex 2710 (e.g. hydrofinishing or decolourisation) in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process; (n) in respect of fuel oils falling within heading No. ex 2710 only, atmospheric distillation, on condition that less than 30% of these products distils, by volume, including losses, at 300 °C by the ASTM D 86 method; (o) in respect of heavy oils other than gas oils and fuel oils falling within heading No. ex 2710 only, treatment by means of a high-frequency electrical brushdischarge. 7.3. For the purposes of heading Nos. ex 2707, 2713 to 2715, ex 2901, ex 2902 and ex 3403, simple operations such as cleaning, decanting, desalting, water separation, filtering, colouring, marking, obtaining a sulphur content as a result of mixing products with different sulphur contents, any combination of these operations or like operations do not confer origin. Annex II **LIST OF WORKING** **OR PROCESSING REQUIRED TO BE CARRIED** **OUT ON NON-ORIGINATING MATERIALS IN ORDER THAT** **THE PRODUCT MANUFACTURED CAN OBTAIN ORIGINATING STATUS** The products mentioned in the list may not all be covered by the Agreement. It is therefore necessary to consult the other parts of the Agreement. | HS heading No. | Description of product | Working or processing carried out on non-originating materials that confers originating status | | | --- | --- | --- | --- | | (1) | (2) | (3) or (4) | | | Chapter 1 | Live animals | All the animals of Chapter 1 used must be wholly obtained | | | Chapter 2 | Meat and edible meat offal | Manufacture in which all the materials of Chapters 1 and 2 used must be wholly obtained | | | Chapter 3 | Fish and crustaceans, molluscs and other aquatic invertebrates | Manufacture in which all the materials of Chapter 3 used must be wholly obtained | | | ex Chapter 4 | Dairy produce; birds' eggs; natural honey; edible products of animal origin, not elsewhere specified or included; except for: | Manufacture in which all the materials of Chapter 4 used must be wholly obtained | | | 0403 | Buttermilk, curdled milk and cream, yoghurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa | Manufacture in which: - all the materials of Chapter 4 used must be wholly obtained, - any fruit juice (except those of pineapple, lime or grapefruit) of heading No. 2009 used must already be originating, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | ex Chapter 5 ex 0502 | Products of animal origin, not elsewhere specified or included; except for: Prepared pigs', hogs' or boars' bristles and hair | Manufacture in which all the materials of Chapter 5 used must be wholly obtained Cleaning, disinfecting, sorting and straightening of bristles and hair | | | Chapter 6 | Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage | Manufacture in which: - all the materials of Chapter 6 used must be wholly obtained, - the value of all the materials used does not exceed 50% of the ex-works price of the product | | | Chapter 7 | Edible vegetables and certain roots and tubers | Manufacture in which all the materials of Chapter 7 used must be wholly obtained | | | Chapter 8 | Edible fruit and nuts; peel of citrus fruits or melons | Manufacture in which: - all the fruit and nuts used must be wholly obtained, - the value of any materials of Chapter 17 used does not exceed 30% of the value of the ex-works price of the product | | | ex Chapter 9 | Coffee, tea, mate and spices; except for: | Manufacture in which all the materials of Chapter 9 | | | 0901 | Coffee, whether or not roasted or decaffeinated; coffee husks and skins; coffee substitutes containing coffee in any proportion | used must be wholly obtained Manufacture from materials of any heading | | | 0902 ex 0910 | Tea, whether or not flavoured Mixtures of spices | Manufacture from materials of any heading Manufacture from materials of any heading | | | Chapter 10 | Cereals | Manufacture in which all the materials of Chapter 10 used must be wholly obtained | | | ex Chapter 11 | Products of the milling industry; malt; starches; inulin; wheat gluten; except for: | Manufacture in which all the cereals, edible vegetables, roots and tubers of heading No. 0714 or fruit used must be | | | ex 1106 | Flour, meal and powder of the dried, shelled leguminous vegetables of heading No. 0713 | wholly obtained Drying and milling of leguminous vegetables of heading No. 0708 | | | Chapter 12 | Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder | Manufacture in which all the materials of Chapter 12 used must be wholly obtained | | | 1301 | Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams) | Manufacture in which the value of any materials of heading No. 1301 used may not exceed 50% of the ex-works price of the product | | | 1302 | Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products: | | | | | - Mucilages and thickeners, modified, derived from vegetable products - Other | Manufacture from non-modified mucilages and thickeners Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | Chapter 14 | Vegetable plaiting materials; vegetable products not elsewhere specified or included | Manufacture in which all the materials of Chapter 14 used must be wholly obtained | | | ex Chapter 15 | Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animals or vegetable waxes; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | 1501 | Pig fat (including lard) and poultry fat, other than that of heading No. 0209 or 1503: | | | | 1502 | - Fats from bones or waste - Other Fats of bovine animals, sheep or goats, other than those of heading No. 1503 - Fats from bones or waste - Other | Manufacture from materials of any heading except those of heading No. 0203, 0206 or 0207 or bones of heading No. 0506 Manufacture from meat or edible offal of swine of heading No. 0203 or 0206 or of meat and edible offal of poultry of heading No. 0207 Manufacture from materials of any heading except those of heading No. 0201, 0202, 0204 or 0206 or bones of heading No. 0506 Manufacture in which all the materials of Chapter 2 used must be wholly obtained | | | 1504 | Fats and oils and their fractions, of fish or marine mammals, whether or not refined, but not chemically modified: | | | | ex 1505 | - Solid fractions - Other Refined lanolin | Manufacture from materials of any heading including other materials of heading No. 1504 Manufacture in which all the materials of Chapters 2 and 3 used must be wholly obtained Manufacture from crude wool grease of heading No. 1505 | | | 1506 | Other animal fats and oils and their fractions, whether or not refined, but not chemically modified - Solid fractions - Other | Manufacture from materials of any heading including other materials of heading No. 1506 Manufacture in which all the materials of Chapter 2 used must be wholly obtained | | | 1507 to 1515 | Vegetable oils and their fractions: | | | | 1516 | - Soya, ground nut, palm, copra, palm kernel, babassu, tung and oiticica oil, myrtle wax and Japan wax, fractions of jojoba oil and oils for technical or industrial uses other that the manufacture of foodstuffs for human consumption - Solid fractions, except for that of jojoba oil - Other Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, interesterified, re-esterified or elaidinised, whether or not refined, but not further prepared | Manufacture in which all the materials used are classified within a heading other than that of the product Manufacture from other materials of heading No. 1507 to 1515 Manufacture in which all the vegetable materials used must be wholly obtained Manufacture in which: - all the materials of Chapter 2 used must be wholly obtained, - all the vegetable materials used must be wholly obtained. However, materials of heading No. 1507, 1508, 1511 and 1513 may be used | | | 1517 | Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this chapter, other than edible fats or oils or their fractions of heading No. 1516 | Manufacture in which: - all the materials of Chapter 2 and 4 used must be wholly obtained, - all the vegetable materials used must be wholly obtained. However, materials of heading No. 1507, 1508, 1511 and 1513 may be used | | | Chapter 16 | Preparations of meat, of fish or of crustaceans, molluscs or other aquatic invertebrates | Manufacture from animals of Chapter 1. All the materials of Chapter 3 used must be wholly obtained | | | ex Chapter 17 | Sugars and sugar confectionery; except for: | Manufacture in which all the materials used are classified within a | | | ex 1701 | Cane or beet sugar and chemically pure sucrose, in solid form, flavoured or coloured | heading other than that of the product Manufacture in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | 1702 | Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel: | | | | ex 1703 | - Chemically pure maltose and fructose - Other sugars in solid form, flavoured or coloured - Other Molasses resulting from the extraction or refining of sugar, flavoured or coloured | Manufacture from materials of any heading including other materials of heading No. 1702 Manufacture in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product Manufacture in which all the materials used must already be originating Manufacture in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | 1704 | Sugar confectionery (including white chocolate), not containing cocoa | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | Chapter 18 | Cocoa and cocoa preparations | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | 1901 | Malt extract; food preparations of flour, meal, starch or malt extract, not containing cocoa or containing less than 40% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of heading No. 0401 to 0404, not containing cocoa or containing less than 5% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included: | | | | 1902 | - Malt extract - Other Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared: | Manufacture from cereals of Chapter 10 Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | 1903 | - Containing 20% or less by weight of meat, meat offal, fish, crustaceans or molluscs - Containing more than 20% by weight of meat, meat offal, fish, crustaceans or molluscs Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or in similar forms | Manufacture in which all the cereals and derivatives (except durum wheat and its derivatives) used must be wholly obtained Manufacture in which: - all cereals and derivatives (except durum wheat and its derivatives) used must be wholly obtained, - all the materials of Chapters 2 and 3 used must be wholly obtained Manufacture from materials of any heading except potato starch of heading No. 1108 | | | 1904 | Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals, other than maize (corn) in grain form, or in the form of flakes or other worked grains (except flour and meal), precooked, or otherwise prepared, not elsewhere specified or included | Manufacture: - from materials not classified within heading No. 1806, - in which all the cereals and flour (except durum wheat and its derivatives) used must be wholly obtained, - in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | 1905 | Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products | Manufacture from materials of any heading except those of Chapter 11 | | | ex Chapter 20 | Preparations of vegetables, fruit, nuts or other parts of plants; except for: | Manufacture in which all the fruit, nuts or vegetables used must be wholly obtained | | | ex 2001 ex 2004 and ex 2005 | Yams, sweet potatoes and similar edible parts of plants containing 5% or more by weight of starch, prepared or preserved by vinegar or acetic acid Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid | Manufacture in which all the materials used are classified within a heading other than that of the product Manufacture in which all the materials used are classified within a heading other than that of the product | | | 2006 | Vegetables, fruit, nuts, fruit peel and other parts of plants, preserved by sugar (drained, glace or crystallised) | Manufacture in which the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | 2007 ex 2008 | Jams, fruit jellies, marmalades, fruit or nut puree and fruit or nut pastes, being cooked preparations, whether or not containing added sugar or other sweetening matter - Nuts, not containing added sugar or spirits - Peanut butter; mixtures based on cereals; palm hearts; maize (corn) - Other except for fruit and nuts cooked otherwise than by steaming or boiling in water, not containing added sugar, frozen | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product Manufacture in which the value of the originating nuts and oil seeds of heading No. 0801, 0802 and 1202 to 1207 used exceeds 60% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | 2009 | Fruit juices and vegetable juices (including grape must), unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | ex Chapter 21 | Miscellaneous edible preparations; except for: | Manufacture in which all the materials used are classified within a | | | 2101 | Extracts, essences and concentrates, of coffee, tea or mate and preparations with a basis of these products or with a basis of coffee, tea or mate; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof | heading other than that of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product, - all the chicory used must be wholly obtained | | | 2103 | Sauces and preparations therefor; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard: | | | | ex 2104 | - Sauces and preparations therefor; mixed condiments and mixed seasonings - Mustard flour and meal and prepared mustard Soups and broths and preparations therefor | Manufacture in which all the materials used are classified within a heading other than that of the product. However, mustard flour or meal or prepared mustard may be used Manufacture from materials of any heading Manufacture from materials of any heading except prepared or preserved vegetables of heading No. 2002 to 2005 | | | 2106 | Food preparations not elsewhere specified or included | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product | | | ex Chapter 22 | Beverages, spirits and vinegar; except for: | Manufacture in which: - all the materials used | | | 2202 | Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit or vegetable juices of heading No. 2009 | are classified within a heading other than that of the product, - all the grapes or any material derived from grapes used must be wholly obtained Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of any materials of Chapter 17 used does not exceed 30% of the ex-works price of the product, - any fruit juice used (except for pineapple, lime and grapefruit juices) must already be originating | | | 2208 | Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80% vol; spirits, liqueurs and other spirituous beverages | Manufacture: - from materials not classified within heading No. 2207 or 2208, - in which all the grapes or any material derived from grapes used must be wholly obtained or if all the other materials used are already originating, arrack may be used up to a limit of 5% by volume | | | ex Chapter 23 | Residues and waste from the food industries; prepared animal fodder; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex 2301 ex 2303 ex 2306 | Whale meal; flours, meals and pellets of fish or of crustaceans, molluscs or other aquatic invertebrates, unfit for human consumption Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40% by weight Oil cake and other solid residues resulting from the extraction of olive oil, containing more than 3% of olive oil | Manufacture in which all the materials of Chapters 2 and 3 used must be wholly obtained Manufacture in which all the maize used must be wholly obtained Manufacture in which all the olives used must be wholly obtained | | | 2309 | Preparations of a kind used in animal feeding | Manufacture in which: - all the cereals, sugar or molasses, meat or milk used must already be originating, - all the materials of Chapter 3 used must be wholly obtained | | | ex Chapter 24 | Tobacco and manufactured tobacco substitutes; except for: | Manufacture in which all the materials of Chapter 24 used must be wholly obtained | | | 2402 ex 2403 | Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes Smoking tobacco | Manufacture in which at least 70% by weight of the unmanufactured tobacco or tobacco refuse of heading No. 2401 used must already be originating Manufacture in which at least 70% by weight of the unmanufactured tobacco or tobacco refuse of heading No. 2401 used must already be originating | | | ex Chapter 25 | Salt; sulphur, earths and stone; plastering materials; lime and cement; except for: | Manufacture in which all the materials used are classified within a heading other than that of | | | ex 2504 ex 2515 ex 2516 ex 2518 ex 2519 ex 2520 ex 2524 ex 2525 ex 2530 | Natural crystalline graphite, with enriched carbon content, purified and ground Marble, merely cut by sawing or otherwise into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm Granite, porphyry, basalt, sandstone and other monumental and building stone, merely cut by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm Calcined dolomite Crushed natural magnesium carbonate (magnesite), in hermetically sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead - burned (sintered) magnesia Plasters specially prepared for dentistry Natural asbestos fibres Mica powder Earth colours, calcined or powdered | the product Enriching of the carbon content, purifying and grinding of crude crystalline graphite Cutting, by sawing or otherwise, of marble (even if already sawn) of a thickness exceeding 25 cm Cutting, by sawing or otherwise, of stone (even if already sawn) of a thickness exceeding 25 cm Calcination of dolomite not calcined Manufacture in which all the materials used are classified within a heading other than that of the product. However, natural magnesium carbonate (magnesite) may be used Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture from asbestos concentrate Grinding of mica or mica waste Calcination or grinding of earth colours | | | Chapter 26 | Ores, slag and ash | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 27 | Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex 2707 ex 2709 | Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65% by volume distils at a temperature of up to 250 °C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels Crude oils obtained from bituminous minerals | Operations of refining and/or one or more specific process(es) <1> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product Destructive distillation of bituminous materials | | | 2710 | Petroleum oils and oils obtained from bituminous materials, other than crude; preparations not elsewhere specified or included, containing by weight 70% or more of petroleum oils or of oils obtained from bituminous materials, these oils being the basic constituents of the preparations | Operations of refining and/or one or more specific process(es) <2> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product | | | 2711 | Petroleum gases and other gaseous hydrocarbons | Operations of refining and/or one or more specific process(es) <2> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product | | | 2712 | Petroleum jelly; paraffin wax, microciystal-line petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes and similar products obtained by synthesis or by other processes, whether or not coloured | Operations of refining and/or one or more specific process(es) <1> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product | | | 2713 | Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous materials | Operations of refining and/or one or more specific process(es) <2> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product | | | 2714 | Bitumen and asphalt, natural; bituminous or oil shale and tar sands; asphaltites and asphaltic rocks | Operations of refining and/or one or more specific process(es) <2> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product | | | 2715 | Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch | Operations of refining and/or one or more specific process(es) <2> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product | | | ex Chapter 28 | Inorganic chemicals; organic or inorganic compounds or precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | ex 2805 ex 2811 ex 2833 ex 2840 | "Mischmetall" Sulphur trioxide Aluminium sulphate Sodium perborate | may be used provided their value does not exceed 20% of the ex-works price of the product Manufacture by electrolytic or thermal treatment in which the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture from sulphur dioxide Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture from disodium tetraborate pen-tahydrate | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | ex Chapter 29 | Organic chemicals; except for: | Manufacture in which all the materials used are | Manufacture in which the value of all the | | ex 2901 ex 2902 ex 2905 | Acyclic hydrocarbons for use as power or heating fuels Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels Metal alcoholates of alcohols of this heading and of ethanol or glycerol | classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product Operations of refining and/or one or more specific process(es) <1> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product Operations of refining and/or one or more specific process(es) <1> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product Manufacture from materials of any heading, including other materials of heading No. 2905. However, metal alcoholates of this heading may be used, provided their value does not exceed 20% of the ex-works price of the product | materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | 2915 ex 2932 | Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and per-oxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives - Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives - Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives | Manufacture from materials of any heading. However, the value of all the materials of heading No. 2915 and 2916 used may not exceed 20% of the ex-works price of the product Manufacture from materials of any heading. However, the value of all the materials of heading No. 2909 used may not exceed 20% of the ex-works price of the product Manufacture from materials of any heading | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | 2933 | Heterocyclic compounds with nitrogen heteroatom(s) only | Manufacture from materials of any heading. However, the value of all the materials of heading No. 2932 and 2933 used may not exceed 20% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | 2934 | Nucleic acids and their salts; other heterocyclic compounds | Manufacture from materials of any heading. However the value of all the materials of heading No. 2932, 2933 and 2934 used may not exceed 20% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | ex Chapter 30 | Pharmaceutical products; except for: | Manufacture in which all the materials used are | | | 3002 | Human blood; animal blood prepared for therapeutic; prophylactic or diagnostic uses; antisera and other blood fractions and modified immunological products whether or not obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products: | classified within a heading other than that of the product. However materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product | | | 3003 and | - Products consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses or unmixed products for these uses, put up in measured doses or in forms or packings for retail sale - Other - - Human blood - - Animal blood prepared for therapeutic or prophylactic uses - - Blood fractions other than antisera, haemoglobin and serum globulin - - Haemoglobin, blood globulin and serum globulin - - Other Medicaments (excluding | Manufacture from materials of any heading, including other materials of heading No. 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product Manufacture from materials of any heading, including other materials of heading No. 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product Manufacture from materials of any heading, including other materials of heading No. 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product Manufacture from materials of any heading, including other materials of heading No. 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product Manufacture from materials of any heading, including other materials of heading No. 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product Manufacture from materials of any heading, including other materials of heading No. 3002. The materials of this description may also be used, provided their value does not exceed 20% of the ex-works price of the product | | | 3004 | goods of heading No. 3002, 3005 or 3006): | | | | | - Obtained from amicacin of heading No. 2941 - Other | Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials of heading No. 3003 or 3004 may be used provided their value, taken together, does not exceed 20% of the ex-works price of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product. However, materials of heading No. 3003 or 3004 may be used provided their value, taken together, does not exceed 20% of the ex-works price of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product | | | ex Chapter 31 | Fertilisers; except for: | Manufacture in which all the materials used are | Manufacture in which the value of all the | | ex 3105 | Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorous and potassium; other fertilisers; goods of this chapter in tablets or similar forms or in packages of a gross weight not exceeding 10 kg, except for: | classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value, does not exceed 20% of the ex-works price of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product, - the value of all the materials used does not | materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | - Sodium nitrate - Calcium cyanamide - Potassium sulphate - Magnesium potassium Sulphate | exceed 50% of the ex-works price of the product | | | ex Chapter 32 | Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | ex 3201 | Tannins and their salts, esters, ethers, and other derivatives | of the ex-works price of the product Manufacture from tanning extracts of vegetable origin | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | 3205 | Colour lakes; preparations as specified in note 3 to this Chapter based on colour lakes <3> | Manufacture from materials of any heading, except heading Nos. 3203, 3204 and 3205. However, materials from heading No. 3205 may be used provided their value does not exceed 20% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | ex Chapter 33 | Essential oils and resinoids; perfumery, cosmetic or toilet preparations, except for: | Manufacture in which all the materials used are classified within a heading other than that of the product. However, | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the | | 3301 | Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils: | materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product Manufacture from materials of any heading, including materials of a different "group" <4> in this heading. However, materials of the same group may be used, provided their value does not exceed 20% of the ex-works price of the product | product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | aqueous distillates and aqueous solutions of essential oils | | | | ex Chapter 34 ex 3403 | Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, dental waxes and dental preparations with a basis of plaster; except for Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, provided they represent less than 70% by weight | Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product Operations of refining and/or one or more specific process(es) <1> or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | 3404 | Artificial waxes and prepared waxes: | | | | | - With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax - Other | Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product Manufacture from materials of any heading, except: | Manufacture in which the value of all the | | | | - hydrogenated oils having the character of waxes of heading No. 1516, - fatty acids not chemically defined or industrial fatty alcohols having the character of waxes of heading No. 3823, - materials of heading No. 3404 However, these materials may be used provided their value does not exceed 20% of the ex-works price of the product | materials used does not exceed 40% of the ex-works price of the product | | ex Chapter 35 | Albuminoidal substances; modified starches; glues; enzymes; except for: | Manufacture in which all the materials used are classified within a heading other than that of | Manufacture in which the value of all the materials used does not exceed 40% of the | | 3505 | Dextrins and other modified starches (for example, pregelatinised or esterified starches); glues based on starches, or on dextrins or other modified starches: | the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product | ex-works price of the product | | ex 3507 | - Starch ethers and esters - Other Prepared enzymes not elsewhere specified or included | Manufacture from materials of any heading, including other materials of heading No. 3505 Manufacture from materials of any heading, except those of heading No. 1108 Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | Chapter 36 | Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations | Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | ex Chapter 37 | Photographic or cinematographic goods; except for | Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | 3701 | Photographic plates and film in the flat, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitised, unexposed, whether or not in packs: | | | | 3702 | - Instant print film for colour photography, in packs - Other Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed | Manufacture in which all the materials used are classified within a heading other than heading No. 3701 or 3702. However, materials from heading No. 3702 may be used provided their value does not exceed 30% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than heading No. 3701 or 3702. However, materials from heading No. 3701 and 3702 may be used provided their value taken together, does not exceed 20% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than heading No. 3701 or 3702 | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | 3704 | Photographic plates, film paper, paperboard and textiles, exposed but not developed | Manufacture in which all the materials used are classified within a heading other than heading No. 3701 or 3704 | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | ex Chapter 38 | Miscellaneous chemical products; except for: | Manufacture in which all the materials used are | Manufacture in which the value of all the | | ex 3801 ex 3803 ex 3805 ex 3806 ex 3807 | - Colloidal graphite in suspension in oil and semi-colloidal graphite; carbonaceous pastes for electrodes - Graphite in paste form, being a mixture of more than 30% by weight of graphite with mineral oils Refined tall oil Spirits of sulphate turpentine, purified Ester gums Wood pitch (wood tar pitch) | classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which the value of all the materials of heading No. 3403 used does not exceed 20% of the ex-works price of the product Refining of crude tall oil Purification by distillation or refining of raw spirits of sulphate turpentine Manufacture from resin acids Distillation of wood tar | materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | 3808 | Insecticides, rodenticides, fungicides, herbicides, anti - sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms of packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and flypapers) | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3809 | Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3810 | Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3811 | Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils: | | | | 3812 | - Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals - Other Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics | Manufacture in which the value of all the materials of heading No. 3811 used does not exceed 50% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3813 | Preparations and charges for fireextinguishers; charged fireextinguishing grenades | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3814 | Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3818 | Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3819 | Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70% by weight of petroleum oils or oils obtained from bituminous minerals | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3820 | Anti-freezing preparations and prepared deicing fluids | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3822 | Diagnostic or laboratory reagents on a backing and prepared diagnostic or laboratory reagents, whether or not on a backing, other than those of heading No. 3002 or 3006 | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 3823 | Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols - Industrial monocarboxylic fatty acids, acid oils from refining - Industrial fatty alcohols | Manufacture in which all the materials used are classified within a heading other than that of the product Manufacture from materials of any heading including other materials of heading No. 3823 | | | 3824 | Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: | | | | | - The following of this heading: | Manufacture in which all the materials used are | Manufacture in which the value of all the | | | Prepared binders for foundry moulds or cores based on natural resinous products Naphthenic acids, their water insoluble salts and their esters Sorbitol, other than that of heading No. 2905 Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Ion exchangers Getters for vacuum tubes Alkaline iron oxide for the purification of gas Ammoniacal gas liquors and spent oxide produced in coal gas purification Sulphonaphthenic acids, their water insoluble salts and their esters Fusel oil and Dippel's oil Mixtures of salts having different anions Copying pastes with a basis of gelatin, whether or not on a paper or textile backing - Other | classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | materials used does not exceed 40% of the ex-works price of the product | | 3901 to 3915 | Plastics in primary forms, waste, parings and scrap, of plastic; except for heading Nos. ex 3907 and 3912 for which the rules are set out below: | | | | ex 3907 | - Addition homopolymerisation products in which a single monomer contributes more than 99% by weight to the total polymer content - Other Copolymer, made from polycarbonate and aciylonitrilebutadiene- styrene copolymer (ABS) - Polyester | Manufacture in which: - the value of all the materials used does not exceed 50% of the ex-works price of the product, - the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product <5> Manufacture in which the value of the materials of Chapter 39 used does not exceed 20% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50% of the ex-works price of the product <5> Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product and/ or manufacture from polycarbonate of tetrabromo-(bisphenol A) | Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product | | 3912 | Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms | Manufacture in which the value of any materials classified in the same heading as the product does not exceed 20% of the ex-works price of the product | | | 3916 to 3921 | Semi-manufactures and articles of plastics; except for heading Nos. ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below: | | | | | - Flat products, further worked than only surfaceworked or cut into forms other than rectangular (including square); other products, further worked than only surface worked - Other: | Manufacture in which the value of any materials of Chapter 39 used does not exceed 50% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product | | ex 3916 and ex 3917 ex 3920 ex 3921 | - - Addition homopolymerisation products in which a single monomer contributes more than 99% by weight to the total polymer content - - Other Profile shapes and tubes - Ionomer sheet or film - Sheets of regenerated cellulose, polyamides or polyethylene - Foils of plastic, metallised | Manufacture in which: - the value of all the materials used does not exceed 50% of the ex-works price of the product, - the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product <5> Manufacture in which the value of any materials of Chapter 39 used does not exceed 20% of the ex-works price of the product <5> Manufacture in which: - the value of all the materials used does not exceed 50% of the ex-works price of the product, - the value of any materials classified within the same heading as the product does not exceed 20% of the ex-works price of the product Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and methacrylic acid partly neutralised with metal ions, mainly zinc and sodium Manufacture in which the value of any materials classified in the same heading as the product does not exceed 20% of the ex-works price of the product Manufacture from highly transparent polyester foils with a thickness of less than 23 micron <6> | Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex-works price of the product | | 3922 to 3926 | Articles of plastics | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | ex Chapter 40 | Rubber and articles thereof; except for: | Manufacture in which all the materials used are | | | ex 4001 | Laminated slabs or crepe rubber for shoes | classified within a heading other than that of the product Lamination of sheets of natural rubber | | | 4005 | Compound rubber, unvulcanised, in primary forms or in plates, sheets or strip | Manufacture in which the value of all the materials used, except natural rubber, does not exceed 50% of the ex-works price of the product | | | 4012 | Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, interchangeable tyre treads and tyre flaps of rubber: | | | | ex 4017 | - Retreaded pneumatic, solid or cushion tyres, of rubber - Other Articles of hard rubber | Retreading of used tyres Manufacture from materials of any heading, except those of heading No. 4011 or 4012 Manufacture from hard rubber | | | ex Chapter 41 | Raw hides and skins (other than furskins) and leather; except for: | Manufacture in which all the materials used are classified within a heading other than that | | | ex 4102 | Raw skins of sheep or lambs, without wool on | of the product Removal of wool from sheep or lamb skins, with wool on | | | 4104 to 4107 | Leather, without hair or wool, other than leather of heading No. 4108 or 4109 | Retanning of pre-tanned leather or Manufacture in which all the materials used are classified within a heading other than that of the product | | | 4109 | Patent leather and patent laminated leather; metallised leather | Manufacture from leather of heading Nos. 4104 to 4107 provided its value does not exceed 50% of the ex-works price of the product | | | Chapter 42 | Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut) | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 43 | Furskins and artificial fur; manufactures thereof; except for: | Manufacture in which all the materials used are classified within a heading other than that | | | ex 4302 | Tanned or dressed furskins, assembled: | of the product | | | 4303 | - Plates, crosses and similar forms - Other Articles of apparel, clothing accessories and other articles of furskin | Bleaching or dyeing, in addition to cutting and assembly of non-assembled, tanned or dressed furskins Manufacture from non - assembled, tanned or dressed furskins Manufacture from non - assembled, tanned or dressed furskins of heading No. 4302 | | | ex Chapter 44 | Wood and articles of wood; wood charcoal; except for: | Manufacture in which all the materials used are classified within a | | | ex 4403 ex 4407 ex 4408 ex 4409 | Wood roughly squared Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or fingerjointed Veneer sheets and sheets for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or fingerjointed Wood continuously shaped along any of its edges or faces, whether or not planed, sanded or fingerjointed: | heading other than that of the product Manufacture from wood in the rough, whether or not stripped of its bark or merely roughed down Planing, sanding or finger-jointing Splicing, planing, sanding or finger-jointing | | | ex 4410 to ex 4413 ex 4415 ex 4416 ex 4418 ex 4421 | - Sanded or fingerjointed - Beadings and mouldings Beadings and mouldings, including moulded skirting and other moulded boards Packing cases, boxes, crates, drums and similar packings, of wood Casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood - Builders' joinery and carpentry of wood - Beadings and mouldings Match splints; wooden pegs or pins for footwear | Sanding or finger-jointing Beading or moulding Beading or moulding Manufacture from boards not cut to size Manufacture from riven staves, not further worked than sawn on the two principal surfaces Manufacture in which all the materials used are classified within a heading other than that of the product. However, cellular wood panels, shingles and shakes may be used Beading or moulding Manufacture from wood of any heading except drawn wood of heading No. 4409 | | | ex Chapter 45 4503 | Cork and articles of cork; except for: Articles of natural cork | Manufacture in which all the materials used are classified within a heading other than that of the product Manufacture from cork of heading No. 4501 | | | Chapter 46 | Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork | Manufacture in which all the materials used are classified within a heading other than that of the product | | | Chapter 47 | Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 48 | Paper and paperboard; articles of paper pulp, of paper or of paperboard; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex 4811 | Paper and paperboard, ruled, lined or squared only | Manufacture from paper - making materials of Chapter 47 | | | 4816 | Carbon paper, self - copy paper and other copying or transfer papers (other than those of heading No. 4809), duplicator stencils and offset plates, of paper, whether or not put up in boxes | Manufacture from paper - making materials of Chapter 47 | | | 4817 ex 4818 ex 4819 ex 4820 ex 4823 | Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery Toilet paper Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres Letter pads Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape | Manufacturing in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture from paper - making materials of Chapter 47 Manufacturing in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture from paper - making materials of Chapter 47 | | | ex Chapter 49 | Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | 4909 | Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings | Manufacture from materials not classified within heading No. 4909 or 4911 | | | 4910 | Calendars of any kind, printed, including calender blocks: | Manufacturing in which: - all the materials used are classified within a | | | | - Calendars of the "perpetual" type or with replaceable blocks mounted on bases other than paper or paperboard - Other | heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture from materials not classified in heading No. 4909 or 4911 | | | ex Chapter 50 ex 5003 | Silk; except for: Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed | Manufacture in which all the materials used are classified within a heading other than that of the product Carding or combing of silk waste | | | 5004 to ex 5006 | Silk yarn and yarn spun from silk waste | Manufacture from <7>: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - other natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials | | | 5007 | Woven fabrics of silk or of silk waste: | | | | | - Incorporating rubber thread - Other | Manufacture from single yarn <7> Manufacture from <7>: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | ex Chapter 51 | Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for: | Manufacture in which all the materials used are classified within a heading other than that of | | | 5106 to 5110 | Yarn of wool, of fine or coarse animal hair or of horsehair | the product Manufacture from <7>: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials | | | 5111 to 5113 | Woven fabrics of wool, of fine or coarse animal hair or of horsehair: | | | | | - Incorporating rubber thread - Other | Manufacture from single yarn <7> Manufacture from <7>: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper or printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | ex Chapter 52 | Cotton; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | 5204 to 5207 | Yarn and thread of cotton | Manufacture from <7>: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials | | | 5208 to 5212 | Woven fabrics of cotton: | | | | | - Incorporating rubber thread - Other | Manufacture from single yarn <7> Manufacture from <7>: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper or printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | ex Chapter 53 | Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | 5306 to 5308 | Yarn of other vegetable textile fibres; paper yarn | Manufacture from <7>: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials | | | 5309 to 5311 | Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn: | | | | | - Incorporating rubber thread - Other | Manufacture from single yarn <7> Manufacture from <7>: - coir yarn, - natural fibres. - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper or printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | 5401 to 5406 | Yarn, monofilament and thread of man-made filaments | Manufacture from <7>: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials | | | 5407 and 5408 | Woven fabrics of man - made filament yarn: | | | | | - Incorporating rubber thread - Other | Manufacture from single yarn <7> Manufacture from <7>: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper or printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | 5501 to 5507 | Man-made staple fibres | Manufacture from chemical materials or textile pulp | | | 5508 to 5511 | Yarn and sewing thread of man-made staple fibres | Manufacture from <7>: - raw silk or silk waste carded or combed or otherwise prepared for spinning, - natural fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper-making materials | | | 5512 and 5516 | Woven fabrics of man - made filament yarn: | | | | | - Incorporating rubber thread - Other | Manufacture from single yarn <7> Manufacture from <7>: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, - chemical materials or textile pulp, or - paper or printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | ex Chapter 56 | Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for: | Manufacture from <7>: - coir yarn, - natural fibres, - chemical materials or textile pulp, or - paper-making materials | | | 5602 | Felt, whether or not impregnated, coated, covered or laminated: | | | | | - Needleloom felt | Manufacture from <7>: - natural fibres, - chemical materials or textile pulp However: | | | 5604 | - Other Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading No. 5404 or 5405, impregnated, coated, covered or sheathed with rubber or plastics: | - polypropylene filament of heading No. 5402, - polypropylene fibres of heading No. 5503 or 5506, or - polypropylene filament tow of heading No. 5501, of which the denomination in all cases of a single filament or fibre is less than 9 decitex may be used provided their value does not exceed 40% of the ex - works price of the product Manufacture from <7>: - natural fibres, - man-made staple fibres made from case in, or - chemical materials or textile pulp | | | 5605 | - Rubber thread and cord, textile covered - Other Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading No. 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal | Manufacture from rubber thread or cord, not textil covered Manufacture from <7>: - natural fibres not carded or combed or otherwise processed for spinning, - chemical materials or textile pulp, or - paper-making materials Manufacture from <7>: - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, - chemical materials or textile pulp, or - paper-making materials | | | 5606 | Gimped yarn, and strip and the like of heading No. 5404 or 5405, gimped (other than those of heading No. 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn; loop wale-yarn | Manufacture from <7>: - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, - chemical materials or textile pulp, or - paper-making materials | | | Chapter 57 | Carpets and other textile floor coverings - Of needleloom felt - Of other felt - Other | Manufacture from <7>: - natural fibres, or - chemical materials or textile pulp However: - polypropylene filament of heading No. 5402, polypropylene fibres of heading No. 5503 or 5506, or - polypropylene filament tow of heading No. 5501, of which the denomination in all cases of a single filament or fibre is less than 9 decitex may be used provided their value does not exceed 40% of the ex - works price of the product Manufacture from <7>: - natural fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp Manufacture from <7>: - coir yarn, - synthetic or artificial filament yarn, - natural fibres, or - man-made staple fibres not carded or combed or otherwise processed for spinning, | | | ex Chapter 58 | Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for: | | | | 5805 | - Combined with rubber thread - Other Hand-woven tapestries of the types Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up | Manufacture from single yarn <7> Manufacture from <7>: - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp, or printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product | | | 5810 | Embroidery in the piece, in strips or in motifs | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 5901 | Textile fabrics coated with gum or amylaceous substances of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations | Manufacture from yarn | | | 5902 | Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon: | | | | 5903 | - Containing not more than 90% by weight of textile materials - Other Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading No. 5902 | Manufacture from yarn Manufacture from chemical materials or textile pulp Manufacture from yarn or printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | 5904 | Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape | Manufacture from yarn | | | 5905 | Textile wall coverings: | | | | 5906 | - Impregnated, coated, covered or laminated with rubber, plastics or other materials - Other Rubberised textile fabrics, other than those of heading No. 5902: | Manufacture from yarn Manufacture from <7>: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, or - chemical materials or textile pulp, or printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | 5907 | - Knitted or crocheted fabrics - Other fabrics made of synthetic filament yarn, containing more than 90% by weight of textile materials - Other Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio backcloths or the like | Manufacture from <7>: - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp Manufacture from chemical materials Manufacture from yarn Manufacture from yarn or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5% of the ex-works price of the product | | | 5908 | Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefore, whether or not impregnated: | | | | 5909 to 5911 | - Incandescent gas mantles, impregnated - Other Textile articles of a kind suitable for industrial use: | Manufacture from tubular knitted gas mantle fabric Manufacture in which all the materials used are classified within a heading other than that of the product | | | | - Polishing discs or rings other than of felt of heading No. 5911 - Woven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading No. 5911 - Other | Manufacture from yarn or waste fabrics or rags of heading No. 6310 Manufacture from <7>: - coir yarn, - the following materials: - yarn of polytetrafluoroethylene <8>, - yarn, multiple, of polyamide, coated impregnated or covered with a phenolic resin, - yarn of synthetic textile fibres of aromatic polyamides, obtained by polycondensation of m-phenylene-diamine and isophthalic acid, - monofil of polytetrafluoroethylene <8>, - yarn of synthetic textile fibres of poly-p-phenylene terephthalamide, - glass-fibre yarn, coated with phenol resin and gimped with acrylic yarn <8> - copolyester monofilaments of a polyester and a resin of terephthalic acid and 1,4 cyclohexaned-incthanol and isophthalic acid, - natural fibres, - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp Manufacture from <7>: - coir yarn, - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, or - chemical materials or textile pulp | | | Chapter 60 | Knitted or crocheted fabrics | Manufacture from <7>: - natural fibres - man-made staple fibres not carded or combed or otherwise processed for spinning, or - chemical materials or textile pulp | | | Chapter 61 | Articles of apparel and clothing accessories, knitted or crocheted: - Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form - Other | Manufacture from yarn <7> <9> Manufacture from <7>: - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, or - chemical materials or textile pulp | | | ex Chapter 62 | Articles of apparel and clothing accessories, not knitted or crocheted; except for: | Manufacture from yarn <7> <9> | | | ex 6202, ex 6204, ex 6206, ex 6209 and ex 6211 ex 6210 and ex 6216 | Women's, girls' and babies' clothing and clothing accessories for babies, embroidered Fire-resistant equipment of fabric covered with foil of aluminised polyester | Manufacture from yarn <9> or manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40% of the ex-works price of the product <9> Manufacture from yarn <9> or manufacture from uncoated fabric provided the value of the uncoated fabric used does not exceed 40% of the ex-works price of the product <9> | | | 6213 and 6214 | Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like: | | | | 6217 | - Embroidered - Other Other made-up clothing accessories; parts of garments or of clothing accessories, other than those of heading No. 6212: | Manufacture from unbleached single yarn <7> <9> or manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40% of the ex-works price of the product <9> Manufacture from unbleached single yarn <7> <9> or making up followed by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink-resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted goods of heading Nos. 6213 and 6214 used does not exceed 47,5% of the ex-works price of the product <9> | | | | - Embroidered - Fire-resistant equipment of fabric covered with foil of aluminised polyester - Interlinings for collars and cuffs, cut out - Other | Manufacture from yarn <9> or manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40% of the ex-works price of the product <9> Manufacture from yarn <9> or manufacture from uncoated fabric provided the value of the uncoated fabric used does not exceed 40% of the ex-works price of the product <9> Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture from yarn <9> | | | ex Chapter 63 | Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | 6301 to 6304 | Blankets, travelling rags, bed linen, etc.; curtains etc.; other furnishing articles: | | | | | - Of felt, of non - wovens - Other: | Manufacture from <7>: - natural fibres, or - chemical materials or textile pulp | | | 6305 | - Embroidered - Other Sacks and bags, of a kind used for the packing of goods | Manufacture from unbleached single yarn <9> <10> or manufacture from unembroidered fabric (other than knitted or crocheted) provided the value of the unembroidered fabric used does not exceed 40% of the ex-works price of the product Manufacture from unbleached single yarn <9> <10> Manufacture from <7>: - natural fibres, - man-made staple fibres not carded or combed or otherwise prepared for spinning, or - chemical materials or textile pulp | | | 6306 | Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or landcraft; camping goods: | | | | 6307 | - Of non-wovens - Other Other made-up articles, including dress patterns | Manufacture from <7> <9>: - natural fibres, or - chemical materials or textile pulp Manufacture from unbleached single yarn <7> <9> Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 6308 | Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes or similar textile articles, put up in packings for retail sale | Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non - originating articles may be incorporated provided their total value does not exceed 15% of the ex - works price of the set | | | ex Chapter 64 | Footwear; gaiters and the like; except for: | Manufacture from materials of any headings except for | | | 6406 | Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable insoles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof | assemblies of uppers affixed to inner soles or to other sole components of heading No. 6406 Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 65 | Headgear and parts thereof, except for: | Manufacture in which all the materials used are | | | 6503 | Felt hats and other felt headgear, made from the hat bodies, hoods or plateaux of heading No. 6501, whether or not lined or trimmed | classified within a heading other than that of the product Manufacture from yarn or textile fibres <9> | | | 6505 | Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hairnets of any material, whether or not lined or trimmed | Manufacture from yarn or textile fibres <9> | | | ex Chapter 66 | Umbrellas, sun umbrellas, walking sticks, seat sticks, whips, riding crops and parts thereof; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | 6601 | Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas) | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | Chapter 67 | Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 68 | Articles of stone, plaster, cement, asbestos, mica or similar materials; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex 6803 ex 6812 ex 6814 | Articles of slate or of agglomerated slate Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials | Manufacture from worked slate Manufacture from materials of any heading Manufacture from worked mica (including agglomerated or reconstituted mica) | | | Chapter 69 | Ceramic products | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 70 | Glass and glassware; except for: | Manufacture in which all the materials used are | | | ex 7003, ex 7004 and ex 7005 | Glass with a non - reflecting layer | classified within a heading other than that of the product Manufacture from materials of heading No. 7001 | | | 7006 | Glass of heading Nos. 7003, 7004 or 7005, bent, edgeworked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials | Manufacture from materials of heading No. 7001 | | | 7007 | Safety glass, consisting of toughened (tempered) or laminated glass | Manufacture from materials of heading No. 7001 | | | 7008 | Multiple-walled insulating units of glass | Manufacture from materials of heading No. 7001 | | | 7009 | Glass mirrors whether or not framed, including rear-view mirrors | Manufacture from materials of heading No. 7001 | | | 7010 | Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass | Manufacture in which all the materials used are classified within a heading other than that of the product or cutting of glassware, provided the value of the uncut glassware does not exceed 50% of the ex-works price of the product | | | 7013 ex 7019 | Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading No. 7010 or 7018) Articles (other than yarn) of glass fibres | Manufacture in which all the materials used are classified within a heading other than that of the product or cutting of glassware, provided the value of the uncut glassware does not exceed 50% of the ex-works price of the product or Hand-decoration (with the exception of silk-screen printing) of hand-blown glassware, provided the value of the hand-blown glassware does not exceed 50% of the ex-works price of the product Manufacture from: - uncoloured slivers, rovings, yarn or chopped strands, or - glass wool | | | ex Chapter 71 | Natural or cultured pearls, precious or semiprecious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex 7101 ex 7102, ex 7103 and ex 7104 | Natural or cultured pearls, graded and temporarily strung for convenience of transport Worked precious or semi-precious stones (natural, synthetic or reconstructed) | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture from unworked precious or semi-precious stones | | | 7106, 7108 and 7110 ex 7107, ex 7109 and ex 7111 | Precious metals: - Unwrought Semi-manufactured or in powder form Metals clad with precious metals, semi-manufactured | Manufacture from materials not classified within heading No. 7106, 7108 or 7110 or electrolytic, thermal or chemical separation of precious metals of heading No. 7106, 7108 or 7110 or alloying of precious metals of heading No. 7106, 7108 or 7110 with each other or with base metals Manufacture from unwrought precious metals Manufacture from metals clad with precious metals, unwrought | | | 7116 | Articles of natural or cultured pearls, precious or semi - precious stones (natural, synthetic or reconstructed) | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 7117 | Imitation jewellery | Manufacture in which all the materials used are classified within a heading other than that of the product or manufacture from base metal parts, not plated or covered with precious metals, provided the value of all the materials used does not exceed 50% of the ex-works price of the product | | | ex Chapter 72 | Iron and steel; except for: | Manufacture in which all the materials used are | | | 7207 | Semi-finished products of iron or non-alloy steel | classified within a heading other than that of the product Manufacture from materials of heading Nos. 7201, 7202, 7203, 7204 or 7205 | | | 7208 to 7216 | Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel | Manufacture from ingots or other primary forms of heading No. 7206 | | | 7217 ex 7218, 7219 to 7222 | Wire of iron or non - alloy steel Semi-finished products, flat-rolled products, bars and rods, angles, shapes and sections of stainless steel | Manufacture from semi - finished materials of heading No. 7207 Manufacture from ingots or other primary forms of heading No. 7218 | | | 7223 ex 7224, 7225 to 7228 | Wire of stainless steel Semi-finished products, flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | Manufacture from semi - finished materials of heading No. 7218 Manufacture from ingots or other primary forms of heading Nos. 7206, 7218 or 7224 | | | 7229 | Wire of other alloy steel | Manufacture from semi - finished materials of heading No. 7224 | | | ex Chapter 73 | Articles of iron or steel; except for: | Manufacture in which all the materials used are | | | ex 7301 | Sheet piling | classified within a heading other than that of the product Manufacture from materials of heading No. 7206 | | | 7302 | Railway or tramway track construction materials of iron or steel, the following: | Manufacture from materials of heading No. 7206 | | | 7304, 7305 and 7306 ex 7307 | rails, checkrails and rackrails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fishplates, chairs, chair wedges, sole pates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel Tube or pipe fittings of stainless steel (ISO No. X 5 CrNiMo 1712), consisting of several parts | Manufacture from materials of heading No. 7206, 7207, 7218 or 7224 Turning, drilling, reaming, threading, debur-ring and sandblasting of forged blanks the value of which does not exceed 35% of the ex-works price of the product | | | 7308 ex 7315 | Structures (excluding prefabricated buildings of heading No. 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel Skid chains | Manufacture in which all the materials used are classified within a heading other than that of the product. However, welded angles, shapes and sections of heading No. 7301 may not be used Manufacture in which the value of all the materials of heading No. 7315 used does not exceed 50% of the ex-works price of the product | | | ex Chapter 74 | Copper and articles thereof; except for: | Manufacture in which: - all the materials used | | | 7401 | Copper mattes; cement copper (precipitated copper) | are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product | | | 7402 | Unrefined copper; copper anodes for electrolytic refining | Manufacture in which all the materials used are classified within a heading other than that of the product | | | 7403 | Refined copper and copper alloys, unwrought: | | | | 7404 | - Refined copper - Copper alloys and refined copper containing other elements Copper waste and scrap | Manufacture in which all the materials used are classified within a heading other than that of the product Manufacture from refined copper, unwrought, or waste and scrap of copper Manufacture in which all the materials used are classified within a heading other than that of the product | | | 7405 | Master alloys of copper | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 75 | Nickel and articles thereof; except for: | Manufacture in which: - all the materials used | | | 7501 to 7503 | Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy; unwrought nickel; nickel waste and scrap | are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 76 | Aluminium and articles thereof; except for: | Manufacture in which: - all the materials used | | | 7601 | Unwrought aluminium | are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium | | | 7602 ex 7616 | Aluminium waste or scrap Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium | Manufacture in which all the materials used are classified within a heading other than that of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire or expanded metal of aluminium may be used; - the value of all the materials used does not exceed 50% of the ex-works price of the product | | | Chapter 77 | Reserved for possible future use in the Harmonised System | | | | ex Chapter 78 | Lead and articles thereof; except for: | Manufacture in which: - all the materials used | | | 7801 | Unwrought lead: - Refined lead - Other | are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture from "bullion" or "work" lead Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading No. 7802 may not be used | | | 7802 | Lead waste and scrap | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 79 | Zinc and articles thereof; except for: | Manufacture in which: - all the materials used | | | 7901 | Unwrought zinc | are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading No. 7902 may not be used | | | 7902 | Zinc waste and scrap | Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 80 | Tin and articles thereof; except for: | Manufacture in which: - all the materials used | | | 8001 | Unwrought tin | are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading No. 8002 may not be used | | | 8002 and 8007 | Tin waste and scrap; other articles of tin | Manufacture in which all the materials used are classified within a heading other than that of the product | | | Chapter 81 | Other base metals; cermets; articles thereof: - Other base metals, wrought; articles thereof - Other | Manufacture in which the value of all the materials classified within the same heading as the product used does not exceed 50% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product | | | ex Chapter 82 | Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | | | 8206 | Tools of two or more of the heading Nos. 8202 to 8205, put up in sets for retail sale | Manufacture in which all the materials used are classified within a heading other than heading Nos. 8202 to 8205. However, tools of heading Nos. 8202 to 8205 may be incorporated into the set provided their value does not exceed 15% of the ex - works price of the set | | | 8207 | Interchangeable tools for hand tools, whether or not power - operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning, or screw - driving), including dies for drawing or extruding metal, and rock drilling or earth-boring tools | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8208 ex 8211 | Knives and cutting blades, for machines or for mechanical appliances Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading No. 8208 | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product. However, knife blades and handles of base metal may be used | | | 8214 | Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files) | Manufacture in which all the materials used are classified within a heading other than that of the product. However, handles of base metal may be used | | | 8215 | Spoons, forks, ladles, skimmers, cake servers, fish knives, butterknives, sugar tongs and similar kitchen or tableware | Manufacture in which all the materials used are classified within a heading other than that of the product. However, handles of base metal may be used | | | ex Chapter 83 | Miscellaneous articles of base metal; except for: | Manufacture in which all the materials used are classified within a | | | ex 8302 ex 8306 | Other mountings, fittings and similar articles suitable for buildings, and automatic door closers Statuettes and other ornaments of base metal | heading other than that of the product. Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No. 8302 may be used provided their value does not exceed 20% of the ex - works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading No. 8306 may be used provided their value does not exceed 30% of the ex - works price of the product | | | ex Chapter 84 | Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: | Manufacture in which: - all the materials used are classified within a heading other than that of the product, | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the | | ex 8401 | Nuclear fuel elements | - the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product <11> | product Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8402 | Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super heated water boilers | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8403 and ex 8404 | Central heating boilers other than those of heading No. 8402 and auxiliary plant for central heating boilers | Manufacture in which all the materials used are classified within a heading other than heading No. 8403 or 8404 | Manufacture in which the value of all the materials used does not exceed 40% of the ex - works price of the product | | 8406 | Steam turbines and other vapour turbines | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8407 | Spark-ignition reciprocating or rotary internal combustion piston engines | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8408 | Compression-ignition internal combustion piston engines (diesel or semi-diesel engines) | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8409 | Parts suitable for use solely or principally with the engines of heading No. 8407 or 8408 | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8411 | Turbo jets, turbo propellers and other gas turbines | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8412 ex 8413 ex 8414 | Other engines and motors Rotary positive displacement pumps Industrial fans, blowers and the like | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8415 | Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8418 ex 8419 | Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading No. 8415 Machines for wood, paper pulp, paper and paperboard industries | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product, - the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8420 | Calendering or other rolling machines, other than for metals or glass, and cylinders therefor | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8423 | Weighing machinery (excluding balances of a sensitivity of 5 eg or better), including weight operated counting or checking machines; weighing machine weights of all kinds | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8425 to 8428 | Lifting, handling, loading or unloading machinery | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 8431 are only used up to a value of 10% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8429 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers: | | | | 8430 ex 8431 | - Road rollers - Other Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile drivers and pile extractors; snowploughs and snowblowers Parts suitable for use solely or principally with road rollers | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 8431 are only used up to a value of 10% of the ex-works price of the product Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the value of the classified within heading materials No. 8431 are only used up to a value of 10% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8439 | Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8441 | Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8444 to 8447 ex 8448 | Machines of these headings for use in the textile industry Auxiliary machinery for use with machines of heading Nos. 8444 and 8445 | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8452 | Sewing machines, other than book-sewing machines of heading No. 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles: | | | | 8456 to 8466 | - Sewing machines (lock stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg with motor - Other Machine tools and machines and their parts and accessories of heading Nos. 8456 to 8466 | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used in assembling the head (without motor) does not exceed the value of the originating materials used, - the thread tension, crochet and zigzag mechanisms used are already originating Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8469 to 8472 | Office machines (for example, typewriters, calculating machines, automatic data - processing machines, duplicating machines, stapling machines) | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8480 | Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 8482 | Ball or roller bearings | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8484 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8485 | Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this chapter | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | ex Chapter 85 | Electrical machinery and equipment and parts thereof; sound recorders and reproducers; television image and sound recorders and reproducers, and parts and accessories of such articles; except for: | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8501 | Electric motors and generators (excluding generating sets) | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 8503 are only used up to a value of 10% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8502 ex 8504 ex 8518 | Electric generating sets and rotary converters Power supply units for automatic data - processing machines Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; audio-frequency electric amplifiers; electric sound amplifier sets | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 8501 or 8503, taken together, are only used up to a value of 10% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8519 | Turntables (record decks), record players, cassette players and other sound reproducing apparatus, not incorporating a sound recording device | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8520 | Magnetic-tape recorders and other sound recording apparatus, whether or not incorporating a sound reproducing device | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8521 | Video recording or reproducing apparatus, whether or not incorporating a video tuner | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8522 | Parts and accessories suitable for use solely or principally with the apparatus of heading Nos. 8519 to 8521 | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8523 | Prepared unrecorded media for sound recording or similar recording of other phenomena, other than products of Chapter 37 | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8524 | Records, tapes and other recorded media for sound or other similarly recorded phenomena, including matrices and masters for the production of records, but excluding products of Chapter 37: | | | | 8525 | - Matrices and masters for the production of records - Other Transmission apparatus for radio telephony, radio telegraphy; radio broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, still image video cameras and other video camera recorders | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 8523 are only used up to a value of 10% of the ex-works price of the product Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture: | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product Manufacture in which the | | 8526 | Radar apparatus, radio navigational aid apparatus and radio remote-control apparatus | - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | value of all the materials used does not exceed 25% of the ex - works price of the product | | 8527 | Reception apparatus for radio telephony, radio telegraphy or radio broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8528 | Reception apparatus for television, whether or not incorporating radio broadcast receivers or sound or video recording or reproducing apparatus; video monitors and video projectors | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8529 | Parts suitable for use solely or principally with the apparatus of heading No. 8525 to 8528: | | | | 8535 and 8536 | - Suitable for use solely or principally with video recording or reproducing apparatus - Other Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 8538 are only used up to a value of 10% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8537 ex 8541 | Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading No. 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading No. 8517 Diodes, transistors and similar semi - conductor devices, except wafers not yet cut into chips | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 8538 are only used up to a value of 10% of the ex-works price of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8542 | Electronic integrated circuits and microas-semblies | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 8541 or 8542, taken together, are only used up to a value of 10% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 8544 | Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8545 | Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8546 | Electrical insulators of any material | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8547 | Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly other than insulators of heading No. 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8548 | Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this chapter | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | ex Chapter 86 | Railway or tramway locomotives, rolling stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electromechanical) traffic signalling equipment of all kinds; except for: | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8608 | Railway or tramway track fixtures and fittings; mechanical (including electromechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | ex Chapter 87 | Vehicles other than railway or tramway rolling stock, and parts and accessories thereof; except for: | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 8709 | Works trucks, self - propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8710 | Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehicles | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8711 | Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without sidecars; sidecars: | | | | | - With reciprocating internal combustion piston engine of a cylinder capacity: | | | | ex 8712 | - Not exceeding 50 cc - Exceeding 50 cc - Other Bicycles without ball bearings | Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture: - in which the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture from materials not classified in heading No. 8714 | Manufacture in which the value of all the materials used does not exceed 20% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8715 | Baby carriages and parts thereof | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 8716 | Trailers and semi - trailers; other vehicles, not mechanically propelled; parts thereof | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | ex Chapter 88 | Aircraft, spacecraft, and parts thereof; except for: | Manufacture in which all the materials used are classified within a | Manufacture in which the value of all the materials used does not | | ex 8804 | Rotochutes | heading other than that of the product Manufacture from materials of any heading including other materials of heading No. 8804 | exceed 40% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex - works price of the product | | 8805 | Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles | Manufacture in which all the materials used are classified within a heading other than that of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | Chapter 89 | Ships, boats and floating structures | Manufacture in which all the materials used are classified within a heading other than that of the product. However, hulls of heading No. 8906 may not be used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | ex Chapter 90 | Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9001 | Optical fibres and optical fibre bundles; optical fibre cables other than those of heading No. 8544; sheets and plates of polarising material, lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked | price of the product Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9002 | Lenses, prisms, mirrors and other optical elements, of any materials, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9004 ex 9005 ex 9006 | Spectacles, goggles and the like, corrective, protective or other Binoculars, monoculars, other optical telescopes, and mountings therefor, except for astronomical refracting telescopes and mountings therefor Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than electrically ignited flashbulbs | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product, - the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product, - the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9007 | Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product, - the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9011 ex 9014 | Compound optical microscopes, including those for photomicrography, cinephoto-micrography or microprojection Other navigational instruments and appliances | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product, - the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9015 | Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefmders | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9016 | Balances of a sensitivity of 5 eg or better, with or without weights | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9017 | Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators): | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | | instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers) not specified or included elsewhere in this chapter | | | | 9018 | Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electromedical apparatus and sight - testing instruments: | | | | 9019 | - Dentists' chairs incorporating dental appliances or dentists' spittoons - Other Mechanotherapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus | Manufacture from materials of any heading, including other materials of heading No. 9018 Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 9020 | Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 25% of the ex - works price of the product | | 9024 | Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics) | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9025 | Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psy - chrometers, recording or not, and any combination of these instruments | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9026 | Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading No. 9014, 9015, 9028 or 9032 | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9027 | Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9028 | Gas, liquid or electricity supply or production meters, including calibrating meters therefor: | | | | 9029 | - Parts and accessories - Other Revolution counters, production counters, taximeters, milometers, pedometers and the like; speed indicators and tachometers, other than those of heading No. 9014 or 9015; stroboscopes | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which: - the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9030 | Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading No. 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9031 | Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9032 | Automatic regulating or controlling instruments and apparatus | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | 9033 | Parts and accessories (not specified or included elsewhere in this Chapter) for machines, appliances, instruments or apparatus of Chapter 90 | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | ex Chapter 91 | Clocks and watches and parts thereof; except for: | Manufacture in which the value of all the materials used does not exceed 40% | | | 9105 | Other clocks | of the ex-works price of the product Manufacture in which: - the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9109 | Clock movements, complete and assembled | Manufacture in which: - the value of all the materials used does not exceed 40% of the ex-works price of the product, - where the value of all the non-originating materials used does not exceed the value of the originating materials used | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9110 | Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements | Manufacture in which: - the value of all the materials used does not exceed 40% of the ex-works price of the product, - where, within the above limit, the materials classified within heading No. 9114 are only used up to a value of 10% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9111 | Watch cases and parts thereof | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9112 | Clock cases and cases of a similar type for other goods of this chapter, and parts thereof | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 40% of the ex-works price of the product | Manufacture in which the value of all the materials used does not exceed 30% of the ex - works price of the product | | 9113 | Watch straps, watch bands and watch bracelets, and parts thereof: | | | | | - Of base metal, whether or not plated, or of clad precious metal - Other | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | Chapter 92 | Musical instruments; parts and accessories of such articles | Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product | | | Chapter 93 | Arms and ammunition; parts and accessories thereof | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | ex Chapter 94 | Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like; prefabricated buildings; except for: | Manufacture in which all the materials used are classified within a heading other than that of the product | Manufacture in which the value of all the materials used does not exceed 40% of the ex - works price of the product | | ex 9401 and ex 9403 | Base metal furniture, incorporating unstuffed cotton cloth of a weight of 2 300 g/m or less | Manufacture in which all the materials used are classified in a heading other than that of the product or manufacture from cotton cloth already made up in a form ready for use of heading No. 9401 or 9403, provided: | Manufacture in which the value of all the materials used does not exceed 40% of the ex - works price of the product | | 9405 | Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included | - its value does not exceed 25% of the ex-works price of the product, - all the other materials used are already originating and are classified in a heading other than heading No. 9401 or 9403 Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 9406 | Prefabricated buildings | Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | ex Chapter 95 | Toys, games and sports requisites; parts and accessories thereof; except for: | Manufacture in which all the materials used are classified within a heading other than that of | | | 9503 ex 9506 | Other toys: reduced - size ("scale") models and similar recreational models, working or not; puzzles of all kinds Golf clubs and parts thereof | the product Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which all the materials used are classified within a heading other than that of the product. However, roughly shaped blocks for making golf club heads may be used | | | ex Chapter 96 | Miscellaneous manufactured articles; except for: | Manufacture in which all the materials used are classified within a | | | ex 9601 and ex 9602 ex 9603 | Articles of animal, vegetable or mineral carving materials Brooms and brushes (except for besoms and the like and brushes made from marten or squirrel hair); hand - operated mechanical floor sweepers, not motorised, paint pads and rollers, squeegees and mops | heading other than that of the product Manufacture from "worked" carving materials of the same heading Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 9605 | Travel sets for personal toilet, sewing or shoe or clothes cleaning | Each item in the set must satisfy the rule, which would apply to it if it were not included in the set. However, non - originating articles may be incorporated, provided their total value does not exceed 15% of the ex-works price of the set | | | 9606 | Buttons, press - fasteners, snap - fasteners and press studs, button moulds and other parts of these articles, button blanks | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product | | | 9612 ex 9613 ex 9614 | Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink pads, whether or not inked, with or without boxes Lighters with piezo - igniter Smoking pipes and pipe bowls | Manufacture in which: - all the materials used are classified within a heading other than that of the product, - the value of all the materials used does not exceed 50% of the ex-works price of the product Manufacture in which the value of all the materials of heading No. 9613 used does not exceed 30% of the ex-works price of the product Manufacture from roughly shaped blocks | | | Chapter 97 | Works of art, collectors' pieces and antiques | Manufacture in which all the materials used are classified within a heading other than that of the product | | --- <1> For the special conditions relating to "specific processes" see introductory notes 7.1 and 7.3. <2> For the special conditions relating to "specific processes" see introductory note 7.2. <3> Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacturing of colouring preparations, provided they are not classified in another heading in Chapter 32. <4> A "group" is regarded as any part of the heading separated from the rest by a semi-colon. <5> In the case of the products composed of materials classified within both heading Nos. 3901 to 3906, on the one hand, and within heading Nos. 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. <6> The following foils shall be considered as highly transparent: foils, the optical dimming of which - measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) - is less than 2%. <7> For special conditions relating to products made of a mixture of textile materials, see introductory note 5. <8> The use of this material is restricted to the manufacture of woven fabrics of a kind used in paper-making machinery. <9> See introductory note 6. <10> For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembly pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see introductory note 6. <11> This rule shall apply until 31 December 1998. Annex III **MOVEMENT CERTIFICATE EUR.1** **AND APPLICATION FOR A MOVEMENT CERTIFICATE EUR.1** 1. Each form shall measure 210 mm x 297 mm; a tolerance of up to minus 5 mm or plus 8 mm in the length may be allowed. The paper used must be white, sized for writing, not containing mechanical 2 pulp and weighing not less than 25 g/m . It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye. 2. The competent authorities of the Member States of the Community and of Jordan may reserve the right to print the forms themselves or may have them printed by approved printers. In the latter case, each form must include a reference to such approval. Each form must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number either printed or not, by which it can be identified.
1. Exporter (name, full address, country) EUR. 1 No. A 000.000
See notes overleaf before compiling this form
2. Certificate used in preferential trade between
3. Consignee (name, full address, country) (optional) ................................................................ and ................................................................ (insert appropriate countries, groups of countries or territories)
4. Country, group of countries or territory in which the products are considered as originating5. Country, group of countries or territory of destination
6. Transport details (optional) 7. Remarks
8. Item number, marks and numbers, number and kind of package <1>, description of goods9. Gross weight (kg) or other measure 3 (litres, m , etc.)10. Invoices (optional)
11. CUSTOMS ENDORSEMENT Declaration certified12. DECLARATION BY THE EXPORTER I, the undersigned, declare that the goods
Export document <2>described above meet the conditions
Form ....................... No. ......required for the issue of this certificate.
Customs office ........................
Issuing country or territory........... .......................................StampPlace and date..........................
Date...................................
(Signature)(Signature)
13. REQUEST FOR VERIFICATION, to:14. RESULT OF VERIFICATION
Verification carried out shows that this certificate <3>
was issued by the customs office indicated and that
the information contained therein is accurate.
does not meet the requirements as to authenticity
and accuracy (see remarks appended).
Verification of the authenticity and accurancy of this certificate is requested
(Place and date)(Place and date)
StampStamp
(Signature)(Signature)
--- <1> If goods are not packed, indicate number of articles or state "in bulk" as appropriate. <2> For example, import documents, movement certificates, manufacturer's declarations, etc., referring to the products used. <3> Insert X in the appropriate box. Notes 1. Certificates must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialled by the person who completed the certificate and endorsed by the customs authorities of the issuing country or territory, 2. No spaces must be left between the items entered on the certificate and each item must be preceded by an item number. A horizontal line must be drawn immediately below the last item. Any unused space must be struck through in such a manner as to make any later additions impossible. 3. Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified.
1. Exporter (name, full address, country)EUR. 1 No. A 000.000
See notes overleaf before compiling this form
2. Appiicatton for a certificate to be used in preferential trade between
3. Consignee (name, full address, country) (optional)................................................................ and ................................................................ (insert appropriate countries, groups of countries or territories)
4. Country, group of coun- 5. Country, group of tries or territory in which countries or territory the products are conside- of destination red as originating
6. Transport details (optional)7. Remarks
8. Item number, marks and numbers, number and kind of packages <1>, description of goods9. Gross weight (kg) or other measure 3 (litres, m , etc.)10. Invoices (optional)
--- <1> If goods are not packed, indicate number of articles or state "in bulk" as appropriate. I, the undersigned, exporter of the goods described overleaf, DECLARE that the goods meet the conditions required for the issue of the attached certificate; SPECIFY, as follows, the circumstances which have enabled these goods to meet the above conditions: .......................................................................................... .......................................................................................... .......................................................................................... .......................................................................................... SUBMIT the following supporting documents <1>: .......................................................................................... .......................................................................................... .......................................................................................... .......................................................................................... UNDERTAKE to submit, at the request of the appropriate authorities, any supporting evidence which these authorities may require for the purpose of issuing the attached certificate, and undertake, if required, to agree to any inspection of my accounts and to any check on the processes of manufacture of the above goods, carried out by the said authorities; REQUEST the issue of the attached certificate for these goods. ............................................... (Place and date) ............................................... (Signature) --- <1> For example, import documents, movement certificates, manufacturer's declarations, etc. referring to the products used in manufacture or the goods re-exported in the same state. Annex IV **INVOICE DECLARATION** The invoice declaration, the text of which is given below, must be made out in accordance with the footnotes. However, the footnotes do not have to be reproduced. El exportador de los productos incluidos en el presente documento (autorizacion aduanera n°. ... <1>) declare que, salvo indication en sentido contrario, estos productos gozan de un origen preferencial... <2>. Eksportoren af varer, der er omfattet af naervaerende dokument, (toldmyndighedernes tilladelse nr. ... <1>), erklaerer, at varerne, medmindre andet tydeligt er angivet, har praeferenceoprindelse i... <2>. Der Ausfuhrer (Ermachtigter Ausfuhrer; Bewilligungs-Nr.... <1>), der Waren, auf die sich dieses Handelspapier bezieht, erklart, dass diese Waren, soweit nicht anders angegeben, praferenzbegunstigte... Ursprungswaren sind <2>). Greek <*> --- <*> Текст на национальном языке не приводится. The exporter of the products covered by this document (customs authorisation No... <1>) declares that, except where otherwise clearly indicated, these products are of... preferential origin <2>. L'exportateur des produits couverts par le present document (autorisation douaniere n°... <1>), declare que, sauf indication claire du contraire, ces produits ont l'origine preferentielle... <2>. L'esportatore delle merci contemplate nel presente documento (autorizzazione doganale n. ... <1>) dichiara che, salvo indicazione contraria, le merci sono di origine preferenziale... <2>. De exporteur van de goederen waarop dit document van toepassing is (douanevergunning nr. ... <1>), verklaart dat, behoudens uitdrukkelijke andersluidende vermelding, deze goederen van preferentiele... oorsprong zijn <2>. О exportador dos produtos cobertos pelo presente documento (autorizacao aduaneira n.°... <1>), declara que, salvo indicacao expressa em contrario, estes produtos sao de origem preferencial... <2>. Tassa asiakirjassa mainittujen tuotteiden vieja (tullin lupan:o... <1>) ilmoittaa, etta nama tuotteet ovat, ellei toisin ole selvasti merkitty, etuuskohteluun oikeutettuja... alkuperatuotteita <2>. Exportoren av de varor som omfattas av detta dokument (tullmyndighetens tillstand nr. ... <1>) forsakrar att dessa varor, om inte annat tydligt markerats, har formansberattigande... ursprung <2>. Arabic <*> --- <*> Текст на национальном языке не приводится. ..................................................................... <3> (Place and date) ..................................................................... <4> (Signature of the exporter; the name of the person signing the declaration has to be indicated in clear script) --- <1> When the invoice declaration is made out by an approved exporter within the meaning of Article 21 of the Protocol, the authorisation number of the approved exporter must be entered in this space. When the invoice declaration is not made out by an approved exporter, the words in brackets shall be omitted or the space left blank. <2> Origin of products to be indicated. When the invoice declaration relates in whole or in part, to products originating in Ceuta and Melilla within the meaning of Article 36 of the Protocol, the exporter must clearly indicate them in the document on which the declaration is made out by means of the symbol "CM". <3> These indications may be omitted if the information is contained on the document itself. <4> See Article 20(5) of the Protocol. In cases where the exporter is not required to sign, the exemption of signature also implies the exemption of the name of the signatory.
Article 1
Definitions For the purposes of this Protocol: (a) "customs legislation" shall mean any legal or regulatory provisions applicable on the territories of the Parties and governing the import, export, transit of goods and their placing under any customs procedure, including measures of prohibition, restriction and control adopted by the said Parties; (b) "applicant authority" shall mean a competent administrative authority which has been appointed by a Party for this purpose and which makes a request for assistance in customs matters; (b) "requested authority" shall mean a competent administrative authority which has been appointed by a Party for this purpose and which receives a request for assistance in customs matters;
(d) "personal data" shall mean all information relating to an identified or identifiable individual. Article 2
Scope 1. The Parties shall assist each other, in the areas within their jurisdiction, in the manner and under the conditions laid down in this Protocol, in preventing, detecting and investigating operations in breach of customs legislation.
2. Assistance in customs matters, as provided for in this Protocol, shall apply to any administrative authority of the Parties which is competent for the application of this Protocol. It shall not prejudice the rules governing mutual assistance in criminal matters. Nor shall it cover information obtained under powers exercised at the request of the judicial authorities, unless those authorities so agree. Article 3
Assistance on request 1. At the request of the applicant authority, the requested authority shall furnish it with all relevant information which may enable it to ensure that customs legislation is correctly applied, including information regarding operations noted or planned which are or could be in breach of such legislation. 2. At the request of the applicant authority, the requested authority shall inform it whether goods exported from the territory of one of the Parties have been properly imported into the territory of another Party, specifying, where appropriate, the customs procedure applied to the goods. 3. At the request of the applicant authority, the requested authority shall, within the framework of its laws, take the necessary steps to ensure that a special watch is kept on: (a) natural or legal persons of whom there are reasonable grounds for believing that they are breaching or have breached customs legislation; (b) places where goods are stored in a way that gives grounds for suspecting that they are intended to supply operations in breach of customs legislation; (с) movements of goods notified as possibly giving rise to breaches of customs legislation;
(d) means of transport for which there are reasonable grounds for believing that they have been, are or might be used in operations in breach of customs legislation. Article 4
Spontaneous assistance The Parties shall provide each other, in accordance with their laws, rules and other legal instruments, with assistance if they consider that to be necessary for the correct application of customs legislation, particularly when they obtain information pertaining to: - operations which are, or appear to be in breach of such legislation and which may be of interest to the other Party, - new means or methods employed in carrying out such operations, - goods known to be subject to breaches of customs legislation, - natural or legal persons of whom there are reasonable grounds for believing that they are breaching or have breached customs legislation,
- means of transport for which there are reasonable grounds for believing that they have been, are or might be used in operations in breach of customs legislation. Article 5
Delivery/notification At the request of the applicant authority, the requested authority shall, in accordance with its legislation, take all necessary measures in order: - to deliver all documents, - to notify all decisions,
falling within the scope of this Protocol to an addressee, residing or established in its territory. In such a case Article 6(3) shall apply as far as the request is concerned. Article 6
Form and substance of requests for assistance 1. Requests pursuant to this Protocol shall be made in writing. They shall be accompanied by the documents necessary to enable compliance with the request. When required because of the urgency of the situation, oral requests may be accepted, but must be confirmed in writing as soon as possible. 2. Requests pursuant to paragraph 1 shall include the following information: (a) the applicant authority making the request; (b) the measure requested; (c) the object of and the reason for the request; (d) the laws, rules and other legal elements involved; (e) indications as exact and comprehensive as possible on the natural or legal persons who are the target of the investigations; (f) a summary of the relevant facts and of the enquiries already carried out, except in cases provided for in Article 5. 3. Requests shall be submitted in an official language of the requested authority or in a language acceptable to that authority.
4. If a request does not meet the formal requirements, its correction or completion may be requested; precautionary measures may, however, be ordered. Article 7
Execution of requests 1. In order to comply with a request for assistance, the requested authority shall proceed, within the limits of its competence and available resources, as though it were acting on its own account or at the request of other authorities of that same Party, by supplying information already possessed, by carrying out appropriate enquiries or by arranging for them to be carried out. This provision shall also apply to the administrative department to which the request has been addressed by the requested authority when the latter cannot act on its own. 2. Requests for assistance shall be executed in accordance with the laws, rules and other legal instruments of the requested Party. 3. Duly authorised officials of a Party may, with the agreement of the other Party involved and subject to the conditions laid down by the latter, obtain from the offices of the requested authority or other authority for which the requested authority is responsible, information relating to operations which are or may be in breach of customs legislation which the applicant authority needs for the purposes of this Protocol.
4. Officials of a Party may, with the agreement of the other Party involved and subject to the conditions laid down by the latter, be present at enquiries carried out in the latter's territory. Article 8
Form in which information is to be communicated 1. The requested authority shall communicate results of enquiries to the applicant authority in the form of documents, certified copies of documents, reports and the like.
2. The documents provided for in paragraph 1 may be replaced by computerised information produced in any form for the same purpose. Article 9
Exceptions to the obligation to provide assistance 1. The Parties may refuse to give assistance as provided for in this Protocol, where to do so would: (a) be likely to prejudice the sovereignty of Jordan or that of a Member State of the Community which has been asked for assistance under this Protocol; or (b) be likely to prejudice public policy, security or other essential interests, in particular in the cases referred to under Article 10(2); or (c) involve currency or tax regulations other than customs legislation; or (d) violate an industrial, commercial or professional secret. 2. Where the applicant authority requests assistance which it would itself be unable to provide if so asked, it shall draw attention to that fact in its request. It shall then be left to the requested authority to decide how to respond to such a request.
3. If assistance is refused, the decision and the reasons therefor must be notified to the applicant authority without delay. Article 10
Information exchange and confidentiality 1. Any information communicated in whatsoever form pursuant to this Protocol shall be of a confidential or restricted nature. It shall be covered by the obligation of official secrecy and shall enjoy the protection extended to like information under the relevant laws of the Party which received it and the corresponding provisions applying to the Community institutions. 2. Personal data may be exchanged only where the receiving Party undertakes to protect such data in at least an equivalent way to the one applicable to that particular case in the supplying Party. 3. Information obtained shall be used solely for the purposes of this Protocol. Where one of the Parties requests the use of such information for other purposes, it shall ask for the prior written consent of the authority which furnished the information. Moreover, it shall be subject to any restrictions laid down by that authority. 4. Paragraph 3 shall not impede the use of information in any judicial or administrative proceedings subsequently instituted for failure to comply with customs legislation. The competent authority which supplied that information shall be notified of such use.
5. The Parties may, in their records of evidence, reports and testimonies and in proceedings and charges brought before the courts, use as evidence information obtained and documents consulted in accordance with the provisions of this Protocol. Article 11
Experts and witnesses 1. An official of a requested authority may be authorised to appear, within the limitations of the authorisation granted, as an expert or witness in judicial or administrative proceedings regarding the matters covered by this Protocol in the jurisdiction of the other Party, and produce such objects, documents or authenticated copies thereof, as may be needed for the proceedings. The request for an appearance must indicate specifically on what matters and by virtue of what title or qualification the official will be questioned.
2. The authorised official shall enjoy the protection guaranteed by existing legislation to officials of the applicant authority on its territory Article 12
Assistance expenses
The Parties shall waive all claims on each other for the reimbursement of expenses incurred pursuant to this Protocol, except, as appropriate, for expenses to experts, witnesses, interpreters and translators who are not public service employees. Article 13
Application 1. The application of this Protocol shall be entrusted to the central customs authorities of Jordan, on the one hand, and the competent services of the Commission of the European Communities and, where appropriate, the customs authorities of the Member States of the Community, on the other. They shall decide on all practical measures and arrangements necessary for its application, taking into consideration rules in force in the field of data protection. They may, through the Customs Cooperation Committee, propose to the Association Council amendments which they consider should be made to this Protocol.
2. The Parties shall consult each other and subsequently keep each other informed of the detailed rules of implementation which are adopted in accordance with the provisions of this Protocol. Article 14
Complementarity Without prejudice to Article 10, the agreements on mutual assistance which have been or may be concluded between one or more Member States of the Community and Jordan do not prejudice Community provisions governing the communication between the competent services of the Commission and the customs authorities of the Member States of any information obtained in customs matters which could be of Community interest. ---